HomeMy WebLinkAboutAddenda - BID - 5815 OLD TOWN SQUARE RESTROOMSCity of Fort Collins
Administrative Services
Purchasing Division
CITY OF FORT COLLINS
ADDENDUM No. 2
BID #5815
OLD TOWN SQUARE RESTROOMS
SPECIFICATIONS AND CONTRACT DOCUMENTS
Description of Bid #5815 Old Town Square Restrooms
OPENING DATE: The Bid Opening Date has been changed to October 27, 2003,
3:00p.m. (Our Clock).
To all prospective bidders under the specifications and contract documents described
above, the following changes are hereby made.
BID OPENING IS DELAYED TO OCT 27, 2003, 3:00p.m. (Our Clock)
1. The DDA has requested that the exterior wood panels be removed and
replaced with similar wood, and painted.
2. Rusted hollow metal frames are to be repaired and repainted.
3. Metal store front and trusses are to be repainted.
4. The electrical panel will need to be relocated to the exterior storage area.
5. A concern was raised about the 6" plumbing wall being too narrow to
accommodate the toilets specified. A revised floor mounted toilet
specification is now noted on the drawings.
6. The brick and stone has been specified on the revised drawings.
7. The tile in the information desk area will be selectively patched, but in the
bathrooms, the floor tile will be Daltile "Pietre Vecchie" 12"xl2" on the
floors and Daltile Matte Fawn #736 6"x6" on the walls and ceiling.
8. The existing 3/4" water line serving the building will have to be upgraded
to a 1" line.
9. Toilet partition specifications are attached.
A new set of bid plans (drawings) will be mailed to all plan holders to
replace the original plans. The date on the new plans is 10/13/2003.
If you have any questions please contact John Stephen, CPPO, Senior Buyer, at 970-
221-6777.
RECEIPT OF THIS ADDENDUM MUST BE ACKNOWLEDGED BY A WRITTEN
STATEMENT ENCLOSED WITH THE BID/QUOTE STATING THAT THIS ADDENDUM
HAS BEEN RECEIVED.
215 North Mason Street • 2nd Floor • P.O. Box 580 • Fort Collins, CO 80522-0580 • (970) 221-6775 • FAX (970) 221-6707
10/14/2003 12:42 9704167435 M TORGERSON ARCH PAGE 03
http://www.arneraproducts. com/commercc//Assets/tp_spec_shects✓siec1. h t,
SPECIFICATIONS
STAINLESS STEEL PARTITIONS
with Floor Anchored Overhead Braced Mounting Style
PART 1: GENERAL
1.01 Work Included - The toilet partitions shall be stainless steel with floor
anchored overhead braced installation as distributed by AmeraProducts, Inc. cQ
800-608-6568 or
W W W.TOI LETSTALLS.COM.
1.02 Related Work - Furnish labor and materials necessary for completion of
work in this section as shown in approved drawings.
PART 2: PRODUCT
2.01 Doors, Panels and Urinal Screens - Shall be 1" thick and fabricated from
tension -leveled, 22 gauge type 304 stainless steel with #4 finish.
2.02 Pilasters - Shall be 1-1/4" thick and fabricated from tension -leveled 20
gauge type 304 stainless steel with #4 finish.
2.03 Material - Doors, panels, pilasters and urinal screens shall be manufactured
with a resin impregnated honeycomb core that is bonded under pressure to the
stainless steel with a non-toxlc adhesive to ensure solid construction and sound
attenuation. All stainless steel components shall be assembled with a special
interlocking, 20-gauge stainless steel molding welded and ground smooth at the
corners.
2.04 Finish - All components shall be stainless steel with a #4 satin finish and
include a PVC film for protection during shipment and installation.
2.05 Door Hardware - Shall be a "stay -level" non rising cam action hinge that
permit door to remain at desired position when not in use. Hinges, one-piece
strike and keeper, and coat hook shall be attached with tamper resistant barrel
nuts and shoulder screws. Concealed latch assembly shall allow for emergency
access. Doors for handicapped compartments shall be supplied with ADA
paddle handle.
2.06 Mounting Hardware - Chrome plated Zamac stirrup brackets shall be used
to mount panels and pilasters. Pilaster trim shoes shall be 304 stainless steel
with #4 satin finish. Mounting hardware shall be secured with tamper resistant
sheet metal screws.
2.07 Construction Design - Compartments shall be floor anchored with angle
bracket mounting system. Integral leveling bolt provides proper height
adjustment. Floor anchoring system shall be concealed by a stainless steel trim
shoe. Aluminum headrail with anti -grip profile shall provide overhead bracing and
span all compartments and brace the end pilaster to the back wall.
PART 3: EXECUTION
3.01 Installation - Compartments and urinal screens shall be installed in
accordance with installation instructions. All components shall be rigid, straight
and plumb. Doors and panels mounted 12" above the finished floor.
I of I tnneinc n.na . n,