HomeMy WebLinkAboutRESPONSE - BID - 5819 PICNIC TABLESebon nettee-fcaov. com.
Bid #5819
Picnic
Tables
Qty
Description
Unit Price
Extended
Leadtime
Colors
Available?
15 each
Mesh Picnic
Tables (see
�-
specifications
above
70 each
Aluminum
Picnic Tables
(see
$384.00
p
$26,880.
4 WEEKS
SILVER
specifications
above
Extended
Total (if
Both Items
Bid)
Vendor Name: ALUMINUM SEATING, INC.
Address: P.O. BOX 3 31 0
SAN BERNARDINO, CA 92413
Telephone# 800-757-732pAX# 909-388-2187
Respondent Name: BONNIE LITTLETON
(Plus rint)
By:_
(Signature)
SPECIFICATIONS FOR PN 30 PICNIC TABLE FOR CITY OF FORT COLLINS
DESIGN - CONFIGURATION
MANUFACTURER ALUMINUM SEATING, INC
P.O. BOX 3310
SAN BERNARDINO, CA 92413
PHONE ( 909 )884 - 9449
www.aluminumseating.com
800 )757 - SEAT FAX. ( 909 )388 - 2187
e - mail: sales@aluminumseating.com
TABLE TOP AND SEAT PLANKS PN 6 ( NOMINAL 2" X 10" OR ACTUAL 1.50" X 9.25" MINIMUM WALL
THICKNESS OF 0.093 INCH AND WEIGH NO LESS THAN 1.84 POUNDS PER LINEAL FOOT EXTRUDED
ALUMINUM ALLOY 6063-T6 ) SHALL BE DESIGNED TO SUPPORT A VERTICAL LOAD OF 240 POUNDS PER
18 INCHES OF SEATING LENGTH WITHOUT PERMANENT DEFORMATION. SEAT PLANK SHALL SUPPORT
200 POUNDS PER LINEAL FOOT SUPPORTED ON SIX FOOT ON CENTER WITH NO MORE THAN 0.25 INCH
DEFLECTION BETWEEN SUPPORTS PLANK SURFACES SHALL HAVE EXTRUDED SERRATIONS TO
PREVENT SLIPPAGE AND GLARE. THE TABLE TOP CONSISTS OF ( 3) PN 6 PLANKS LAID SIDE BY SIDE
WITH ONE 27.75" END CAP ON EACH END. THE SEAT CONSISTS OF ( 1) PN 6 PLANK WITH ONE 9.25" END
CAP ON EACH END. THE EXTRUDED ALUMINUM CHANNEL END CAPS SHALL HAVE A MINIMUM WALL
THICKNESS OF 0.090 INCH ( ALLOY 6063-T6 ).
FINISH
TABLE TOP AND SEAT PLANK SHALL HAVE A CLEAR ANODIZED FINISH WITH A MINIMUM GUARANTEED
THICKNESS OF 0.0004 INCH CONFORMING TO THE ALUMINUM ASSOCIATION ARCHITECTURAL STANDARD
AA-C22A31.
MATERIALS
ALUMINUM EXTRUSIONS ALLOY 6061 - T6 AND 6063 - T6 SHALL CONFORM TO THE STANDARDS
ESTABLISHED BY ANSI H35.1, ASTM B308, ASTM B221 AND THE ALUMINUM ASSOCIATION.
UNDER STRUCTURE 100% WELDED
PICNIC TABLE LEGS VRETICAL MEMBER SHALL CONSIST OF 2" X 2" X 0.093" ALUMINUM SQUARE TUBE
( 6061 - T6 ) AND 2" X 2" X 0.187" ALUMINUM ANGLE ( 6061 - T6 ). HORIZONTAL TABLE TOP AND SEAT
PLANKS MOUNTING FLANGE AND BASE ANGLE SHALL BE 2" X 3" X 0.188" ALUMINUM ANGLE ( 6061 - T6 ).
THE WELDED TABLE LEG SHALL BE CAPABLE OF WITHSTANDING A HORIZONTAL PRESSURE OF 750
POUNDS PER LEG. TABLE LEGS SHALL HAVE HOLES FOR ANCHOR BOLTING TABLE LEGS TO CONCRETE.
PICNIC TABLE CONSTRUCTION
TABLE TOP AND SEAT PLANKS SHALL BE ATTACHED TO THE LEGS SIX FOOT MAXIMUM ON CENTER, BY
USING (2) PN 129 CLIPS AND 5/16" X 1-1/4" CARRIAGE BOLT SETS PER PLANK PER FRAME.
P.O. BOX 3310
SAN BERNARDINO, CA 92413
(999)757-SEAT
t909)3884187 FAX.
10/23/2003
6'- 0 "
4'-5-
211
PLANK
L 2"X3"X3/1V"-/
9Y4
PN6 PLANK 2"X2- SO. TLIPN6 PLAN
I 2'X3"X3/16'
L 2" 2' X3/16" LEG
z xz SQ. I
L 2"X3"X3/16-L,,,
SEMON
PIOG?dOG FQ o Q
EEVANON
I
vxuuuul PN30@61
PAGE NO. 1 OF 1
SCALE NOT TO SCALE
C .L CR .1
FnUM T F ALw
