HomeMy WebLinkAboutWORK ORDER - RFP - 8286 CONSTRUCTION CONTRACTOR FOR PROJECTS AT THE WATER AND WASTEWATER TREATMENT FACILITIES (2)TANK EQUIPMENT, INC. ∙ 3752 Imperial Street, Unit F ∙ Frederick, CO 80516 ∙ 303-833-9200 ∙ Fax: 303-833-9205
Email: sales@tankequipment.com ∙ www.tankequipment.com
Page 1
March 1, 2018
Will Martin
Hydro Construction Co. Inc
77 NW frontage Road
Ft. Collins, CO 80524
Dear Will: Rev: E
Thank you for your interest in our line of Poly Processing Tanks. Below is the pricing for the Sodium
Hypochlorite Tanks going to your Drake Water Reclamation Facility Project.
Sodium Hypochlorite Crosslinked Polyethylene (IMFO) Tanks
2- 2550 gallon flat bottom dome top 1.9 SG Crosslinked Polyethylene full drain (IMFO) tanks
with OR-1000 inner surface, 7’1” D x 10’4” tall and each tank is equipped with a 24” Fume
Tight manway; 3” self-aligning fitting with 3” Flange adapter, internal drop pipe and pipe
support for fill; 3” Integrally Molded Flanged Outlet (IMFO) with a 3” (IMFO) companion
fitting and a 3” x 30” UHMWPE flexible hose for outlet; 6” thru the dome fitting with a 6”
flange adapter for vent; 4” self-aligning bolted fitting with 4” flange adapter for ultrasonic level
sensor; 2” bulkhead fitting with 2” flange adapter for level transmitter; 4” bulkhead fitting with
a 4” flange adapter for overflow; a 10’ FRP ladder with ladder bracket assembly; indoor
seismic restraints; (3) bolt-on SS lifting lugs with titanium bolts; tank identification labels;
NFPA label; numerical gallon marker tape; PE stamped Barlow & Seismic Calculations and a
24 hour hydrostatic test. All fitting materials are PVC with EPDM Gaskets and Titanium Bolts
as recommended for Sodium Hypochlorite. See option below for the Viton GF gasket adder.
$15,470.00 Ea. $30,940.00 FOB Jobsite
Options:
• Use Viton GF gaskets for all of the fittings (and fume tight manway) instead of EPDM add
$2,600 per tank ($5,200 total). Note: Viton GF is more expensive than standard Viton and
Viton GF IS NSF 61 Certified and standard Viton is NOT. Poly Processing certifies the entire
tank system for NSF 61, while other manufacturers certify only the tank itself and not the
fittings, so they don’t mention that Viton is not NSF 61 certified.
• The fume tight manway quoted above uses Titanium bolts, a flat plate lid and ¼” thick gasket
to completely seal the manway. This type of manway is usually only used for fuming
chemicals like Hydrochloric Acid, Acetic Acid, etc. - almost never is this used for Sodium
Hypochlorite. Also, other manyfacturers just add a gasket to their threaded lid or lid with
plastic bolts and call it “fume tight”. An actual fume tight lid is very expensive. If you remove
the fume right lid for a standard lid with polyethylene gasket, you can deduct $850 per tank
($1,700 total). If you want to remove the fume tight manway and also select the Viton GF
gasket package- deduct the $850 per tank for the fume tight manway as well as an additional
$602 from each tank ($1,204 total) for the Viton GF package. Please note if you use the 24”
manway with gasket instead of the fume tight manway, we will use a polyethylene gasket for
the manway).
TANK EQUIPMENT, INC. ∙ 3752 Imperial Street, Unit F ∙ Frederick, CO 80516 ∙ 303-833-9200 ∙ Fax: 303-833-9205
Email: sales@tankequipment.com ∙ www.tankequipment.com
Page 2.
Objection/Clarifications to Section 43_41_46
2.02 B. Tank bottom is not sloped. The smallest Crosslinked Polyethylene IMFO tanks with a slope
available for Sodium Hypochlorite is a tank with a nominal capacity of 3950 gallons.
2.04 B. Magnetic Liquid Level Indicator to be provided by others.
Notes:
• The tank we quoted is Crosslinked Polyethylene with an OR-1000 inner surface. This is the
best tank material available to store Sodium Hypochlorite.
• Tank quoted are specially designed for Sodium Hypochlorite storage and include a full 5-year
warranty.
• Tanks do not have side manways since the (IMFO) outlet is at the bottom of the tank, full
drainage is achieved below the tank knuckle radius, which can eliminate the need to enter the tank
for cleaning.
• Tank Equipment will include a visit to the Jobsite by a qualified representative free of charge.
• Prices quoted are firm for 30 days.
• Lead-time is 4-5 weeks plus transit time after signed approval drawing. Approval Drawings
provided in 2-3 weeks from receipt of PO.
• All sales are subject to Tank Equipment Terms & Conditions W.A.C. which can be viewed on
our website at www.tankequipment.com. Some orders may be subject to a down payment
and/or progress payments.
Please let me know if I can answer any questions or be of further assistance.
Sincerely,
Calixto "Cali" Bello
Tank Equipment, Inc.
Office: (303) 962-7817
Direct: (303) 962-7817
Email: Cali@tankequipment.com