HomeMy WebLinkAboutRESPONSE - BID - 5873 USED 50 INCH BY 48 IN CRUSHER (3)BID PROPOSAL
BID #5873
BID OPENING: August 12, 2004, 2:30pm (our clock)
We hereby enter our bid for the City of Fort Collins' requirements for a Used Crusher, per the
bid invitation and any referenced specifications:
Specifications:
The following describes a Cedarapids 5048 Horizontal Shaft Impact Crusher. Bid units must
meet or exceed these specifications.
Single Rotor, 50" x 48" Horizontal Shaft
5' x 16', three deck screen
25" x 48" feed opening
60" x 16' side delivery conveyor (25hp electric motor)
48" x 20' under crusher conveyor (25hp electric motor)
250hp electric motor for crusher power
3-axle trailer carrier with air brakes
Capacities:
%" to 7/8" material: 400-450 ton/hour when used as secondary crusher with 5" feed size.
-2" material: 200+ ton/hour when used as primary crusher with 14" - 16" maximum feed size.
Submittals: Bidder must include detailed specifications for bid unit, including pictures.
Qty.
Description:
Extension
1
50" x 48" Horizontal Single Shaft Impact
Crusher
$ � I
'"f
L 17 0 - DD
J lJ
Evaluation of bid unit:
Bid will be awarded to lowest bid price unit judged to be acceptable by City staff. Bid unit must
be available for inspection prior to award. Bidder will not be responsible for City staff travel
expenses related to such inspection. Staff will evaluate the carrier and mountings, screens,
conveyors, power units, hydraulic system, controls and the overall condition of the machine.
Delivery:
Delivery will be mad within days after receipt of order.
Delivery cost: $ 1 M ISD FOB Destination: Fort Collins, CO
For questions concerning this bid, contact Jim Hume, Buyer, 970-221-6776.
Signature:
Title:
Company: PO,%MAC1iUkrRk?+&UV li. S
Date:
Street: 5C33 W Alli-i 13
Phone #: 9 S2— F9 5-9595
city: SNgOC
S
Fax#: g5z_- €9s-9564
State/Zip: Nk,3
Email: f
Road Machinery & Supplies Company
5633 West Hwy 13
Savage. Mn 55378
August 6, 2004
In reply to: Bid # 5873 Used 50"x48" Crusher
City of Fort Collins CO.
Dear City of Fort Collins CO.,
We respectfully submit the following proposal. We have a 1992 Cedar Rapids 5048 crusher. This unit does
not meet all of the criteria set forth in your bid, they are as follows: 3.3 Being a used unit no 45 day permit
is offered, the unit is sold as is and would be yours upon delivery. 3.4: Full payment would be due upon
delivery. 4.0: We offer no warranty on this machine. 4.1: we offer no warranty on this machine. We must
also make clear that this machine is subject to prior sale up until award of bid. If you wish to further inspect
this machine it is located at our corporate headquarter in Savage MN. We appreciate the opportunity to bid
and we hope to be of service to the City of Fort Collins.
Respectfully,
Brian Durfee
Used Equipment Manager
Road Machinery & Supplies Co.
BD
Equipment Detail for RMS # 807018
Page 1 of 2
1992 CEDARAPIDS 5048 Horizontal Shaft
Impact
Contact Paul Marxen
for Location & Availability
Features
• Single Rotor 50 X 48 Horizontal
Shaft
• 5 X 16, 3 Deck Screen
• Approx. 3/4" to 7/8" Material
400-450+ Ton Processed/Hr. as
Secondary Crusher (5"- Feed
Size)
• Approx. 2"- Material @ 150-250+
Ton Processed/Hr. as Primary
Crusher(14'-16"-Max. Feed
Size)
• 25" X 48" Feed Opening
• 60" X 16' Side Delivery Conveyor
Conditions
$149,500.00
Email: pmarxen(&rmsnt.com
Phone: (800) 888-9515
Fax: (952) 895 9564
More Photos
• 48" X 20' Conveyor Under
Crusher
• 250 HP. Reliance Electric Motor
• Conveyors Run Off 25 HP.
Electric Motors
• Needs Approx. 245 kW Genset
(Not Included)
• Triple Axle Carrier With 11 X 20
Tires & Air Brakes"
General
Appearance: Excellent Overall Condition: Very Good
Conveyor System: Very Good Sheet Metal: Very Good
Frame: Very Good
Hydraulic System
Hoses: Very Good
Power Train
Electrical System: Very Good
Tines
Tires Rear: Very Good
Notes
Rotor is in good co►kf&n. Previous owner had new bars put on rotor liners. Shaft
http://www.rmsequipment.comlEquipmentDetail.cf n?Equipment_ID=61&TypeTitle=Crush... 8/6/2004
Equipment Detail for RMS # 807018
Page 2 of 2
& bearings are in good condition. Hydraulics and grates are good. Drive belts
look good. All electric motors are operating well. Springs on shaker look okay.
Vibrating unit looks good (no leaks). Frame on screen has minimal cracks.
http://www. rmsequipment. com/EquipmentDetail. cfm?Equipment_ID=61 &TypeTitle=Crush... 8/6/2004