HomeMy WebLinkAboutCORRESPONDENCE - RFP - 9085 DIVE TEAM SERVICES FOR JOE WRIGHT RESERVOIR (2)Utilities Work Order Form Official Purchasing Form
Last updated 10/2017
WORK ORDER
PURSUANT TO A MASTER AGREEMENT BETWEEN
THE CITY OF FORT COLLINS
AND
MARINE DIVING SOLUTIONS, LLC.
WORK ORDER NUMBER:
PROJECT TITLE:
2 8-21-20209-2020
Joe Wright Reservoir Low Flow Gate Replacement
ORIGINAL BID/RFP NUMBER & NAME: 9085 Dive Team Services
MASTER AGREEMENT EFFECTIVE DATE: April 22, 2020
ARCHITECT/ENGINEER: HDR Engineering
OWNER’S REPRESENTATIVE: Mark Kempton
WORK ORDER COMMENCEMENT DATE: August 24, 2020
WORK ORDER COMPLETION DATE: October 31, 2020
MAXIMUM FEE: (time and reimbursable direct costs): $84,700.00
PROJECT DESCRIPTION/SCOPE OF SERVICES: See Scope of Work.
Service Provider agrees to perform the services identified above and on the attached forms in
accordance with the terms and conditions contained herein and in the Master Agreement between
the parties. In the event of a conflict between or ambiguity in the terms of the Master Agreement
and this Work Order (including the attached forms) the Master Agreement shall control.
The attached forms consisting of Eighteen (18) pages are hereby accepted and
incorporated herein, by this reference, and Notice to Proceed is hereby given after all
parties have signed this document.
SERVICE PROVIDER: Marine Diving Solutions, LLC
By: Date:
Name: Title:
DocuSign Envelope ID: EE6A0A6F-C56C-40FF-872A-CE1FE364DC8E
Ian Stephens Owner
8/21/2020
Utilities Work Order Form Official Purchasing Form
Last updated 10/2017
OWNER’S ACCEPTANCE & EXECUTION:
This Work Order and the attached Contract Documents are hereby accepted and incorporated
herein by this reference.
ACCEPTANCE: Date:
Amy Johnson, Project Manager
REVIEWED: Date:
Marisa Donegon, Buyer
ACCEPTANCE: Date:
Mark Kempton, Interim WR&T Deputy Director
ACCEPTANCE:
Gerry Paul, Purchasing Director
(if greater than $60,000)
Date:
DocuSign Envelope ID: EE6A0A6F-C56C-40FF-872A-CE1FE364DC8E
8/21/2020
8/21/2020
8/21/2020
8/21/2020
Utilities Work Order Form Official Purchasing Form
Last updated 10/2017
ATTACHMENT A
WORK ORDER SCOPE OF SERVICES
DocuSign Envelope ID: EE6A0A6F-C56C-40FF-872A-CE1FE364DC8E
Page 1 of 2
Mark Kempton, P.E., CWP
Interim Deputy Director Utilities
Water Resources & Treatment
City of Ft. Collins
Phone:
Cell:
Fax:
Email:
(970) 221-6692
(970) 286-9533
mkempton@fcgov.com
Scope of Work:
MDS has prepared this estimate for the City of Ft. Collins (City) following the
results of inspections made on August 11 and 12, 2020 at Joe Wright Dam and
Reservoir. This scope of work includes:
1. Remove and replace the failed 6-inch diameter low-flow gate, gate stem,
stem guides and operator.
2. Make adjustments to the downstream control gate stem, stem splices and
thrust nut where misalignment of stem sections and missing set keys were
observed.
The above work will require the use of a crane and man basket and it is assumed
that the City will dewater the downstream chamber of the Gate Tower for the
work to be performed in the dry during normal working hours.
MDS’s proposed, not to exceed price of $84,700 is based on the above
assumptions and is broken out as indicated on the attached spreadsheet. We
estimate that it will take up to 7 working days, plus 1 day for mobilization and
demobilization to complete the work. We have firm commitments for the
replacement 6-inch-gate and stem and stem guide manufacture to complete the
above work prior to October 1, 2020.
The proposal price listed above is good for 90 days unsigned and valid for 1 year upon
acceptance.
Payment Terms: 1% Ten Days, Net 30 Days. 2.5% interest per month on all accounts past 30 days.
Marine Diving Solutions will provide all personnel and equipment necessary to perform described
scope of work.
Work will be in compliance with AWWA, NACE, OSHA, ACI, AWS, and SSPC regulations.
MDS has a $1,000,000 liability and $2,000,000 aggregate insurance policy, $2,000,000, umbrella
and is fully bondable.
All dates are tentative till bid is signed and utility is put on schedule, dates may change with
given advance notice to utility.
21670 East Geddes Place
Centennial, Colorado 80016
Office Phone: 800-637-1322
Office Fax: 303-309-0097
don@marinedivingsolutions.com
DocuSign Envelope ID: EE6A0A6F-C56C-40FF-872A-CE1FE364DC8E
City of Ft. Collins
Replacement of 6-inch Low Flow Gate Proposal
Page 2 of 2
Proposal does not include Sales or Use Taxes, Registration fees, or City/Municipality licenses
unless noted in proposal above. If MDS is liable for any additional fees requested or required by
utility and not noted in proposal, the charges will be added to the invoice when billed.
If MDS must stop working due to unforeseen reasons (utility not on site to direct dive team,
utility request team to wait due to low water or water runoff, or etc.) a fee of $687.50 an hour
will be charged.
8/19/2020
Donald Lopez, P.E., Project Manager Dated
To accept, please sign and date this proposal. Please mail, fax, or email this signed contract to
the office.
__________________________________________ ___________________
Printed Name and Title Date
__________________________________________
Signature
DocuSign Envelope ID: EE6A0A6F-C56C-40FF-872A-CE1FE364DC8E
MODEL ET SERIES 20
Reserves the right to change specifications without notice
OBX 12/19
Rev.12
ET (SER.20)_1
ORBINOX CANADA, ORBINOX USA, ORBINOX BRAZIL, ORBINOX CHILE, ORBINOX PERU, ORBINOX SPAIN, ORBINOX UK, ORBINOX FRANCE, ORBINOX GERMANY, ORBINOX INDIA, ORBINOX CHINA, ORBINOX S.E.A.
www.orbinox.com
HEAVY DUTY KNIFE GATE VALVE
• Pulp and Paper
• Power plants
• Mining
• Chemical plants
• Wastewater treatment plants
• Food and Beverage
• Etc.
Sizes:
Working pressure:
Standard flange connection:
Directives:
2006/42/CE (MACHINES)
2014/68/EU (PED) Fluid: Group 1(b), 2 (Cat. I, mod. A)
2014/34/EU (ATEX)
Other flange connections available on request
STANDARD PARTS LIST
Part: Stainless Steel:
1- Body CF8M
2- Gate AISI 316
3- Seat Metal or EPDM
4- Packing PTFE Impreg. Synth. Fibre
with an EPDM O-Ring
5- Gland Follower CF8M
6- Stem Stainless Steel
7- Stem nut Brass
8- Yoke AISI 304 / Epoxy-coated Carbon Steel
9- Seat Retainer Ring AISI 316
10- Handwheel GJS400 (GGG40)
11- Cap Plastic
12- Stem Protector Epoxy-coated Carbon Steel
13- Friction Washer Brass
14- Nut Zinc Plated Carbon Steel
DN 2”/ 50mm to DN 24”/600mm
DN 30”/750mm
DN 36”/900mm
The ET(SER.20) model knife gate is an uni-directional lug type valve designed according to MSS-SP-81
and TAPPI TIS 405-8 for industrial service applications. The design of the body and seat assures non-
clogging shut off on suspended solids in industries such as:
DN 2”/50mm to DN 36”/900mm (larger diameters on request)
DIN PN 10 and ANSI B16.5 (class 150)
150 psi /(10 kg/cm²)
100 psi / (7 kg/cm²)
100 psi / (7 kg/cm²)
All valves are tested prior to shipping in accordance with the standard developed by the Quality Control Department at ORBINOX.
DocuSign Envelope ID: EE6A0A6F-C56C-40FF-872A-CE1FE364DC8E
MODEL ET SERIES 20
Reserves the right to change specifications without notice
OBX 12/19
Rev.12
ORBINOX CANADA, ORBINOX USA, ORBINOX BRAZIL, ORBINOX CHILE, ORBINOX PERU, ORBINOX SPAIN, ORBINOX UK, ORBINOX FRANCE, ORBINOX GERMANY, ORBINOX INDIA, ORBINOX CHINA, ORBINOX S.E.A. ET
(SER.20)_2
www.orbinox.com
DESIGN FEATURES
BODY:
Lug type one piece integrally cast stainless steel body with reinforced ribs in larger diameters for
extra body strength. Internal cast gate wedges and guides allows for tighter shutoff. Port design
follows the MSS-SP-81 and Tappi TIS 405-8 standards.
The internal design of the valve avoids any build up of solids that would prevent the valve from
closing.
GATE:
Standard AISI 316 stainless steel gate.
The gates are polished and lapped to attain a greater seal between the gate and both the
packing and the seat. The bottom of the gate edge is also machined to a bevel, so that it cuts
through the solids for a tighter seal in the closed position.
SEAT: (resilient)
Unique design that mechanically locks the seal in the internal of the valve body with a
stainless steel retainer ring. Standard EPDM also available in different materials such as
Viton, PTFE, etc.
PACKING:
Long-life packing with several layers of PTFE impregnated fibre plus an EPDM O-ring, with an
easy access packing gland ensuring a tight seal. Long-life braided packing is available in a
wide range of materials.
STEM:
ACTUATORS:
Made of stainless steel (EPOXY coated carbon steel available on request). Compact design makes it
extremely robust even under the most severe conditions.
All actuators supplied by ORBINOX are interchangeable, and supplied with a standard mounting
kit for installation purposes on site.
EPOXY COATING:
The epoxy coating on all ORBINOX cast iron and carbon steel valve bodies and components is
electrostatically applied making the valves to be corrosion resistant with a high quality finished
surface. The ORBINOX standard colour is RAL-5015 blue.
GATE SAFETY PROTECTION:
ORBINOX automated valves are provided with gate guards in accordance with EU Safety Standards.
The design feature prevents any objects from being caught accidentally while the gate is moving.
*ONLY IN EUROPE
YOKE or ACTUATOR SUPPORT:
The standard stainless steel stem offers a long corrosion resistant life. For rising stem actuators
only, a stem protector is provided for additional protection against dust while the valve in the
open position.
DocuSign Envelope ID: EE6A0A6F-C56C-40FF-872A-CE1FE364DC8E
MODEL ET SERIES 20
Reserves the right to change specifications without notice
OBX 12/19
Rev.12
ET (SER.20)_3
ORBINOX CANADA, ORBINOX USA, ORBINOX BRAZIL, ORBINOX CHILE, ORBINOX PERU, ORBINOX SPAIN, ORBINOX UK, ORBINOX FRANCE, ORBINOX GERMANY, ORBINOX INDIA, ORBINOX CHINA, ORBINOX S.E.A.
www.orbinox.com
Fig.1
Fig.2
OTHER OPTIONS
Bonnet (Fig.1):
Assures tight seal to atmosphere.
Reduces packing maintenance.
V-port:
60 degree and pentagonal port design. Selection depends on the desired fluid
control type.
Flush ports (Fig.2):
Allow for cleaning of solids trapped within the body cavities that can obstruct the
flow or prevent the valve from closing. Depending on the process, purging can be
made with air, steam, liquids, etc.
Other materials of construction:
Special alloys such as AISI 317 (1.4449), 254SMO (1.4544), Hastelloys, …
ORBINOX designs, produces and delivers special fabricated valves for special
process conditions (big sizes and/or high pressures).
Fabricated valves:
SURFACE TREATMENTS
Valve components can be protected or coated for a longer life expectancy,
depending on the application of the valves and the valve service conditions.
At ORBINOX we can offer alternative treatments and coatings for the different
valve components to improve their properties against abrasion (Stellite,
polyurethane…), against corrosion (Halar, Rilsan, galvanizing…) and against
adherence (polishing, PTFE…).
ATEX
We recommend to contact our technical department.
Please contact our ORBINOX representative for info and availability. Some
considerations:
• Hand operated ET(SER.20) valves have been subjected to an ignition risk
assessment according to DIN EN 13463: 1-5 and they are out the scope of
application of ATEX Directive. Therefore hand operated valves are suitable for
ALL ATEX zones.
• Electrical, pneumatical and hydraulically operated valves must be subjected
to a conformity assessment of their own and also of the whole unit valve-
actuator to get EC Type Approval to Directive 2014/34.
DocuSign Envelope ID: EE6A0A6F-C56C-40FF-872A-CE1FE364DC8E
MODEL ET SERIES 20
Reserves the right to change specifications without notice
OBX 12/19
Rev.12
ET (SER.20)_4
ORBINOX CANADA, ORBINOX USA, ORBINOX BRAZIL, ORBINOX CHILE, ORBINOX PERU, ORBINOX SPAIN, ORBINOX UK, ORBINOX FRANCE, ORBINOX GERMANY, ORBINOX INDIA, ORBINOX CHINA, ORBINOX S.E.A.
www.orbinox.com
ACTUATOR TYPES
MANUAL:
Handwheel (rising stem)
Handwheel (non-rising stem)
Chainwheel
Lever
Bevel Gear
Other (square nut)
AUTOMATIC:
Electric (rising & non-rising stem)
Pneumatic (single & double-acting)
Hydraulic
All actuators supplied by ORBINOX are interchangeable.
Used on pneumatic actuated valves
SINGLE ACTING (SPRING RETURN)
• Available from
DN 2"/50mm to DN 12"/300mm
• Supply pressure:
- min. 75 psi/ (5 kg/cm² )
- max. 150 psi/ (10 kg/cm²)
• Options:
- Pneumatic or electric fail open
- Pneumatic or electric fail close
- Other options on request
DOUBLE ACTING WITH AIR TANK
• Available for all valve sizes
• Supply pressure:
- min. 50 psi / (3.5 kg/cm²)
- max. 150 psi / (10 kg/cm²)
• Options:
- Pneumatic or electric fail open
- Pneumatic or electric fail close
- Other options on request
For further information about fail safe systems and valve extensions, please see EX(SER.10) catalog.
We recommend to contact with our technical department.
FAIL SAFE SYSTEMS ACCESSORIES
Wide range of valve extensions available
Mechanical stops
Locking device
Manual override
Solenoid valves
Positioners
Limit switches
Proximity switches
Floor stands
Stem extensions
DocuSign Envelope ID: EE6A0A6F-C56C-40FF-872A-CE1FE364DC8E
MODEL ET SERIES 20
Reserves the right to change specifications without notice
OBX 12/19
Rev.12
ET (SER.20)_5
ORBINOX CANADA, ORBINOX USA, ORBINOX BRAZIL, ORBINOX CHILE, ORBINOX PERU, ORBINOX SPAIN, ORBINOX UK, ORBINOX FRANCE, ORBINOX GERMANY, ORBINOX INDIA, ORBINOX CHINA, ORBINOX S.E.A.
www.orbinox.com
>482 >250
248 120
248 120
392
200
482 250
482 250
pH
122 50 6-8
464 240 2-13
500 260 0-14
1112 600 0-14
2192 1200 --
TEMPERATURE CHART
SEAT / SEALS PACKING
More details and other materials under request
NOTE: all types include an elastomere O-ring (same material as
seal), excluding TH, GR and FC.
Material Max.T.(Fº) (ºC) Applications Material Max.T. (Fº) (ºC)
Dry cotton (AS)
PTFE impregn. synth. fibre (ST)
Braided PTFE (TH)
Graphited (GR)
Ceramic fibre (FC)
Metal/Metal
EPDM (E)
Nitrile (N)
Viton (V)
Silicone (S)
PTFE (T)
High temp. Low tightness.
Acids and non mineral oils.
Resistance to petroleum products.
Chemical service./High temp.
Food service. / High temp.
Corrosion resistance.
SEAT TYPES
METAL / METAL
For applications with:
• High temperature
• High density media application
• When full tightness is not required
RESILIENT, TYPE "A"
• Standard resilient seat.
• Temperature limitations according to seat material
selected. Review the above chart or contact our
technical department for more information.
• Replaceable seat retainer ring.
RESILIENT, TYPE "B"
• Temperature limitations according to
the selected seat material. Review the
above chart or contact our Technical
Department for more information.
MODEL ET SERIES 20
Reserves the right to change specifications without notice
OBX 12/19
Rev.12
ET (SER.20)_6
ORBINOX CANADA, ORBINOX USA, ORBINOX BRAZIL, ORBINOX CHILE, ORBINOX PERU, ORBINOX SPAIN, ORBINOX UK, ORBINOX FRANCE, ORBINOX GERMANY, ORBINOX INDIA, ORBINOX CHINA, ORBINOX S.E.A.
www.orbinox.com
DN(“/mm)
m
N A B C D E F ØG H
2”/50 1,96/50 1,89/48 4,88/124 4/100 3,85/98 5,35/139 1,85/47 8,86/225 16,53/420 18/8
3”/80 3,14/80 2/51 5,87/149 4/100 4,68/119 6,38/162 1,85/47 8,86/225 18,50/470 22/10
4”/100 3,81/97 2/51 6,65/169 4/100 5,47/139 7,36/187 1,85/47 8,86/225 20,43/519 28/12,5
5”/125 4,6/117 2,24/57 6,65/169 4/100 5,90/150 8,78/223 1,85/47 8,86/225 24,13/613 35/16
6”/150 5,51/140 2,24/57 7,75/197 4/100 6,50/165 9,33/237 1,85/47 8,86/225 25,27/642 44/20
8”/200 7,24/184 2,75/70 9,72/247 4,80/122 7,99/203 12,16/309 2,64/67 12,20/310 32,28/820 70/32
10”/250 9,05/230 2,75/70 11,73/298 4,80/122 9,17/233 13,58/345 2,64/67 12,20/310 38,81/986 103/47
12”/300 10,82/275 2,99/76 13,74/349 4,80/122 10,74/273 15,35/390 2,72/69 16,14/410 42,16/1071 143/65
14”/350 12/305 2,99/76 15,39/391 7,60/193 12,28/312 17,04/433 2,60/66 16,14/410 49,01/1245 209/95
16”/400 13,84/351,6 3,50/89 17,28/439 7,60/193 13,66/347 18,81/478 2,60/66 16,14/410 52,16/1325 268/122
18”/450 15,35/390 3,50/89 19,01/483 7,75/197 16,33/415 21,73/552 2,64/67 21,65/550 59,49/1510 352/160
20”/500 17,12/435 4,49/114 21,33/542 7,75/197 17,71/450 24,05/611 2,64/67 21,65/550 63,66/1617 444/202
24”/600 20,55/522 4,49/114 25,08/637 7,75/197 19,72/501 27,44/697 2,64/67 21,65/550 74,13/1883 638/290
Weight (lbs/kg.)
HANDWHEEL (rising stem)
• Standard handwheel actuator.
• Consists of:
- Handwheel: Epoxy coated Cast Iron
- Yoke
- Stem
- Stem nut
- Stem protector
• Available from DN 2”/50mm to DN 24”/600mm
• Options (on request):
- Chainwheel
- Non-rising stem
- Locking Device
- Extensions
DocuSign Envelope ID: EE6A0A6F-C56C-40FF-872A-CE1FE364DC8E
MODEL ET SERIES 20
Reserves the right to change specifications without notice
OBX 12/19
Rev.12
ET (SER.20)_7
ORBINOX CANADA, ORBINOX USA, ORBINOX BRAZIL, ORBINOX CHILE, ORBINOX PERU, ORBINOX SPAIN, ORBINOX UK, ORBINOX FRANCE, ORBINOX GERMANY, ORBINOX INDIA, ORBINOX CHINA, ORBINOX S.E.A.
www.orbinox.com
DN(“/mm) N A B C D E F ØG H I
8”/200 7,24/184 2,75/70 9,72/247 4,80/122 7,99/203 12,16/309 22,91/582 12/300 39,05/992 7,87/200
10”/250 9,05/230 2,75/70 11,73/298 4,80/122 9,17/233 13,58/345 25,51/648 12/300 41,73/1060 7,87/200
12”/300 10,82/275 2,99/76 13,74/349 4,80/122 10,74/273 15,35/390 28,85/733 12/300 45/1143 7,87/200
14”/350 12/305 2,99/76 15,39/391 7,75/197 12,28/312 16,93/430 31,10/790 18/450 58,62/1489 10,63/270
16”/400 13,84/351,6 3,50/89 17,28/439 7,75/197 13,66/347 18,70/475 34,25/870 18/450 61,81/1570 10,63/270
18”/450 15,35/390 3,50/89 19,01/483 7,91/201 16,33/415 20,39/518 38,74/984 18/450 63,58/1615 10,63/270
20”/500 17,12/435 4,49/114 21,33/542 7,91/201 17,71/450 21,97/558 42,99/1092 18/450 71,25/1810 11,02/280
24”/600 20,55/522 4,49/114 25,08/637 7,91/201 19,72/501 26,10/663 49,13/1248 26/650 73,98/1879 11,41/290
30”/750 26,37/670 4,60/117 33,15/842 12,60/320 24,57/624 34,29/871 62,87/1597 26/650 104,33/2650 16,26/413
36”/900 31,88/810 4,60/117 38,19/970 12,60/320 30,67/779 41,18/1046 84,05/2135 26/650 123,42/3135 17,40/442
GEAR
• Recommended for valves larger than DN14”/350mm and
working pressures greater than 50 psi/(3.5 kg/cm²)
• Consists of:
- Stem
- Yoke
- Bevel Gear Actuator with Handwheel
(Standard Ratio 4:1)
• Available from DN 8”/200mm to DN 36”/900mm
• Options:
- Chainwheel
- Non-rising Stem
- Locking Device
- Extensions
DocuSign Envelope ID: EE6A0A6F-C56C-40FF-872A-CE1FE364DC8E
MODEL ET SERIES 20
Reserves the right to change specifications without notice
OBX 12/19
Rev.12
ET (SER.20)_8
ORBINOX CANADA, ORBINOX USA, ORBINOX BRAZIL, ORBINOX CHILE, ORBINOX PERU, ORBINOX SPAIN, ORBINOX UK, ORBINOX FRANCE, ORBINOX GERMANY, ORBINOX INDIA, ORBINOX CHINA, ORBINOX S.E.A.
www.orbinox.com
PNEUMATIC CYLINDER
• The standard pneumatic actuator (double acting on-off cylinder) consists of:
- Ø ≤ 12"/300mm: Aluminum barrels
- Ø ≥ 14"/350mm: Composite barrels
- Aluminum end covers
- Stainless Steel (AISI 304) piston rod
- Nitrile coated steel piston
• Available from DN 2”/50mm to DN 36”/900mm
• Supply Pressure: min. 50 psi/(3.5 kg/cm²) - max. 145 psi/(10 kg/cm²)
Actuator designed with 85psi/(6 kg/cm²) air supply
• For valves installed in a horizontal position, we recommend U-type support plates
and/or actuator support.
• Options:
- Hard anodized barrel and covers
- Stainless Steel barrel and covers
- Over / Undersized cylinder
- Manual override
- Fail safe systems
- Travel stops
• Instrumentation (on request):
- Positioners
- Flow regulators
- Solenoid valves
- Air preparation units
DN(“/mm) N A B C D E F G H
2”/50 1,96/50 1,89/48 4,88/124 4/100 3,85/98 5,35/139 7,00/178 4,53/115 16,22/412 22/10 C4”-2.44”/(100-62) ¼” G
3”/80 3,14/80 2/51 5,87/149 4/100 4,68/119 6,38/162 8,30/211 4,53/115 19,37/492 26/12 C4”-3.74”/(100-95) ¼” G
4”/100 3,81/97 2/51 6,65/169 4/100 5,47/139 7,36/187 9,09/231 4,53/115 21,93/557 33/15 C4”-4.52”/(100-115) ¼” G
5”/125 4,6/117 2,24/57 6,65/169 4/100 5,90/150 8,78/223 10,66/271 5,51/140 25,35/644 46/21 C5”-5.52”/(125-143) ¼” G
6”/150 5,51/140 2,24/57 7,75/197 4/100 6,50/165 9,33/237 11,65/296 5,51/140 27,48/698 59/27 C5”-6.61”/(125-168) ¼” G
8”/200 7,24/184 2,75/70 9,72/247 4,80/122 7,99/203 12,16/309 14,09/358 6,89/175 34,25/870 101/46 C6.30”-8.66”/(160-220) ¼” G
10”/250 9,05/230 2,75/70 11,73/298 4,80/122 9,17/233 13,58/345 16,85/428 8,66/220 39,60/1006 154/70 C8”-10.62”/(200-270) 3/8” G
12”/300 10,82/275 2,99/76 13,74/349 4,80/122 10,74/273 15,35/390 18,81/478 8,66/220 44,93/1141 195/89 C8”-12.60”/(200-320) 3/8” G
14”/350 12/305 2,99/76 15,39/391 7,60/193 12,28/312 18,07/459 21,61/549 10,90/277 51,96/1320 297/135 C10”-14.76”/(250-375) 3/8” G
16”/400 13,84/351,6 3,50/89 17,28/439 7,60/193 13,66/347 18,81/478 23,58/599 10,90/277 56,06/1424 356/162 C10”-16.78”/(250-425) 3/8” G
18”/450 15,35/390 3,50/89 19,01/483 7,75/197 16,33/415 21,73/552 26,77/680 15,03/382 64,84/1647 466/212 C12”-18.70”/(300-475) ½” G
20”/500 17,12/435 4,49/114 21,33/542 7,75/197 17,71/450 24,05/611 28,74/730 15,03/382 70,51/1791 638/290 C12”-20.67”/(300-525) ½” G
24”/600 20,55/522 4,49/114 25,08/637 7,75/197 19,72/501 27,44/697 32,68/830 15,03/382 79,84/2028 825/375 C12”-24.60”/(300-625) ½” G
30”/750 26,37/670 4,60/117 33,15/842 12,60/320 24,57/624 37,00/940 38,77/985 17,48/444 100,35/2549 1419/645 C14”-30.70”/(350-780) ¾” G
36”/900 31,88/810 4,60/117 38,19/970 12,60/320 30,51/775 43,30/1100 47,32/1202 20,27/515 121,14/3077 1716/780 C16”-36.61”/(400-930) ¾” G
Weight (lbs./kg.) Standard Cyl. Connect.
DocuSign Envelope ID: EE6A0A6F-C56C-40FF-872A-CE1FE364DC8E
MODEL ET SERIES 20
Reserves the right to change specifications without notice
OBX 12/19
Rev.12
ET (SER.20)_9
ORBINOX CANADA, ORBINOX USA, ORBINOX BRAZIL, ORBINOX CHILE, ORBINOX PERU, ORBINOX SPAIN, ORBINOX UK, ORBINOX FRANCE, ORBINOX GERMANY, ORBINOX INDIA, ORBINOX CHINA, ORBINOX S.E.A.
www.orbinox.com
ELECTRIC ACTUATOR
• Consists of:
- Electric actuator
- Rising stem
- Motor support yoke flange
acc. to ISO 5210 / DIN 3338
• The standard electric motor is equiped with:
- Manual emergency operation
- Limit switches (open/closed)
- Torque switches
• Available from DN 2"/50mm to DN 48"/1200mm
• Wide range of types and marks available to meet
customer's needs.
• Option:
- Non rising stem
DN(“/mm) N A B C D E F ØG H I J L M
2”/50 1,96/50 1,89/48 4,88/124 4/100 3,86/98 5,35/136 14,84/377 6,30/160 17,87/454 10,43/265 9,80/249 2,44/62 9,37/238 0.79 x 0.16/20 x 4 7.4/10
3”/80 3,14/80 2/51 5,87/149 4/100 4,68/119 6,38/162 16,69/424 6,30/160 19,72/501 10,43/265 9,80/249 2,44/62 9,37/238 0.79 x 0.16/20 x 4 7.4/10
4”/100 3,81/97 2/51 6,65/169 4/100 5,47/139 7,36/187 18,46/469 6,30/160 21,49/546 10,43/265 9,80/249 2,44/62 9,37/238 0.79 x 0.16/20 x 4 7.4/10
5”/125 4,6/117 2,24/57 6,65/169 4/100 5,90/150 8,78/223 20,31/516 6,30/160 23,34/593 10,43/265 9,80/249 2,44/62 9,37/238 0.79 x 0.16/20 x 4 11.1/15
6”/150 5,51/140 2,24/57 7,75/197 4/100 6,50/165 9,33/237 21,45/545 6,30/160 44,17/1122 10,43/265 9,80/249 2,44/62 9,37/238 0.79 x 0.16/20 x 4 14.8/20
8”/200 7,24/184 2,75/70 9,72/247 4,80/122 7,99/203 12,16/309 26,25/667 6,30/160 49,40/1255 10,43/265 9,80/249 2,44/62 9,37/238 0.98 x 0.2/25 x 5 22.2/30
10”/250 9,05/230 2,75/70 11,73/298 4,80/122 9,17/233 13,58/345 28,85/733 6,30/160 52,00/1321 10,43/265 9,80/249 2,44/62 9,37/238 0.98 x 0.2/25 x 5 33.3/45
12”/300 10,82/275 2,99/76 13,74/349 4,80/122 10,74/273 15,35/390 31,22/793 7,87/200 54,37/1381 11,14/283 10/254 2,55/65 9,76/248 0.98 x 0.2/25 x 5 51.8/70
14”/350 12/305 2,99/76 15,39/391 7,60/193 12,28/312 17,04/433 34,44/875 7,87/200 57,59/1463 11,14/283 10/254 2,55/65 9,76/248 1.38 x 0.24/35 x 6 81.4/110
16”/400 13,84/351,6 3,50/89 17,28/439 7,60/193 13,66/347 18,81/478 37,60/955 12,40/315 60,75/1543 15,31/389 13,22/336 3,58/91 11,25/286 1.38 x 0.24/35 x 6 118.4/160
18”/450 15,35/390 3,50/89 19,01/483 7,75/197 16,33/415 21,73/552 44,96/1142 12,40/315 73,63/1870 15,31/389 13,22/336 3,58/91 11,25/286 1.38 x 0.24/35 x 6 140.6/190
20”/500 17,12/435 4,49/114 21,33/542 7,75/197 17,71/450 24,05/611 48,11/1222 15,74/400 76,77/1950 15,31/389 13,34/339 3,58/91 11,25/286 1.38 x 0.24/35 x 6 199.8/270
24”/600 20,55/522 4,49/114 25,08/637 7,75/197 19,72/501 27,44/697 56,85/1444 15,74/400 85,51/2172 15,31/389 13,34/339 3,58/91 11,25/286 1.57 x 0.27/40 x 7 333/450
30”/750 26,37/670 4,60/117 33,15/842 12,60/320 24,57/624 34,76/883 70,03/1779 19,68/500 111,49/2832 16,92/430 14,37/365 4,61/117 11,93/303 1.97 x 0.31/50 x 8 407/550
36”/900 31,88/810 4,60/117 38,19/970 12,60/320 30,67/779 41,18/1046 80,11/2035 19,68/500 121,26/3080 16,92/430 14,37/365 4,61/117 11,93/303 2.36 x 0.35/60 x 9 627/850
Stem Ø x pich Torque
(ft.LBS/Nm)
DocuSign Envelope ID: EE6A0A6F-C56C-40FF-872A-CE1FE364DC8E
MODEL ET SERIES 20
Reserves the right to change specifications without notice
OBX 12/19
Rev.12
ORBINOX CANADA, ORBINOX USA, ORBINOX BRAZIL, ORBINOX CHILE, ORBINOX PERU, ORBINOX SPAIN, ORBINOX UK, ORBINOX FRANCE, ORBINOX GERMANY, ORBINOX INDIA, ORBINOX CHINA, ORBINOX S.E.A. ET
(SER.20)_10
www.orbinox.com
FLANGE AND BOLTING DETAILS
DN K nº M T
50 125 4 M-16 11 2 - 2
80 160 8 M-16 9 2 - 6
100 180 8 M-16 9 2 - 6
125 210 8 M-16 10 2 - 6
150 240 8 M-20 10 2 - 6
200 295 8 M-20 12 2 - 6
250 350 12 M-20 12 4 - 8
300 400 12 M-20 12 4 - 8
350 460 16 M-20 15 6 - 10
400 515 16 M-24 15 6 - 12
450 565 20 M-24 15 6 - 14
500 620 20 M-24 22 6 - 14
600 725 20 M-27 22 6 - 14
900 1050 28 M-30 32 10 - 18
EN 1092-2 PN10
ANSI B16.5 / B16.47, class 150
DN K nº M T
2” 4 ¾” 4 5/8” - 11 UNC 7/16” 2 - 2
3” 6” 4 5/8” - 11 UNC 11/32” 2 - 2
4” 7 ½” 8 5/8” - 11 UNC 11/32” 2 - 6
5” 8 ½” 8 3/4” - 10 UNC 3/8” 2 - 6
6” 9 ½” 8 3/4” - 10 UNC 3/8” 2 - 6
8” 11 ¾” 8 3/4” - 10 UNC 15/32” 2 - 6
10” 14 ¼” 12 7/8” - 9 UNC 15/32” 4 - 8
12” 17” 12 7/8” - 9 UNC 15/32” 4 - 8
14” 18 ¾” 12 1” - 8 UNC 19/32” 4 - 8
16” 21 ¼” 16 1” - 8 UNC 19/32” 4 - 12
18” 22 ¾” 16 1 1/8” - 7 UNC 19/32” 6 - 10
20” 25” 20 1 1/8” - 7 UNC 7/8” 6 - 14
24” 29 ½” 20 1 1/4” - 7 UNC 7/8” 6 - 14
30” 36” 28 1 1/4” - 7 UNC 1 1/4” 10 - 18
36” 42 ¾” 32 1 1/2” - 6 UNC 1 1/4” 10 - 22
BLIND TAPPED HOLES
TAPPED THROUGH
DocuSign Envelope ID: EE6A0A6F-C56C-40FF-872A-CE1FE364DC8E
PRODUCT WARRANTY
ORBINOX warrants its products for one year from the date of shipment
against defects in material and workmanship if the products are used for
the purpose for which they were manufactured and sold. Prompt written
notice of defects is required. ORBINOX shall not be liable for defects in
workmanship of any product supplied by it, in the event such defects may
be the result of work or rework on the equipment by any person other than
an authorized ORBINOX representative. The purchaser’s exclusive right or
remedy under this warranty shall be limited to the furnishing or
replacements for products found defective by ORBINOX. The purchaser
shall have no claims in contract or in negligence for any labour,
consequential damages, including loss or profits, down-time, or any other
loss, damage, or expense of any kind arising out of the defect.
This warranty is in lieu of all other warranties, written or oral or statutory
expressed or implied. Including the warranties of merchantability or fitness
for a particular purpose, all of which are herby excluded.
DocuSign Envelope ID: EE6A0A6F-C56C-40FF-872A-CE1FE364DC8E
ATTACHMENT B
WORK ORDER COST DETAIL
DocuSign Envelope ID: EE6A0A6F-C56C-40FF-872A-CE1FE364DC8E
City of Ft. Collins
Joe Wright Reservoir
6-Inch Gate Replacement Cost Proposal
Item Qty Cost Unit Total Comments
Mobilization & Demobilization 1 $ 5,000 LS $ 5,000
Labor 7 $ 5,500 Days $ 38,500 4 man crew, 8 hour days per original work order
Replacement Valve, Stem, Stem Guides and Operator 1 $ 24,200 LS $ 24,200 New valve, stem, stem guides and operator
Miscellaneous Hardware, Equipment and Tools 1 $ 2,000 LS $ 2,000 Hilti, all thread, grinders, mounting hardware
Crane Mobilization & Demobilzation 1 $ 7,000 LS $ 7,000 Crane and Man Basket Work in Gate Tower
Crane Rental (weekly rate) 2 $ 4,000 WK $ 8,000
Estimate $ 84,700
Print Date: 8/19/2020 Marine Diving Solutions, LLC
DocuSign Envelope ID: EE6A0A6F-C56C-40FF-872A-CE1FE364DC8E
• Replaceable and reinforced seat ring
available in different materials such as:
AISI 316 (1.4401), CA15, Ni Hard,
etc.
DEFLECTION CONE "C"
• Deflects the media away from any valve internal
exposed parts (gate, seat,...)
• Material: AISI 316 (1.4401), CA15, Ni-Hard, PU,
etc.
• Face-to-face dimension increases:
DN 2"/50mm to DN 10"250mm X = 0.35”/9mm
DN 12"/300mm to DN 24"/600mm X = 0.47”/12mm
Larger diameters on request
DocuSign Envelope ID: EE6A0A6F-C56C-40FF-872A-CE1FE364DC8E