Loading...
HomeMy WebLinkAboutRFP - 7666 BOBCAT RIDGE HISTORIC BUILDINGS REHABILITATIONAddendum 1 – 7666 Bobcat Ridge Historic Buildings Rehabilitation Page 1 of 2 ADDENDUM NO. 1 SPECIFICATIONS AND CONTRACT DOCUMENTS Description of BID 7666: Bobcat Ridge Historic Buildings Rehabilitation OPENING DATE: 3:00 PM (Our Clock) July 17, 2014 To all prospective bidders under the specifications and contract documents described above, the following changes/additions are hereby made and detailed in the following sections of this addendum: Exhibit 1 – Questions & Answers Please contact John Stephen, CPPO, LEED AP, Senior Buyer at (970) 221-6777 with any questions regarding this addendum. RECEIPT OF THIS ADDENDUM MUST BE ACKNOWLEDGED BY A WRITTEN STATEMENT ENCLOSED WITH THE BID/QUOTE STATING THAT THIS ADDENDUM HAS BEEN RECEIVED. Financial Services Purchasing Division 215 N. Mason St. 2nd Floor PO Box 580 Fort Collins, CO 80522 970.221.6775 970.221.6707 fcgov.com/purchasing Addendum 1 – 7666 Bobcat Ridge Historic Buildings Rehabilitation Page 2 of 2 EXHIBIT 1 – QUESTIONS & ANSWERS 1. What is the scope for concrete floor repairs? Repair concrete per the RFP. Provide a square foot cost for any additional concrete repair that the City/State deems as necessary. $_____________/s.f. 2. To what level of structural repair would the City like to see the building rehabbed to? To its original specifications, or to today’s codes? To its original specifications. 3. Since the bid is given before the discovery phase, how would the City like to handle unknown building conditions that arise during construction? Through a change order. 4. Is power to be made operable, in either building, as part of this proposal? No. 5. The City's contract language lists a requirement for $5,000,000 Professional Liability E & O coverage (page 12, paragraph 5.04 B.2.) Does this requirement apply to the design/engineering team or to the design/build contractor, or both? As I recall the $5M Professional Liability E&O coverage was not required in Bobcat Phase The Professional Liability Errors and Omissions requirement is decreased from $5,000,000 to $1,000,000. This will be required from the design/engineering professional.