HomeMy WebLinkAboutRFP - P1032 VIDEO-PHOTO SIMULATION OF MULTI-MODAL (2)REQUEST FOR PROPOSAL
P1032 Video -Photo Simulation
of
Multi -Modal Transportation Corridor
Written proposals, five (5) will be received at the City of Fort Collins' Purchasing Division, 215 North
Mason St., 2nd floor, Fort Collins, Colorado 80524. Proposals will be received before 3:00 p.m. (our
clock), August 2, 2006. Proposal No. P1032. If delivered, they are to be sent to 215 North Mason
Street, 2"d Floor, Fort Collins, Colorado 80524. If mailed, the address is P.O. Box 580, Fort Collins,
80522-0580.
Questions concerning the scope of the project should be directed to Project Manager Kurt
Ravenschlag (970) 416-2040.
Questions regarding proposals submittal or process should be directed to John D. Stephen, CPPO,
CPPB, Senior Buyer (970) 221-6777.
This is a Federally Funded Project and the City encourages DBE participation.
A copy of the Proposal may be obtained as follows:
Download the Proposal/Bid from the BuySpeed Webpage,
https://secure2.fcqov.com/bso/login.esp
2. Come by Purchasing at 215 North Mason St., 2"d floor, Fort Collins, and request a
copy of the Proposal.
Sales Prohibited/Conflict of Interest: No officer, employee, or member of City Council, shall have a
financial interest in the sale to the City of any real or personal property, equipment, material, supplies
or services where such officer or employee exercises directly or indirectly any decision -making
authority concerning such sale or any supervisory authority over the services to be rendered. This
rule also applies to subcontracts with the City. Soliciting or accepting any gift, gratuity favor,
entertainment, kickback or any items of monetary value from any person who has or is seeking to do
business with the City of Fort Collins is prohibited.
Collusive or sham proposals: Any proposal deemed to be collusive or a sham proposal will be
rejected and reported to authorities as such. Your authorized signature of this proposal assures that
such proposal is genuine and is not a collusive or sham proposal.
The City of Fort Collins reserves the right to reject any and all proposals and to waive any
irregularities or informalities.
Sincerely,
James B. O'Neill Il, CPPO, FNIGP
Director of Purchasing & Risk Management
215 North Mason Street • 2"" Floor • P.O. Box 580 • Fort Collins, CO 80522-0580 • (970) 221-6775 • Fax (970) 221-6707 www.tegov.com
City's approval or acceptance of, or payment for, any of the services shall not be construed to
operate as a waiver of any rights or benefits provided to the City under this Agreement.
13. Default. Each and every term and condition hereof shall be deemed to be a
material element of this Agreement. In the event either party should fail or refuse to perform
according to the terms of this agreement, such party may be declared in default.
14. Remedies. In the event a party has been declared in default, such defaulting
party shall be allowed a period of ten (10) days within which to cure said default. In the event
the default remains uncorrected, the party declaring default may elect to (a) terminate the
Agreement and seek damages; (b) treat the Agreement as continuing and require specific
performance; or (c) avail himself of any other remedy at law or equity. If the non -defaulting
party commences legal or equitable actions against the defaulting party, the defaulting party
shall be liable to the non -defaulting party for the non -defaulting party's reasonable attorney fees
and costs incurred because of the default.
15. Binding Effect. This writing, together with the exhibits hereto, constitutes the
entire agreement between the parties and shall be binding upon said parties, their officers,
employees, agents and assigns and shall inure to the benefit of the respective survivors, heirs,
personal representatives, successors and assigns of said parties.
16. Law/Severability. The laws of the State of Colorado shall govern the
construction, interpretation, execution and enforcement of this Agreement. In the event any
provision of this Agreement shall be held invalid or unenforceable by any court of competent
jurisdiction, such holding shall not invalidate or render unenforceable any other provision of this
Agreement.
Professional Services Agreement —January, 2005
10
17. Special Provisions. [Optional] Special provisions or conditions relating to the
services to be performed pursuant to this Agreement are set forth in Exhibit "_", consisting of
( ) page[s], attached hereto and incorporated herein by this reference.
THE CITY OF FORT COLLINS, COLORADO
By:
James B. O'Neill II, CPPO, FNIGP
Director of Purchasing & Risk Management
DATE:
ATTEST:
City Clerk
APPROVED AS TO FORM:
Assistant City Attorney
[Insert Professional's name] or
[Insert Partnership Name] or
[Insert individual's name]
Doing business as [insert name of business]
By:
Title:
CORPORATE PRESIDENT OR VICE PRESIDENT
Date:
ATTEST:
Corporate Secretary
Professional Services Agreement —January, 2005
11
(Corporate Seal)
Best Practices Procurement Manual - Appendix A.1 Page 1
FEDERAL TRANSIT ADMINISTRATION
BEST PRACTICES PROCUREMENT MANUAL
TABLE OF CONTENTS (Appendix A - Governing Documents)
A.1 - Federally Required and Other Model Contract Clauses
1. Fly America Requirements
2. Buy America Requirements
3. Charter Bus and School Bus Requirements
4. Cargo Preference Requirements
5. Seismic Safety Requirements
6. Energy Conservation Requirements
7. Clean Water Requirements
8. Bus Testing
9. Pre -Award and Post Delivery Audit Requirements
10. Lobbying
11. Access to Records and Reports
12. Federal Changes
13. Bonding Requirements
14. Clean Air
15. Recycled Products
16. Davis -Bacon and Copeland Anti -Kickback Acts
17. Contract Work Hours and Safety Standards Act
18. [Reserved]
19. No Government Obligation to Third Parties
20. Program Fraud and False or Fraudulent Statements and Related Acts
21. Termination
22. Government -wide Debarment and Suspension (Nonprocurement)
23. Privacy Act
24. Civil Rights Requirements
25. Breaches and Dispute Resolution
26. Patent and Rights in Data
27. Transit Employee Protective Agreements
28. Disadvantaged Business Enterprises (DBE)
29. [Reserved]
30. Incorporation of Federal Transit Administration (FTA) Terms
31. Drug and Alcohol Testing
Professional Services Agreement -January, 2005
Best Practices Procurement Manual — Appendix A.l Page 2
1. FLY AMERICA REQUIREMENTS
49 U.S.C. § 40118
41 CFR Part 301-10
Applicability to Contracts
The Fly America requirements apply to the transportation of persons or property, by air, between
a place in the U.S. and a place outside the U.S., or between places outside the U.S., when the
FTA will participate in the costs of such air transportation. Transportation on a foreign air
carrier is permissible when provided by a foreign air carrier under a code share agreement when
the ticket identifies the U.S. air carrier's designator code and flight number. Transportation by a
foreign air carrier is also permissible if there is a bilateral or multilateral air transportation
agreement to which the U.S. Government and a foreign government are parties and which the
Federal DOT has determined meets the requirements of the Fly America Act.
Flow Down Requirements
The Fly America requirements flow down from FTA recipients and subrecipients to first tier
contractors, who are responsible for ensuring that lower tier contractors and subcontractors are in
compliance.
Model Clause/Language
The relevant statutes and regulations do not mandate any specified clause or language.
FTA proposes the following language.
Fly America Requirements
The Contractor agrees to comply with 49 U.S.C. 40118 (the "Fly America" Act) in accordance
with the General Services Administration's regulations at 41 CFR Part 301-10, which provide
that recipients and subrecipients of Federal funds and their contractors are required to use U.S.
Flag air carriers for U.S Government -financed international air travel and transportation of their
personal effects or property, to the extent such service is available, unless travel by foreign air
carrier is a matter of necessity, as defined by the Fly America Act. The Contractor shall submit,
if a foreign air carrier was used, an appropriate certification or memorandum adequately
explaining why service by a U.S. flag air carrier was not available or why it was necessary to use
a foreign air carrier and shall, in any event, provide a certificate of compliance with the Fly
America requirements. The Contractor agrees to include the requirements of this section in all
subcontracts that may involve international air transportation.
Professional Services Agreement —January, 2005
2
Best Practices Procurement Manual — Appendix A.1 Paee 3
2. BUY AMERICA REQUIREMENTS
49 U.S.C. 5323(j)
49 CFR Part 661
Applicability to Contracts
The Buy America requirements apply to the following types of contracts: Construction Contracts
and Acquisition of Goods or Rolling Stock (valued at more than $100,000).
Flow Down
The Buy America requirements flow down from FTA recipients and subrecipients to first tier
contractors, who are responsible for ensuring that lower tier contractors and subcontractors are in
compliance. The $100,000 threshold applies only to the grantee contract, subcontracts under that
amount are subject to Buy America.
Mandatory Clause/Laneuaee
The Buy America regulation, at 49 CFR 661.13, requires notification of the Buy America
requirements in FTA-funded contracts, but does not specify the language to be used. The
following language has been developed by FTA.
Buy America - The contractor agrees to comply with 49 U.S.C. 53230) and 49 C.F.R. Part 661,
which provide that Federal funds may not be obligated unless steel, iron, and manufactured
products used in FTA-funded projects are produced in the United States, unless a waiver has
been granted by FTA or the product is subject to a general waiver. General waivers are listed in
49 C.F.R. 661.7, and include final assembly in the United States for 15 passenger vans and 15
passenger wagons produced by Chrysler Corporation, and microcomputer equipment and
software. Separate requirements for rolling stock are set out at 49 U.S.C. 53230)(2)(C) and 49
C.F.R. 661.11. Rolling stock must be assembled in the United States and have a 60 percent
domestic content.
A bidder or offeror must submit to the FTA recipient the appropriate Buy America certification
(below) with all bids or offers on FTA-funded contracts, except those subject to a general
waiver. Bids or offers that are not accompanied by a completed Buy America certification must
be rejected as nonresponsive. This requirement does not apply to lower tier subcontractors.
Professional Services Agreement —January, 2005
3
Best Practices Procurement Manual — Appendix A.1 Page 4
Certification requirement for procurement of steel, iron, or manufactured products.
Certificate of Compliance with 49 U.S.C. 53230)(1)
The bidder or offeror hereby certifies that it will meet the requirements of 49 U.S.C. 53230)(1)
and the applicable regulations in 49 C.F.R. Part 661.5.
Date
Signature
Company Name
Title
Certificate ofNon-Compliance with 49 U.S.C. 53236)(1)
The bidder or offeror hereby certifies that it cannot comply with the requirements of 49 U.S.C.
53230)(1) and 49 C.F.R. 661.5, but it may qualify for an exception pursuant to 49 U.S.C.
53230)(2)(A), 53230)(2)(B), or 53230)(2)(D), and 49 C.F.R. 661.7.
Date
Signature
Company Name
Title
Professional Services Agreement January, 2005
4
Best Practices Procurement Manual — Appendix A.1 Page 5
Certification requirement for procurement of buses, other rolling stock and associated
equipment.
Certificate of Compliance with 49 U.S.C. 53236)(2)(C).
The bidder or offeror hereby certifies that it will comply with the requirements of 49 U.S.C.
53230)(2)(C) and the regulations at 49 C.F.R. Part 661.11.
Date
Signature
Company Name
Title
Certificate ofNon-Compliance with 49 U.S.C. 53230)(2)(C)
The bidder or offeror hereby certifies that it cannot comply with the requirements of 49 U.S.C.
53230)(2)(C) and 49 C.F.R. 661.11, but may qualify for an exception pursuant to 49 U.S.C.
53230)(2)(A), 53230)(2)(B), or 53230)(2)(D), and 49 CFR 661.7.
Date _
Signature
Company Name
Title
Professional Services Agreement —January, 2005
5
Best Practices Procurement Manual — Appendix A.1 Page 6
3. CHARTER BUS REQUIREMENTS
49 U.S.C.5323(d)
49 CFR Part 604
Applicability to Contracts
The Charter Bus requirements apply to the following type of contract: Operational Service
Contracts.
Flow Down Requirements
The Charter Bus requirements flow down from FTA recipients and subrecipients to first tier
service contractors.
Model Clause/Language
The relevant statutes and regulations do not mandate any specific clause or language. The
following clause has been developed by FTA.
Charter Service Operations - The contractor agrees to comply with 49 U.S.C. 5323(d) and 49
CFR Part 604, which provides that recipients and subrecipients of FTA assistance are prohibited
from providing charter service using federally funded equipment or facilities if there is at least
one private charter operator willing and able to provide the service, except under one of the
exceptions at 49 CFR 604.9. Any charter service provided under one of the exceptions must be
"incidental," i.e., it must not interfere with or detract from the provision of mass transportation.
3. SCHOOL BUS REQUIREMENTS
49 U.S.C.5323(F)
49 CFR Part 605
Applicability to Contracts
The School Bus requirements apply to the following type of contract: Operational Service
Contracts.
Flow Down Requirements
The School Bus requirements flow down from FTA recipients and subrecipients to first tier
service contractors.
Professional Services Agreement —January, 2005
Best Practices Procurement Manual — Appendix A.1 Page 7
Model Clause/Language
The relevant statutes and regulations do not mandate any specific clause or language. The
following clause has been developed by FTA.
School Bus Operations - Pursuant to 69 U.S.C. 5323(f) and 49 CFR Part 605, recipients and
subrecipients of FTA assistance may not engage in school bus operations exclusively for the
transportation of students and school personnel in competition with private school bus operators
unless qualified under specified exemptions. When operating exclusive school bus service under
an allowable exemption, recipients and subrecipients may not use federally funded equipment,
vehicles, or facilities.
4. CARGO PREFERENCE REQUIREMENTS
46 U.S.C. 1241
46 CFR Part 381
Applicability to Contracts
The Cargo Preference requirements apply to all contracts involving equipment, materials, or
commodities which may be transported by ocean vessels.
Flow Down
The Cargo Preference requirements apply to all subcontracts when the subcontract may be
involved with the transport of equipment, material, or commodities by ocean vessel.
Model Clause/Language
The MARAD regulations at 46 CFR 381.7 contain suggested contract clauses. The following
language is proffered by FTA.
Cargo Preference - Use of United States -Flag Vessels - The contractor agrees: a. to use
privately owned United States -Flag commercial vessels to ship at least 50 percent of the gross
tonnage (computed separately for dry bulk carriers, dry cargo liners, and tankers) involved,
whenever shipping any equipment, material, or commodities pursuant to the underlying contract
to the extent such vessels are available at fair and reasonable rates for United States -Flag
commercial vessels; b. to furnish within 20 working days following the date of loading for
shipments originating within the United States or within 30 working days following the date of
leading for shipments originating outside the United States, a legible copy of a rated, "on -board"
commercial ocean bill -of -lading in English for each shipment of cargo described in the
preceding pars rg aph to the Division of National Cargo, Office of Market Development, Maritime
Administration, Washington, DC 20590 and to the FTA recipient (through the contractor in the
case of a subcontractor's bill -of -lading.) c. to include these requirements in all subcontracts
Professional Services Agreement —January, 2005
7
Best Practices Procurement Manual — Appendix A.1 Page 8
issued pursuant to this contract when the subcontract may involve the transport of equipment,
material, or commodities by ocean vessel.
5. SEISMIC SAFETY REQUIREMENTS
42 U.S.C. 7701 et seq. 49
CFR Part 41
Applicability to Contracts
The Seismic Safety requirements apply only to contracts for the construction of new buildings or
additions to existing buildings.
Flow Down
The Seismic Safety requirements flow down from FTA recipients and subrecipients to first tier
contractors to assure compliance, with the applicable building standards for Seismic Safety,
including the work performed by all subcontractors.
Model Clauses/Language
The regulations do not provide suggested language for third -party contract clauses. The
following language has been developed by FTA.
Seismic Safety - The contractor agrees that any new building or addition to an existing building
will be designed and constructed in accordance with the standards for Seismic Safety required in
Department of Transportation Seismic Safety Regulations 49 CFR Part 41 and will certify to
compliance to the extent required by the regulation. The contractor also agrees to ensure that all
work performed under this contract including work performed by a subcontractor is in
compliance with the standards required by the Seismic Safety Regulations and the certification
of compliance issued on the project.
6. ENERGY CONSERVATION REQUIREMENTS
42 U.S.C. 6321 et seq.
49 CFR Part 18
Applicability to Contracts
The Energy Conservation requirements are applicable to all contracts.
Flow Down
The Energy Conservation requirements extend to all third party contractors and their contracts at
every tier and subrecipients and their subagreements at every tier.
Professional Services Agreement January, 2005
REQUEST FOR PROPOSAL
City of Fort Collins
Video/Photo Simulation of Multi -Modal Transportation Corridor
The City of Fort Collins is requesting proposals from a consulting firm or team to produce a
video and photo simulation of a 5.5-mile proposed Multi -Modal Corridor within our
community. The successful firm or team will address all of the tasks and deliverables in their
proposal, possess the requisite skills necessary to complete the project on time and within
the established budget, and be motivated to work with staff to accomplish the goals and
objectives associated with this project. The budget for this project is sufficient to cover the
tasks necessary to complete this project.
Proposals are due to the City of Fort Collins Purchasing Department at 3:00 pm (our clock),
on August 2, 2006. Oral interviews/presentations will be held the week of August 14, 2006,
with work beginning on or around August 21, 2006.
I. Introduction
The City of Fort Collins is requesting proposals from a consulting firm or team to produce a
DVD video and photo simulation of the 5.5-mile proposed Corridor.
The final video should include drive -through, fly -through and walk-through scenarios that
combine real video and photo imagery to demonstrate 'real' visualizations of future
conditions as well as describing and illustrating Bus Rapid Transit (BRT) technology.
II. Consultant Selection Process & Anticipated Project Timeline
RFP
Conduct Interviews
Select, Qualify, and Notify Consultant
Complete Consultant Contract Negotiations
........._
Field work and data collection
.....
Assemble data, photos, and video footage into
video and photo simulations
III. Scope of Work
2, 2006
The following is an outline of a general scope of work. The consultant firm/team should
expand on each of the tasks listed below. Additional tasks that the consultant firm/team
determines necessary to assure a good product should be added to this list.
1) Data Collection required to complete scope:
a) High -resolution aerial orthophotography of the Mason Transportation Corridor and
surrounding area (City will provide).
b) Photography/video footage of the corridor.
c) Curb, land and traffic control configuration in CAD format.
d) Existing/planned land use, building footprints and topography in CAD format.
7
Best Practices Procurement Manual — Appendix A.1 Page 9
Model Clause/Language
No specific clause is recommended in the regulations because the Energy Conservation
requirements are so dependent on the state energy conservation plan. The following language
has been developed by FTA:
Energy Conservation - The contractor agrees to comply with mandatory standards and policies
relating to energy efficiency which are contained in the state energy conservation plan issued in
compliance with the Energy Policy and Conservation Act.
7. CLEAN WATER REQUIREMENTS
33 U.S.C. 1251
Applicability to Contracts
The Clean Water requirements apply to each contract and subcontract which exceeds $100,000.
Flow Down
The Clean Water requirements flow down to FTA recipients and subrecipients at every tier.
Model Clause/Language
While no mandatory clause is contained in the Federal Water Pollution Control Act, as amended,
the following language developed by FTA contains all the mandatory requirements:
Clean Water - (1) The Contractor agrees to comply with all applicable standards, orders or
regulations issued pursuant to the Federal Water Pollution Control Act, as amended, 33 U.S.C.
1251 et sue. The Contractor agrees to report each violation to the Purchaser and understands and
agrees that the Purchaser will, in turn, report each violation as required to assure notification to
FTA and the appropriate EPA Regional Office.
(2) The Contractor also agrees to include these requirements in each subcontract exceeding
$100,000 financed in whole or in part with Federal assistance provided by FTA.
8. BUS TESTING
49 U.S.C. 5323(c)
49 CFR Part 665
Applicability to Contracts
The Bus Testing requirements pertain only to the acquisition of Rolling Stock/Turnkey.
Professional Services Agreement —January, 2005
Best Practices Procurement Manual — Appendix A.1 Paee 10
Flow Down
The Bus Testing requirements should not flow down, except to the turnkey contractor as stated in
Master Agreement.
Model Clause/Language
Clause and language therein are merely suggested. 49 CFR Part 665 does not contain specific
language to be included in third party contracts but does contain requirements applicable to
subrecipients and third party contractors. Bus Testing Certification and language therein are
merely suggested.
Bus Testing - The Contractor [Manufacturer] agrees to comply with 49 U.S.C. A 5323(c) and
FTA's implementing regulation at 49 CFR Part 665 and shall perform the following:
1) A manufacturer of a new bus model or a bus produced with a major change in components or
configuration shall provide a copy of the final test report to the recipient at a point in the
procurement process specified by the recipient which will be prior to the recipient's final
acceptance of the first vehicle.
2) A manufacturer who releases a report under paragraph 1 above shall provide notice to the
operator of the testing facility that the report is available to the public.
3) If the manufacturer represents that the vehicle was previously tested, the vehicle being sold
should have the identical configuration and major components as the vehicle in the test report,
which must be provided to the recipient prior to recipient's final acceptance of the first vehicle.
If the configuration or components are not identical, the manufacturer shall provide a description
of the change and the manufacturer's basis for concluding that it is not a major change requiring
additional testing.
4) If the manufacturer represents that the vehicle is "grandfathered" (has been used in mass
transit service in the United States before October 1, 1988, and is currently being produced
without a major change in configuration or components), the manufacturer shall provide the
name and address of the recipient of such a vehicle and the details of that vehicle's configuration
and major components.
Professional Services Agreement —January, 2005
10
Best Practices Procurement Manual — Appendix A.1 Page 11
CERTIFICATION OF COMPLIANCE WITH FTA'S BUS TESTING REQUIREMENTS
The undersigned [Contractor/Manufacturer] certifies that the vehicle offered in this procurement
complies with 49 U.S.C. A 5323(c) and FTA's implementing regulation at 49 CFR Part 665.
The undersigned understands that misrepresenting the testing status of a vehicle acquired with
Federal financial assistance may subject the undersigned to civil penalties as outlined in the
Department of Transportation's regulation on Program Fraud Civil Remedies, 49 CFR Part 31.
In addition, the undersigned understands that FTA may suspend or debar a manufacturer under
the procedures in 49 CFR Part 29.
Date:
Signature:
Company Name:
Title:
9. PRE -AWARD AND POST DELIVERY AUDITS REQUIREMENTS
49 U.S.C. 5323
49 CFR Part 663
Applicability to Contracts
These requirements apply only to the acquisition of Rolling Stock/Turnkey.
Flow Down
These requirements should not flow down, except to the turnkey contractor as stated in Master
Agreement.
Model Clause/Language
Clause and language therein are merely suggested. 49 C.F.R. Part 663 does not contain specific
language to be included in third party contracts but does contain requirements applicable to
subrecipients and third party contractors.
- Buy America certification is mandated under FTA regulation, "Pre -Award and Post -Delivery
Audits of Rolling Stock Purchases," 49 C.F.R. 663.13.
-- Specific language for the Buy America certification is mandated by FTA regulation,
"Buy America Requirements --Surface Transportation Assistance Act of 1982, as amended,"
Professional Services Agreement —January, 2005
Best Practices Procurement Manual — Appendix A.1 Page 12
49 C.F.R. 661.12, but has been modified to include FTA's Buy America requirements codified at
49 U.S.C. A 53230).
Pre -Award and Post -Delivery Audit Requirements - The Contractor agrees to comply with 49
U.S.C. § 5323(1) and FTA's implementing regulation at 49 C.F.R. Part 663 and to submit the
following certifications:
(1) Buy America Requirements: The Contractor shall complete and submit a declaration
certifying either compliance or noncompliance with Buy America. If the Bidder/Offeror certifies
compliance with Buy America, it shall submit documentation which lists 1) component and
subcomponent parts of the rolling stock to be purchased identified by manufacturer of the parts,
their country of origin and costs; and 2) the location of the final assembly point for the rolling
stock, including a description of the activities that will take place at the final assembly point and
the cost of final assembly.
(2) Solicitation Specification Requirements: The Contractor shall submit evidence that it will be
capable of meeting the bid specifications.
(3) Federal Motor Vehicle Safety Standards (FMVSS): The Contractor shall submit 1)
manufacturer's FMVSS self -certification sticker information that the vehicle complies with
relevant FMVSS or 2) manufacturer's certified statement that the contracted buses will not be
subject to FMVSS regulations.
Professional Services Agreement —January, 2005
12
Best Practices Procurement Manual — Appendix A.1 Page 13
BUY AMERICA CERTIFICATE OF COMPLIANCE WITH FTA REQUIREMENTS
FOR BUSES, OTHER ROLLING STOCK, OR ASSOCIATED EQUIPMENT
(To be submitted with a bid or offer exceeding the small purchase threshold for Federal
assistance programs, currently set at $100, 000.)
Certificate of Compliance
The bidder hereby certifies that it will comply with the requirements of 49 U.S.C. Section
53230)(2)(C), Section 165(b)(3) of the Surface Transportation Assistance Act of 1982, as
amended, and the regulations of 49 C.F.R. 661.11:
Date:
Signature:
Company Name:
Title:
Certificate of Non -Compliance
The bidder hereby certifies that it cannot comply with the requirements of 49 U.S.C. Section
53230)(2)(C) and Section 165(b)(3) of the Surface Transportation Assistance Act of 1982, as
amended, but may qualify for an exception to the requirements consistent with 49 U.S.C.
Sections 53230)(2)(B) or 0)(2)(D), Sections 165(b)(2) or (b)(4) of the Surface Transportation
Assistance Act, as amended, and regulations in 49 C.F.R. 661.7.
Date:
Signature:
Company Name:
Title:
Professional Services Agreement —January, 2005
13
Best Practices Procurement Manual — Aypendix A.1 Pale 14
10. LOBBYING
31 U.S.C. 1352
49 CFR Part 19
49 CFR Part 20
Applicability to Contracts
The Lobbying requirements apply to Construction/Architectural and Engineering/Acquisition of
Rolling Stock/Professional Service Contract/Operational Service Contract/Turnkey contracts.
Flow Down
The Lobbying requirements mandate the maximum flow down, pursuant to Byrd Anti -Lobbying
Amendment, 31 U.S.C. § 1352(b)(5) and 49 C.F.R. Part 19, Appendix A, Section 7.
Mandatory Clause/Language
Clause and specific language therein are mandated by 49 CFR Part 19, Appendix A.
Modifications have been made to the Clause pursuant to Section 10 of the Lobbying Disclosure
Act of 1995, P.L. 104-65 [to be codified at 2 U.S.C. § 1601, et seq.]
- Lobbying Certification and Disclosure of Lobbying Activities for third party contractors are
mandated by 31 U.S.C. 1352(b)(5), as amended by Section 10 of the Lobbying Disclosure Act of
1995, and DOT implementing regulation, "New Restrictions on Lobbying," at 49 CFR §
20.110(d)
- Language in Lobbying Certification is mandated by 49 CFR Part 19, Appendix A, Section 7,
which provides that contractors file the certification required by 49 CFR Part 20, Appendix A.
Modifications have been made to the Lobbying Certification pursuant to Section 10 of the
Lobbying Disclosure Act of 1995.
- Use of "Disclosure of Lobbying Activities," Standard Form-LLL set forth in Appendix B of 49
CFR Part 20, as amended by "Government wide Guidance For New Restrictions on Lobbying,"
61 Fed. Reg. 1413 (1/19/96) is mandated by 49 CFR Part 20, Appendix A.
Byrd Anti -Lobbying Amendment, 31 U.S.C. 1352, as amended by the Lobbying Disclosure
Act of 1995, P.L. 104-65 [to be codified at 2 U.S.C. § 1601, et seq.] - Contractors who apply or
bid for an award of $100,000 or more shall file the certification required by 49 CFR part 20,
"New Restrictions on Lobbying." Each tier certifies to the tier above that it will not and has not
used Federal appropriated funds to pay any person or organization for influencing or attempting
to influence an officer or employee of any agency, a member of Congress, officer or employee of
Congress, or an employee of a member of Congress in connection with obtaining any Federal
Professional Services Agreement —January, 2005
14
Best Practices Procurement Manual — Appendix A.1 Page 15
contract, grant or any other award covered by 31 U.S.C. 1352. Each tier shall also disclose the
name of any registrant under the Lobbying Disclosure Act of 1995 who has made lobbying
contacts on its behalf with non -Federal funds with respect to that Federal contract, grant or award
covered by 31 U.S.C. 1352. Such disclosures are forwarded from tier to tier up to the recipient.
APPENDIX A, 49 CFR PART 20--CERTIFICATION REGARDING LOBBYING
Certification for Contracts, Grants, Loans, and Cooperative Agreements
(To be submitted with each bid or offer exceeding $100, 000)
The undersigned [Contractor] certifies, to the best of his or her knowledge and belief, that:
(1) No Federal appropriated funds have been paid or will be paid, by or on behalf of the
undersigned, to any person for influencing or attempting to influence an officer or employee of
an agency, a Member of Congress, an officer or employee of Congress, or an employee of a
Member of Congress in connection with the awarding of any Federal contract, the making of any
Federal grant, the making of any Federal loan, the entering into of any cooperative agreement,
and the extension, continuation, renewal, amendment, or modification of any Federal contract,
grant, loan, or cooperative agreement.
(2) If any funds other than Federal appropriated funds have been paid or will be paid to any
person for making lobbying contacts to an officer or employee of any agency, a Member of
Congress, an officer or employee of Congress, or an employee of a Member of Congress in
connection with this Federal contract, grant, loan, or cooperative agreement, the undersigned
shall complete and submit Standard Form--LLL, "Disclosure Form to Report Lobbying," in
accordance with its instructions [as amended by "Government wide Guidance for New
Restrictions on Lobbying," 61 Fed. Reg. 1413 (1/19/96). Note: Language in paragraph (2)
herein has been modified in accordance with Section 10 of the Lobbying Disclosure Act of 1995
(P.L. 104-65, to be codified at 2 U.S.C. 1601, et seq.)]
(3) The undersigned shall require that the language of this certification be included in the award
documents for all subawards at all tiers (including subcontracts, subgrants, and contracts under
grants, loans, and cooperative agreements) and that all subrecipients shall certify and disclose
accordingly.
This certification is a material representation of fact upon which reliance was placed when this
transaction was made or entered into. Submission of this certification is a prerequisite for
making or entering into this transaction imposed by 31, U.S.C. § 1352 (as amended by the
Lobbying Disclosure Act of 1995). Any person who fails to file the required certification shall
be subject to a civil penalty of not less than $10,000 and not more than $100,000 for each such
failure.
Professional Services Agreement —January, 2005
15
Best Practices Procurement Manual — Appendix A.1 Page 16
[Note: Pursuant to 31 U.S.C. § 1352(c)(l)-(2)(A), any person who makes a prohibited
expenditure or fails to file or amend a required certification or disclosure form shall be subject to
a civil penalty of not less than $10,000 and not more than $100,000 for each such expenditure or
failure.]
The Contractor, , certifies or affirms the truthfulness and accuracy of
each statement of its certification and disclosure, if any. In addition, the Contractor understands
and agrees that the provisions of 31 U.S.C. A 3801, et seq., apply to this certification and
disclosure, if any.
Signature of Contractor's Authorized Official
Name and Title of Contractor's Authorized Official
Date
11. ACCESS TO RECORDS AND REPORTS
49 U.S.C. 5325
18 CFR 18.36 (i)
49 CFR 633.17
Applicability to Contracts
Reference Chart "Requirements for Access to Records and Reports by Type of Contracts"
Flow Down
FTA does not require the inclusion of these requirements in subcontracts.
Model Clause/Language
The specified language is not mandated by the statutes or regulations referenced, but the
language provided paraphrases the statutory or regulatory language.
Access to Records - The following access to records requirements apply to this Contract:
1. Where the Purchaser is not a State but a local government and is the FTA Recipient or a
subgrantee of the FTA Recipient in accordance with 49 C.F.R. 18.36(i), the Contractor agrees to
provide the Purchaser, the FTA Administrator, the Comptroller General of the United States or
any of their authorized representatives access to any books, documents, papers and records of the
Contractor which are directly pertinent to this contract for the purposes of making audits,
examinations, excerpts and transcriptions. Contractor also agrees, pursuant to 49 C.F.R. 633.17
to provide the FTA Administrator or his authorized representatives including any PMO
Contractor access to Contractor's records and construction sites pertaining to a major capital
Professional Services Agreement —January, 2005
16
Best Practices Procurement Manual — Appendix A.1 Page 17
project, defined at 49 U.S.C. 5302(a)l, which is receiving federal financial assistance through the
programs described at 49 U.S.C. 5307, 5309 or 5311.
2. Where the Purchaser is a State and is the FTA Recipient or a subgrantee of the FTA Recipient
in accordance with 49 C.F.R. 633.17, Contractor agrees to provide the Purchaser, the FTA
Administrator or his authorized representatives, including any PMO Contractor, access to the
Contractor's records and construction sites pertaining to a major capital project, defined at 49
U.S.C. 5302(a)l, which is receiving federal financial assistance through the programs described
at 49 U.S.C. 5307, 5309 or 5311. By definition, a major capital project excludes contracts of less
than the simplified acquisition threshold currently set at $100,000.
3. Where the Purchaser enters into a negotiated contract for other than a small purchase or under
the simplified acquisition threshold and is an institution of higher education, a hospital or other
non-profit organization and is the FTA Recipient or a subgrantee of the FTA Recipient in
accordance with 49 C.F.R. 19.48, Contractor agrees to provide the Purchaser, FTA
Administrator, the Comptroller General of the United States or any of their duly authorized
representatives with access to any books, documents, papers and record of the Contractor which
are directly pertinent to this contract for the purposes of making audits, examinations, excerpts
and transcriptions.
4. Where any Purchaser which is the FTA Recipient or a subgrantee of the FTA Recipient in
accordance with 49 U.S.C. 5325(a) enters into a contract for a capital project or improvement
(defined at 49 U.S.C. 5302(a)l) through other than competitive bidding, the Contractor shall
make available records related to the contract to the Purchaser, the Secretary of Transportation
and the Comptroller General or any authorized officer or employee of any of them for the
purposes of conducting an audit and inspection.
5. The Contractor agrees to permit any of the foregoing parties to reproduce by any means
whatsoever or to copy excerpts and transcriptions as reasonably needed.
6. The Contractor agrees to maintain all books, records, accounts and reports required under this
contract for a period of not less than three years after the date of termination or expiration of this
contract, except in the event of litigation or settlement of claims arising from the performance of
this contract, in which case Contractor agrees to maintain same until the Purchaser, the FTA
Administrator, the Comptroller General, or any of their duly authorized representatives, have
disposed of all such litigation, appeals, claims or exceptions related thereto. Reference 49 CFR
18.39(i)(11).
7. FTA does not require the inclusion of these requirements in subcontracts.
Professional Services Agreement —January, 2005
17
Best Practices Procurement Manual — Appendix A.I Page 18
Requirements for Access to Records and Reports by Types of Contract
Contract
Operational
Turnkey
Construction
Architectural
Acquisition of
Professional
Characteristics
Service
Engineering
Rolling Stock
Services
Contract
I State Grantees
None
Those imposed
None
None
None
None ,
a. Contracts
on state pass
below SAT
thru to
($100,000)
None
Contractor
Yes, if non-
None unless
None unless
None unless
unless' non-
competitive
non-
non-
non-
b. Contracts
competitive
award or if
competitive
competitive
competitive
above
award
funded thru2
award
award
award
$100,000/Capital
5307/5309/53
Projects
11
11 Non State
Grantees
Those imposed
Yes
on non -state
Yes
Yes
Yes
Yes
a. Contracts
Grantee pass
below SAT
Yes
thru to
Yes
Yes
Yes
Yes
($100,000)
Contractor
b. Contracts
above
$100,000/Capital
Projects
Sources of Authority:
149 USC 5325 (a)
2 49 CFR 633.17
318 CFR 18.36 (i)
12. FEDERAL CHANGES
49 CFR Part 18
Applicability to Contracts
The Federal Changes requirement applies to all contracts.
Flow Down
The Federal Changes requirement flows down appropriately to each applicable changed
requirement.
Model Clause/Language
No specific language is mandated. The following language has been developed by FTA.
Professional Services Agreement January, 2005
18
e) Corridor diagram with station locations and general alignment (City will provide).
f) Station configuration sketch.
2) Develop and maintain a project schedule that includes Drafts/Reviews/Milestones
3) Project deliverables
a) Final deliverable
will be 10 copies of a 6-10 minute DVD that include, but are not
limited to:
(1)
DVD Video: titles, editing narration and background music where
appropriate.
(2)
Map Animation: A DVD-quality 3D animation of the alignment illustrating the
BRT route and feeder routes; and station locations using aerial photography.
(3)
Corridor Animation. A DVD-quality 3D animation of the corridor alignment.
The animation should include 3D modeling of all the future adjacent
buildings (redevelopment: TOD's, and TAD), streets, sidewalks, vegetation,
streetscaping, pedestrians, bicycles, cars, and BRT infrastructure
(stations/stops) and vehicles.
(4)
The video should clearly show the transformation of the corridor with focus
on the Transit Oriented Development (TOD) redevelopment potential for
new residential, commercial and retail centers, and to illustrate the active
street front.
(5)
Photosimulations: "Before and After" photosimulations at various locations
with BRT and infrastructure inserted from matched 3D renderings.
(6)
Briefly incorporate or describe how all transportation modes will use the
corridor in order to give the citizens a better understanding of how the BRT
service will operate along side autos, bikes, pedestrians, buses and freight
rail. The video should inspire developers and excite the community on what
this corridor can become.
(7)
Windows Media format files of each clip produced.
(8)
Image files (high and medium resolution; Jpeg/.tiff/.eps) of still renderings
and photo simulations
(9)
The video animation will be broadcast -quality and provided in .AVI, and DVD
formats.
4) Provide information on your firm/team capability and availability. Include firm profile and
project team.
5) Demonstrate prior experience with similar transportation 3D video/photo simulation
projects. Include current project references, photo and/or video examples and detailed
project description.
3
Best Practices Procurement Manual — Appendix A.1 Page 19
Federal Changes - Contractor shall at all times comply with all applicable FTA regulations,
policies, procedures and directives, including without limitation those listed directly or by
reference in the Master Agreement between Purchaser and FTA, as they may be amended or
promulgated from time to time during the term of this contract. Contractor's failure to so comply
shall constitute a material breach of this contract.
13. BONDING REQUIREMENTS
Applicability to Contracts
For those construction or facility improvement contracts or subcontracts exceeding
$100,000, FTA may accept the bonding policy and requirements of the recipient,
provided that they meet the minimum requirements for construction contracts as
follows:
a. A bid guarantee from each bidder equivalent to five (5) percent of the bid price. The "bid
guarantees" shall consist of a firm commitment such as a bid bond, certifies check, or other
negotiable instrument accompanying a bid as assurance that the bidder will, upon acceptance of
his bid, execute such contractual documents as may be required within the time specified.
b. A performance bond on the part to the Contractor for 100 percent of the contract price. A
"performance bond" is one executed in connection with a contract to secure fulfillment of all the
contractor's obligations under such contract.
c. A payment bond on the part of the contractor for 100 percent of the contract price. A
"payment bond" is one executed in connection with a contract to assure payment, as required by
law, of all persons supplying labor and material in the execution of the work provided for in the
contract. Payment bond amounts required from Contractors are as follows:
(1) 50% of the contract price if the contract price is not more than $1 million;
(2) 40% of the contract price if the contract price is more than $1 million but not more than $5
million; or
(3) $2.5 million if the contract price is more than $5 million.
d. A cash deposit, certified check or other negotiable instrument may be accepted by a grantee in
lieu of performance and payment bonds, provided the grantee has established a procedure to
assure that the interest of FTA is adequately protected. An irrevocable letter of credit would also
satisfy the requirement for a bond.
Flow Down
Bonding requirements flow down to the first tier contractors.
Professional Services Agreement —January, 2005
19
Best Practices Procurement Manual — Appendix A.I Page 20
Model Clauses/Language
FTA does not prescribe specific wording to be included in third party contracts. FTA has
prepared sample clauses as follows:
Bid Bond Requirements (Construction)
(a) Bid Security
A Bid Bond must be issued by a fully qualified surety company acceptable to (Recipient) and
listed as a company currently authorized under 31 CFR, Part 223 as possessing a Certificate of
Authority as described thereunder.
(b) Rights Reserved
In submitting this Bid, it is understood and agreed by bidder that the right is reserved by
(Recipient) to reject any and all bids, or part of any bid, and it is agreed that the Bid may not be
withdrawn for a period of [ninety (90)] days subsequent to the opening of bids, without the
written consent of (Recipient).
It is also understood and agreed that if the undersigned bidder should withdraw any part or all of
his bid within [ninety (90)] days after the bid opening without the written consent of (Recipient),
shall refuse or be unable to enter into this Contract, as provided above, or refuse or be unable to
furnish adequate and acceptable Performance Bonds and Labor and Material Payments Bonds, as
provided above, or refuse or be unable to furnish adequate and acceptable insurance, as provided
above, he shall forfeit his bid security to the extent of (Recipient's) damages occasioned by such
withdrawal, or refusal, or inability to enter into an agreement, or provide adequate security
therefor.
It is further understood and agreed that to the extent the defaulting bidder's Bid Bond, Certified
Check, Cashier's Check, Treasurer's Check, and/or Official Bank Check (excluding any income
generated thereby which has been retained by (Recipient) as provided in [Item x "Bid Security"
of the Instructions to Bidders]) shall prove inadequate to fully recompense (Recipient) for the
damages occasioned by default, then the undersigned bidder agrees to indemnify (Recipient) and
pay over to (Recipient) the difference between the bid security and (Recipient's) total damages,
so as to make (Recipient) whole.
The undersigned understands that any material alteration of any of the above or any of the
material contained on this form, other than that requested, will render the bid unresponsive.
Performance and Payment Bonding Requirements (Construction)
Professional Services Agreement —January, 2005
20
Best Practices Procurement Manual — Appendix A.1 Page 21
The Contractor shall be required to obtain performance and payment bonds as follows:
(a) Performance bonds
1. The penal amount of performance bonds shall be 100 percent of the original contract price,
unless the (Recipient) determines that a lesser amount would be adequate for the protection of
the (Recipient).
2. The (Recipient) may require additional performance bond protection when a contract price is
increased. The increase in protection shall generally equal 100 percent of the increase in contract
price. The (Recipient) may secure additional protection by directing the Contractor to increase
the penal amount of the existing bond or to obtain an additional bond.
(b) Payment bonds
1. The penal amount of the payment bonds shall equal:
(i) Fifty percent of the contract price if the contract price is not more than $1 million.
(ii) Forty percent of the contract price if the contract price is more than $1 million but not more
than $5 million; or
(iii) Two and one half million if the contract price is more than $5 million.
2. If the original contract price is $5 million or less, the (Recipient) may require additional
protection as required by subparagraph 1 if the contract price is increased.
Performance and Payment Bonding Requirements (Non -Construction)
The Contractor may be required to obtain performance and payment bonds when necessary to
protect the (Recipient's) interest.
(a) The following situations may warrant a performance bond:
1. (Recipient) property or funds are to be provided to the contractor for use in performing the
contract or as partial compensation (as in retention of salvaged material).
2. A contractor sells assets to or merges with another concern, and the (Recipient), after
recognizing the latter concern as the successor in interest, desires assurance that it is financially
capable.
3. Substantial progress payments are made before delivery of end items starts.
Professional Services Agreement —January, 2005
21
Best Practices Procurement Manual — Appendix A.1 Page 22
4. Contracts are for dismantling, demolition, or removal of improvements.
(b) When it is determined that a performance bond is required, the Contractor shall be required to
obtain performance bonds as follows:
1. The penal amount of performance bonds shall be 100 percent of the original contract price,
unless the (Recipient) determines that a lesser amount would be adequate for the protection of
the (Recipient).
2. The (Recipient) may require additional performance bond protection when a contract price is
increased. The increase in protection shall generally equal 100 percent of the increase in contract
price. The (Recipient) may secure additional protection by directing the Contractor to increase
the penal amount of the existing bond or to obtain an additional bond.
(c) A payment bond is required only when a performance bond is required, and if the use of
payment bond is in the (Recipient's) interest.
(d) When it is determined that a payment bond is required, the Contractor shall be required to
obtain payment bonds as follows:
1. The penal amount of payment bonds shall equal:
(i) Fifty percent of the contract price if the contract price is not more than $1 million;
(ii) Forty percent of the contract price if the contract price is more than $1 million but not more
than $5 million; or
(iii) Two and one half million if the contract price is increased.
Advance Payment Bonding Requirements
The Contractor may be required to obtain an advance payment bond if the contract contains an
advance payment provision and a performance bond is not furnished. The (recipient) shall
determine the amount of the advance payment bond necessary to protect the (Recipient).
Patent Infringement Bonding Requirements (Patent Indemnity)
The Contractor may be required to obtain a patent indemnity bond if a performance bond is not
furnished and the financial responsibility of the Contractor is unknown or doubtful. The
(recipient) shall determine the amount of the patent indemnity to protect the (Recipient).
Professional Services Agreement —January, 2005
22
Best Practices Procurement Manual — Appendix A.1 Pa e --
Warranty of the Work and Maintenance Bonds
1. The Contractor warrants to (Recipient), the Architect and/or Engineer that all materials and
equipment furnished under this Contract will be of highest quality and new unless otherwise
specified by (Recipient), free from faults and defects and in conformance with the Contract
Documents. All work not so conforming to these standards shall be considered defective. If
required by the [Project Manager], the Contractor shall furnish satisfactory evidence as to the
kind and quality of materials and equipment.
2. The Work furnished must be of first quality and the workmanship must be the best obtainable
in the various trades. The Work must be of safe, substantial and durable construction in all
respects. The Contractor hereby guarantees the Work against defective materials or faulty
workmanship for a minimum period of one (1) year after Final Payment by (Recipient) and shall
replace or repair any defective materials or equipment or faulty workmanship during the period
of the guarantee at no cost to (Recipient). As additional security for these guarantees, the
Contractor shall, prior to the release of Final Payment [as provided in Item X below], furnish
separate Maintenance (or Guarantee) Bonds in form acceptable to (Recipient) written by the
same corporate surety that provides the Performance Bond and Labor and Material Payment
Bond for this Contract. These bonds shall secure the Contractor's obligation to replace or repair
defective materials and faulty workmanship for a minimum period of one (1) year after Final
Payment and shall be written in an amount equal to ONE HUNDRED PERCENT (100%) of the
CONTRACT SUM, as adjusted (if at all).
14. CLEAN AIR
42 U.S.C. 7401 et seq
40 CFR 15.61
49 CFR Part 18
Applicability to Contracts
The Clean Air requirements apply to all contracts exceeding $100,000, including indefinite
quantities where the amount is expected to exceed $100,000 in any year.
Flow Down
The Clean Air requirements flow down to all subcontracts which exceed $100,000.
Model Clauses/LanEuag
No specific language is required. FTA has proposed the following language.
Professional Services Agreement —January, 2005
23
Best Practices Procurement Manual — Appendix A.1 Page 24
Clean Air - (1) The Contractor agrees to comply with all applicable standards, orders or
regulations issued pursuant to the Clean Air Act, as amended, 42 U.S.C. §§ 7401 et seq. The
Contractor agrees to report each violation to the Purchaser and understands and agrees that the
Purchaser will, in turn, report each violation as required to assure notification to FTA and the
appropriate EPA Regional Office.
(2) The Contractor also agrees to include these requirements in each subcontract exceeding
$100,000 financed in whole or in part with Federal assistance provided by FTA.
15. RECYCLED PRODUCTS
42 U.S.C. 6962
40 CFR Part 247
Executive Order 12873
Applicability to Contracts
The Recycled Products requirements apply to all contracts for items designated by the EPA,
when the purchaser or contractor procures $10,000 or more of one of these items during the
fiscal year, or has procured $10,000 or more of such items in the previous fiscal year, using
Federal funds. New requirements for "recovered materials" will become effective May 1, 1996.
These new regulations apply to all procurement actions involving items designated by the EPA,
where the procuring agency purchases $10,000 or more of one of these items in a fiscal year, or
when the cost of such items purchased during the previous fiscal year was $10,000,
Flow Down
These requirements flow down to all to all contractor and subcontractor tiers.
Model Clause/Language
No specific clause is mandated, but FTA has developed the following language.
Recovered Materials - The contractor agrees to comply with all the requirements of Section
6002 of the Resource Conservation and Rec6very Act (RCRA), as amended (42 U.S.C. 6962),
including but not limited to the regulatory provisions of 40 CFR Part 247, and Executive Order
12873, as they apply to the procurement of the items designated in Subpart B of 40 CFR Part
247.
16. DAVIS-BACON AND COPELAND ANTI -KICKBACK ACTS
Background and Application
The Davis -Bacon and Copeland Acts are codified at 40 USC 3141, et seq. and 18 USC 874. The
Acts apply to grantee construction contracts and subcontracts that "at least partly are financed by
Professional Services Agreement —January, 2005
24
Best Practices Procurement Manual — Appendix A.l Page 25
a loan or grant from the Federal Government." 40 USC 3145(a), 29 CFR 5.2(h), 49 CFR
18.36(i)(5). The Acts apply to any construction contract over $2,000. 40 USC 3142(a), 29 CFR
5.5(a). `Construction,' for purposes of the Acts, includes "actual construction, alteration and/or
repair, including painting and decorating." 29 CFR 5.5(a). The requirements of both Acts are
incorporated into a single clause (see 29 CFR 3.11) enumerated at 29 CFR 5.5(a) and reproduced
below.
The clause language is drawn directly from 29 CFR 5.5(a) and any deviation from the model
clause below should be coordinated with counsel to ensure the Acts' requirements are satisfied.
Clause Language
Davis -Bacon and Copeland Anti -
Kickback Acts
(1) Minimum wages - (i) All laborers and mechanics employed or working upon the site of the
work (or under the United States Housing Act of 1937 or under the Housing Act of 1949 in the
construction or development of the project), will be paid unconditionally and not less often than
once a week, and without subsequent deduction or rebate on any account (except such payroll
deductions as are permitted by regulations issued by the Secretary of Labor under the Copeland
Act (29 CFR part 3)), the full amount of wages and bona fide fringe benefits (or cash equivalents
thereof) due at time of payment computed at rates not less than those contained in the wage
determination of the Secretary of Labor which is attached hereto and made a part hereof,
regardless of any contractual relationship which may be alleged to exist between the contractor
and such laborers and mechanics.
Contributions made or costs reasonably anticipated for bona fide fringe benefits under section
1(b)(2) of the Davis -Bacon Act on behalf of laborers or mechanics are considered wages paid to
such laborers or mechanics, subject to the provisions of paragraph (1)(iv) of this section; also,
regular contributions made or costs incurred for more than a weekly period (but not less often
than quarterly) under plans, funds, or programs which cover the particular weekly period, are
deemed to be constructively made or incurred during such weekly period. Such laborers and
mechanics shall be paid the appropriate wage rate and fringe benefits on the wage determination
for the classification of work actually performed, without regard to skill, except as provided in
29 CFR Part 5.5(a)(4). Laborers or mechanics performing work in more than one classification
may be compensated at the rate specified for each classification for the time actually worked
therein: Provided, That the employer's payroll records accurately set forth the time spent in each
classification in which work is performed. The wage determination (including any additional
classifications and wage rates conformed under paragraph (1)(ii) of this section) and the Davis -
Bacon poster (WH-1321) shall be posted at all times by the contractor and its subcontractors at
Professional Services Agreement —January, 2005
25
Best Practices Procurement Manual — Appendix A.1 Pag_e 26
the site of the work in a prominent and accessible place where it can be easily seen by the
workers.
(ii)(A) The contracting officer shall require that any class of laborers or mechanics, including
helpers, which is not listed in the wage determination and which is to be employed under the
contract shall be classified in conformance with the wage determination. The contracting officer
shall approve an additional classification and wage rate and fringe benefits therefore only when
the following criteria have been met:
(1) Except with respect to helpers as defined as 29 CFR 5.2(n)(4), the work to be performed by
the classification requested is not performed by a classification in the wage determination; and
(2) The classification is utilized in the area by the construction industry; and
(3) The proposed wage rate, including any bona fide fringe benefits, bears a reasonable
relationship to the wage rates contained in the wage determination; and
(4) With respect to helpers as defined in 29 CFR 5.2(n)(4), such a classification prevails in the
area in which the work is performed.
(B) If the contractor and the laborers and mechanics to be employed in the classification (if
known), or their representatives, and the contracting officer agree on the classification and wage
rate (including the amount designated for fringe benefits where appropriate), a report of the
action taken shall be sent by the contracting officer to the Administrator of the Wage and Hour
Division, Employment Standards Administration, U.S. Department of Labor, Washington, DC
20210. The Administrator, or an authorized representative, will approve, modify, or disapprove
every additional classification action within 30 days of receipt and so advise the contracting
officer or will notify the contracting officer within the 30-day period that additional time is
necessary.
(C) In the event the contractor, the laborers or mechanics to be employed in the classification or
their representatives, and the contracting officer do not agree on the proposed classification and
wage rate (including the amount designated for fringe benefits, where appropriate), the
contracting officer shall refer the questions, including the views of all interested parties and the
recommendation of the contracting officer, to the Administrator for determination. The
Administrator, or an authorized representative, will issue a determination within 30 days of
receipt and so advise the contracting officer or will notify the contracting officer within the 30-
day period that additional time is necessary.
(D) The wage rate (including fringe benefits where appropriate) determined pursuant to
paragraphs (a)(1)(ii) (B) or (C) of this section, shall be paid to all workers performing work in
Professional Services Agreement —January, 2005
26
Best Practices Procurement Manual — Appendix A.1 Page 27
the classification under this contract from the first day on which work is performed in the
classification.
(iii) Whenever the minimum wage rate prescribed in the contract for a class of laborers or
mechanics includes a fringe benefit which is not expressed as an hourly rate, the contractor shall
either pay the benefit as stated in the wage determination or shall pay another bona fide fringe
benefit or an hourly cash equivalent thereof.
(iv) If the contractor does not make payments to a trustee or other third person, the contractor
may consider as part of the wages of any laborer or mechanic the amount of any costs reasonably
anticipated in providing bona fide fringe benefits under a plan or program, Provided, That the
Secretary of Labor has found, upon the written request of the contractor, that the applicable
standards of the Davis -Bacon Act have been met. The Secretary of Labor may require the
contractor to set aside in a separate account assets for the meeting of obligations under the plan
or program.
(v)(A) The contracting officer shall require that any class of laborers or mechanics which is not
listed in the wage determination and which is to be employed under the contract shall be
classified in conformance with the wage determination. The contracting officer shall approve an
additional classification and wage rate and fringe benefits therefor only when the following
criteria have been met:
(1) The work to be performed by the classification requested is not performed by a classification
in the wage determination; and
(2) The classification is utilized in the area by the construction industry; and
(3) The proposed wage rate, including any bona fide fringe benefits, bears a reasonable
relationship to the wage rates contained in the wage determination.
(B) If the contractor and the laborers and mechanics to be employed in the classification (if
known), or their representatives, and the contracting officer agree on the classification and wage
rate (including the amount designated for fringe benefits where appropriate), a report of the
action taken shall be sent by the contracting officer to the Administrator of the Wage and Hour
Division, Employment Standards Administration, Washington, DC 20210. The Administrator,
or an authorized representative, will approve, modify, or disapprove every additional
classification action within 30 days of receipt and so advise the contracting officer or will notify
the contracting officer within the 30-day period that additional time is necessary.
(C) In the event the contractor, the laborers or mechanics to be employed in the classification or
their representatives, and the contracting officer do not agree on the proposed classification and
Professional Services Agreement —January, 2005
27
Best Practices Procurement Manual — Appendix A.1 Pa a 28
wage rate (including the amount designated for fringe benefits, where appropriate), the
contracting officer shall refer the questions, including the views of all interested parties and the
recommendation of the contracting officer, to the Administrator for determination. The
Administrator, or an authorized representative, will issue a determination with 30 days of receipt
and so advise the contracting officer or will notify the contracting officer within the 30-day
period that additional time is necessary.
(D) The wage rate (including fringe benefits where appropriate) determined pursuant to
paragraphs (a)(1)(v) (B) or (C) of this section, shall be paid to all workers performing work in
the classification under this contract from the first day on which work is performed in the
classification.
(2) Withholding - The [ insert name of grantee ] shall upon its own action or upon written
request of an authorized representative of the Department of Labor withhold or cause to be
withheld from the contractor under this contract or any other Federal contract with the same
prime contractor, or any other federally -assisted contract subject to Davis -Bacon prevailing wage
requirements, which is held by the same prime contractor, so much of the accrued payments or
advances as may be considered necessary to pay laborers and mechanics, including apprentices,
trainees, and helpers, employed by the contractor or any subcontractor the full amount of wages
required by the contract. In the event of failure to pay any laborer or mechanic, including any
apprentice, trainee, or helper, employed or working on the site of the work (or under the United
States Housing Act of 1937 or under the Housing Act of 1949 in the construction or development
of the project), all or part of the wages required by the contract, the [ insert name of grantee ]
may, after written notice to the contractor, sponsor, applicant, or owner, take such action as may
be necessary to cause the suspension of any further payment, advance, or guarantee of funds
until such violations have ceased.
(3) Payrolls and basic records - (i) Payrolls and basic records relating thereto shall be
maintained by the contractor during the course of the work and preserved for a period of three
years thereafter for all laborers and mechanics working at the site of the work (or under the
United States Housing Act of 1937, or under the Housing Act of 1949, in the construction or
development of the project). Such records shall contain the name, address, and social security
number of each such worker, his or her correct classification, hourly rates of wages paid
(including rates of contributions or costs anticipated for bona fide fringe benefits or cash
equivalents thereof of the types described in section I (b)(2)(B) of the Davis -Bacon Act), daily
and weekly number of hours worked, deductions made and actual wages paid. Whenever the
Secretary of Labor has found under 29 CFR 5.5(a)(1)(iv) that the wages of any laborer or
mechanic include the amount of any costs reasonably anticipated in providing benefits under a
plan or program described in section I (b)(2)(B) of the Davis -Bacon Act, the contractor shall
maintain records which show that the commitment to provide such benefits is enforceable, that
the plan or program is financially responsible, and that the plan or program has been
Professional Services Agreement —January, 2005
28
IV. Review and Assessment
Professional firms will be evaluated on the following criteria. These criteria will be the basis for
review of the written proposals and interview session.
The rating scale shall be from 1 to 5, with 1 being a poor rating, 3 being an average rating, and
5 being an outstanding rating.
WEIGHTING
QUALIFICATION
STANDARD
FACTOR
3.0
Scope of Proposal
Does the proposal show an understanding of the
project objective, methodology to be used and
results that are desired from the project?
2.0
Assigned Personnel
Do the persons who will be working on the project
have the necessary skills? Are sufficient people of
the requisite skills assigned to the project?
1.0
Availability
Can the work be completed in the necessary time?
Can the target start and completion dates be met?
Are other qualified personnel available to assist in
meeting the project schedule if required? Is the
project team available to attend meetings as
required by the Scope of Work?
1.0
Motivation
Is the firm interested and are they capable of doing
the work in the required time frame?
2.0
Firm Capability
Does the firm have the support capabilities the
assigned personnel require? Has the firm done
previous projects of this type and scope?
2.0
Cost and
Do the proposed cost and work hours compare
Work Hours
favorably with the project Manager's estimate? Are
the work hours presented reasonable for the effort
required in each project task or phase?
1.0
UDBE
Is the primary firm a UDBE or has the primary
firm submitted UDBE participation that meets or
exceeds UDBE goal for the project?
2/9/00
Best Practices Procurement Manual — Appendix A 1 Paee 29
communicated in writing to the laborers or mechanics affected, and records which show the costs
anticipated or the actual cost incurred in providing such benefits. Contractors employing
apprentices or trainees under approved programs shall maintain written evidence of the
registration of apprenticeship programs and certification of trainee programs, the registration of
the apprentices and trainees, and the ratios and wage rates prescribed in the applicable programs.
(ii)(A) The contractor shall submit weekly for each week in which any contract work is
performed a copy of all payrolls to the [ insert name of grantee ] for transmission to the Federal
Transit Administration. The payrolls submitted shall set out accurately and completely all of the
information required to be maintained under section 5.5(a)(3)(i) of Regulations, 29 CFR part 5.
This information may be submitted in any form desired. Optional Form WH-347 is available for
this purpose and may be purchased from the Superintendent of Documents (Federal Stock
Number 029-005-00014-1), U.S. Government Printing Office, Washington, DC 20402. The
prime contractor is responsible for the submission of copies of payrolls by all subcontractors.
(B) Each payroll submitted shall be accompanied by a "Statement of Compliance," signed by the
contractor or subcontractor or his or her agent who pays or supervises the payment of the persons
employed under the contract and shall certify the following:
(1) That the payroll for the payroll period contains the information required to be maintained
under section 5.5(a)(3)(i) of Regulations, 29 CFR part 5 and that such information is correct and
complete;
(2) That each laborer or mechanic (including each helper, apprentice, and trainee) employed on
the contract during the payroll period has been paid the full weekly wages earned, without
rebate, either directly or indirectly, and that no deductions have been made either directly or
indirectly from the full wages earned, other than permissible deductions as set forth in
Regulations, 29 CFR part 3;
(3) That each laborer or mechanic has been paid not less than the applicable wage rates and
fringe benefits or cash equivalents for the classification of work performed, as specified in the
applicable wage determination incorporated into the contract.
(C) The weekly submission of a properly executed certification set forth on the reverse side of
Optional Form WH-347 shall satisfy the requirement for submission of the "Statement of
Compliance" required by paragraph (a)(3)(ii)(B) of this section.
(D) The falsification of any of the above certifications may subject the contractor or
subcontractor to civil or criminal prosecution under section 1001 of title 18 and section 231 of
title 31 of the United States Code.
Professional Services Agreement —January, 2005
29
Best Practices Procurement Manual — Appendix A 1 Page 30
(iii) The contractor or subcontractor shall make the records required under paragraph (a)(3)(i) of
this section available for inspection, copying, or transcription by authorized representatives of
the Federal Transit Administration or the Department of Labor, and shall permit such
representatives to interview employees during working hours on the job. If the contractor or
subcontractor fails to submit the required records or to make them available, the Federal agency
may, after written notice to the contractor, sponsor, applicant, or owner, take such action as may
be necessary to cause the suspension of any further payment, advance, or guarantee of funds.
Furthermore, failure to submit the required records upon request or to make such records
available may be grounds for debarment action pursuant to 29 CFR 5.12.
(4) Apprentices and trainees - (i) Apprentices - Apprentices will be permitted to work at less
than the predetermined rate for the work they performed when they are employed pursuant to
and individually registered in a bona fide apprenticeship program registered with the U.S.
Department of Labor, Employment and Training Administration, Bureau of Apprenticeship and
Training, or with a State Apprenticeship Agency recognized by the Bureau, or if a person is
employed in his or her first 90 days of probationary employment as an apprentice in such an
apprenticeship program, who is not individually registered in the program, but who has been
certified by the Bureau of Apprenticeship and Training or a State Apprenticeship Agency (where
appropriate) to be eligible for probationary employment as an apprentice. The allowable ratio of
apprentices to journeymen on the job site in any craft classification shall not be greater than the
ratio permitted to the contractor as to the entire work force under the registered program. Any
worker listed on a payroll at an apprentice wage rate, who is not registered or otherwise
employed as stated above, shall be paid not less than the applicable wage rate on the wage
determination for the classification of work actually performed. In addition, any apprentice
performing work on the job site in excess of the ratio permitted under the registered program
shall be paid not less than the applicable wage rate on the wage determination for the work
actually performed. Where a contractor is performing construction on a project in a locality
other than that in which its program is registered, the ratios and wage rates (expressed in
percentages of the journeyman's hourly rate) specified in the contractor's or subcontractor's
registered program shall be observed. Every apprentice must be paid at not less than the rate
specified in the registered program for the apprentice's level of progress, expressed as a
percentage of the journeymen hourly rate specified in the applicable wage determination.
Apprentices shall be paid fringe benefits in accordance with the provisions of the apprenticeship
program. If the apprenticeship program does not specify fringe benefits, apprentices must be
paid the full amount of fringe benefits listed on the wage determination for the applicable
classification. If the Administrator of the Wage and Hour Division of the U.S. Department of
Labor determines that a different practice prevails for the applicable apprentice classification,
fringes shall be paid in accordance with that determination. In the event the Bureau of
Apprenticeship and Training, or a State Apprenticeship Agency recognized by the Bureau,
withdraws approval of an apprenticeship program, the contractor will no longer be permitted to
utilize apprentices at less than the applicable predetermined rate for the work performed until an
Professional Services Agreement January, 2005
30
Best Practices Procurement Manual — Appendix A 1 Page 31
acceptable program is approved.
(ii) Trainees - Except as provided in 29 CFR 5.16, trainees will not be permitted to work at less
than the predetermined rate for the work performed unless they are employed pursuant to and
individually registered in a program which has received prior approval, evidenced by formal
certification by the U.S. Department of Labor, Employment and Training Administration. The
ratio of trainees to journeymen on the job site shall not be greater than permitted under the plan
approved by the Employment and Training Administration. Every trainee must be paid at not
less than the rate specified in the approved program for the trainee's level of progress, expressed
as a percentage of the journeyman hourly rate specified in the applicable wage determination.
Trainees shall be paid fringe benefits in accordance with the provisions of the trainee program.
If the trainee program does not mention fringe benefits, trainees shall be paid the full amount of
fringe benefits listed on the wage determination unless the Administrator of the Wage and Hour
Division determines that there is an apprenticeship program associated with the corresponding
journeyman wage rate on the wage determination which provides for less than full fringe benefits
for apprentices. Any employee listed on the payroll at a trainee rate who is not registered and
participating in a training plan approved by the Employment and Training Administration shall
be paid not less than the applicable wage rate on the wage determination for the classification of
work actually performed. In addition, any trainee performing work on the job site in excess of
the ratio permitted under the registered program shall be paid not less than the applicable wage
rate on the wage determination for the work actually performed. In the event the Employment
and Training Administration withdraws approval of a training program, the contractor will no
longer be permitted to utilize trainees at less than the applicable predetermined rate for the work
performed until an acceptable program is approved.
(iii) Equal employment opportunity - The utilization of apprentices, trainees and journeymen
under this part shall be in conformity with the equal employment opportunity requirements of
Executive Order 11246, as amended, and 29 CFR part 30.
(5) Compliance with Copeland Act requirements - The contractor shall comply with the
requirements of 29 CFR part 3, which are incorporated by reference in this contract.
(6) Subcontracts - The contractor or subcontractor shall insert in any subcontracts the clauses
contained in 29 CFR 5.5(a)(1) through (10) and such other clauses as the Federal Transit
Administration may by appropriate instructions require, and also a clause requiring the
subcontractors to include these clauses in any lower tier subcontracts. The prime contractor shall
be responsible for the compliance by any subcontractor or lower tier subcontractor with all the
contract clauses in 29 CFR 5.5.
(7) Contract termination: debarment - A breach of the contract clauses in 29 CFR 5.5 may be
grounds for termination of the contract, and for debarment as a contractor and a subcontractor as
provided in 29 CFR 5.12.
Professional Services Agreement —January, 2005
31
Best Practices Procurement Manual — Appendix A.1 Paee 32
(8) Compliance with Davis -Bacon and Related Act requirements - All rulings and
interpretations of the Davis -Bacon and Related Acts contained in 29 CFR parts 1, 3, and 5 are
herein incorporated by reference in this contract.
(9) Disputes concerning labor standards - Disputes arising out of the labor standards
provisions of this contract shall not be subject to the general disputes clause of this contract.
Such disputes shall be resolved in accordance with the procedures of the Department of Labor
set forth in 29 CFR parts 5, 6, and 7. Disputes within the meaning of this clause include disputes
between the contractor (or any of its subcontractors) and the contracting agency, the U.S.
Department of Labor, or the employees or their representatives.
(10) Certification of eligibility - (i) By entering into this contract, the contractor certifies that
neither it (nor he or she) nor any person or firm who has an interest in the contractor's firm is a
person or firm ineligible to be awarded Government contracts by virtue of section 3(a) of the
Davis -Bacon Act or 29 CFR 5.12(a)(1).
(ii) No part of this contract shall be subcontracted to any person or firm ineligible for award of a
Government contract by virtue of section 3(a) of the Davis -Bacon Act or 29 CFR 5.12(a)(1).
(iii) The penalty for making false statements is prescribed in the U.S. Criminal Code, 18 U.S.C.
1001.
Professional Services Agreement —January, 2005
32
Best Practices Procurement Manual — Appendix A 1 P. 33
17. CONTRACT WORK HOURS AND SAFETY STANDARDS ACT
Background and Application
The Contract Work Hours and Safety Standards Act is codified at 40 USC 3701, et seq. The Act
applies to grantee contracts and subcontracts "financed at least in part by loans or grants from ...
the [Federal] Government." 40 USC 3701(b)(1)(B)(iii) and (b)(2), 29 CFR 5.2(h), 49 CFR
18.36(i)(6). Although the original Act required its application in any construction contract over
$2,000 or non -construction contract to which the Act applied over $2,500 (and language to that
effect is still found in 49 CFR 18.36(i)(6)), the Act no longer applies to any "contract in an
amount that is not greater than $100,000." 40 USC 3701(b)(3) (A)(iii).
The Act applies to construction contracts and, in very limited circumstances, non -construction
projects that employ "laborers or mechanics on a public work." These non -construction
applications do not generally apply to transit procurements because transit procurements (to
include rail cars and buses) are deemed "commercial items." 40 USC 37071 41 USC 403 (12).
A grantee that contemplates entering into a contract to procure a developmental or unique item
should consult counsel to determine if the Act applies to that procurement and that additional
language required by 29 CFR 5.5(c) must be added to the basic clause below.
The clause language is drawn directly from 29 CFR 5.5(b) and any deviation from the model
clause below should be coordinated with counsel to ensure the Act's requirements are satisfied.
Clause Language
Contract Work Hours and Safety Standards
(1) Overtime requirements - No contractor or subcontractor contracting for any part of the
contract work which may require or involve the employment of laborers or mechanics shall
require or permit any such laborer or mechanic in any workweek in which he or she is employed
on such work to work in excess of forty hours in such workweek unless such laborer or mechanic
receives compensation at a rate not less than one and one-half times the basic rate of pay for all
hours worked in excess of forty hours in such workweek.
(2) Violation; liability for unpaid wages; liquidated damages - In the event of any violation of
the clause set forth in paragraph (1) of this section the contractor and any subcontractor
responsible therefor shall be liable for the unpaid wages. In addition, such contractor and
subcontractor shall be liable to the United States for liquidated damages. Such liquidated
damages shall be computed with respect to each individual laborer or mechanic, including
watchmen and guards, employed in violation of the clause set forth in paragraph (1) of this
section, in the sum of $10 for each calendar day on which such individual was required or
permitted to work in excess of the standard workweek of forty hours without payment of the
Professional Services Agreement —January, 2005
33
Best Practices Procurement Manual — Appendix A.1 Paee 34
overtime wages required by the clause set forth in paragraph (1) of this section.
(3) Withholding for unpaid wages and liquidated damages - The (write in the name of the
grantee) shall upon its own action or upon written request of an authorized representative of the
Department of Labor withhold or cause to be withheld, from any moneys payable on account of
work performed by the contractor or subcontractor under any such contract or any other Federal
contract with the same prime contractor, or any other federally -assisted contract subject to the
Contract Work Hours and Safety Standards Act, which is held by the same prime contractor,
such sums as may be determined to be necessary to satisfy any liabilities of such contractor or
subcontractor for unpaid wages and liquidated damages as provided in the clause set forth in
paragraph (2) of this section.
(4) Subcontracts - The contractor or subcontractor shall insert in any subcontracts the clauses
set forth in paragraphs (1) through (4) of this section and also a clause requiring the
subcontractors to include these clauses in any lower tier subcontracts. The prime contractor shall
be responsible for compliance by any subcontractor or lower tier subcontractor with the clauses
set forth in paragraphs (1) through (4) of this section.
18. [RESERVED 1
19. NO GOVERNMENT OBLIGATION TO THIRD PARTIES
Applicability to Contracts
Applicable to all contracts.
Flow Down
Not required by statute or regulation for either primary contractors or subcontractors, this
concept should flow down to all levels to clarify, to all parties to the contract, that the Federal
Government does not have contractual liability to third parties, absent specific written consent.
Model Clause/Language
While no specific language is required, FTA has developed the following language.
No Obligation by the Federal Government.
(1) The Purchaser and Contractor acknowledge and agree that, notwithstanding any concurrence
by the Federal Government in or approval of the solicitation or award of the underlying contract,
absent the express written consent by the Federal Government, the Federal Government is not a
party to this contract and shall not be subject to any obligations or liabilities to the Purchaser,
Professional Services Agreement —January, 2005
34
Best Practices Procurement Manual — Appendix A 1 Paee 35
Contractor, or any other party (whether or not a party to that contract) pertaining to any matter
resulting from the underlying contract.
(2) The Contractor agrees to include the above clause in each subcontract financed in whole or in
part with Federal assistance provided by FTA. It is further agreed that the clause shall not be
modified, except to identify the subcontractor who will be subject to its provisions.
20. PROGRAM FRAUD AND FALSE OR FRAUDULENT STATEMENTS
AND RELATED ACTS
31 U.S.C. 3801 et seq.
49 CFR Part 31 18 U.S.C. 1001
49 U.S.C. 5307
Applicability to Contracts
These requirements are applicable to all contracts.
Flow Down
These requirements flow down to contractors and subcontractors who make, present, or submit
covered claims and statements.
Model Clause/Language
These requirements have no specified language, so FTA proffers the following language.
Program Fraud and False or Fraudulent Statements or Related Acts.
(1) The Contractor acknowledges that the provisions of the Program Fraud Civil Remedies Act
of 1986, as amended, 31 U.S.C. § 3801 et seq. and U.S. DOT regulations, "Program Fraud Civil
Remedies," 49 C.F.R. Part 31, apply to its actions pertaining to this Project. Upon execution of
the underlying contract, the Contractor certifies or affirms the truthfulness and accuracy of any
statement it has made, it makes, it may make, or causes to be made, pertaining to the underlying
contract or the FTA assisted project for which this contract work is being performed. In addition
to other penalties that may be applicable, the Contractor further acknowledges that if it makes, or
causes to be made, a false, fictitious, or fraudulent claim, statement, submission, or certification,
the Federal Government reserves the right to impose the penalties of the Program Fraud Civil
Remedies Act of 1986 on the Contractor to the extent the Federal Government deems
appropriate.
(2) The Contractor also acknowledges that if it makes, or causes to be made, a false, fictitious, or
fraudulent claim, statement, submission, or certification to the Federal Government under a
contract connected with a project that is financed in whole or in part with Federal assistance
Professional Services Agreement —January, 2005
35
Best Practices Procurement Manual — Appendix A.1 Page 36
originally awarded by FTA under the authority of 49 U.S.C. § 5307, the Government reserves
the right to impose the penalties of 18 U.S.C. § 1001 and 49 U.S.C. § 5307(n)(1) on the
Contractor, to the extent the Federal Government deems appropriate.
(3) The Contractor agrees to include the above two clauses in each subcontract financed in whole
or in part with Federal assistance provided by FTA. It is further agreed that the clauses shall not
be modified, except to identify the subcontractor who will be subject to the provisions.
21. TERMINATION
49 U.S.C. Part 18
FTA Circular 4220.1E
Applicability to Contracts
All contracts (with the exception of contracts with nonprofit organizations and institutions of
higher education,) in excess of $10,000 shall contain suitable provisions for termination by the
grantee including the manner by which it will be effected and the basis for settlement. (For
contracts with nonprofit organizations and institutions of higher education the threshold is
$100,000.) In addition, such contracts shall describe conditions under which the contract may be
terminated for default as well as conditions where the contract may be terminated because of
circumstances beyond the control of the contractor.
Flow Down
The termination requirements flow down to all contracts in excess of $10,000, with the exception
of contracts with nonprofit organizations and institutions of higher learning.
Model Clause/Language
FTA does not prescribe the form or content of such clauses. The following are suggestions of
clauses to be used in different types of contracts:
a. Termination for Convenience (General Provision) The (Recipient) may terminate this
contract, in whole or in part, at any time by written notice to the Contractor when it is in the
Government's best interest. The Contractor shall be paid its costs, including contract close-out
costs, and profit on work performed up to the time of termination. The Contractor shall promptly
submit its termination claim to (Recipient) to be paid the Contractor. If the Contractor has any
property in its possession belonging to the (Recipient), the Contractor will account for the same,
and dispose of it in the manner the (Recipient) directs.
b. Termination for Default [Breach or Cause] (General Provision) If the Contractor does not
deliver supplies in accordance with the contract delivery schedule, or, if the contract is for
services, the Contractor fails to perform in the manner called for in the contract, or if the
Professional Services Agreement —January, 2005
36
Best Practices Procurement Manual — Appendix A.1 Page 37
Contractor fails to comply with any other provisions of the contract, the (Recipient) may
terminate this contract for default. Termination shall be effected by serving a notice of
termination on the contractor setting forth the manner in which the Contractor is in default. The
contractor will only be paid the contract price for supplies delivered and accepted, or services
performed in accordance with the manner of performance set forth in the contract.
If it is later determined by the (Recipient) that the Contractor had an excusable reason for not
performing, such as a strike, fire, or flood, events which are not the fault of or are beyond the
control of the Contractor, the (Recipient), after setting up a new delivery of performance
schedule, may allow the Contractor to continue work, or treat the termination as a termination for
convenience.
c. Opportunity to Cure (General Provision) The (Recipient) in its sole discretion may, in the
case of a termination for breach or default, allow the Contractor [an appropriately short period of
time] in which to cure the defect. In such case, the notice of termination will state the time
period in which cure is pennitted and other appropriate conditions
If Contractor fails to remedy to (Recipient)'s satisfaction the breach or default of any of the
terms, covenants, or conditions of this Contract within [ten (10) days] after receipt by Contractor
of written notice from (Recipient) setting forth the nature of said breach or default, (Recipient)
shall have the right to terminate the Contract without any further obligation to Contractor. Any
such termination for default shall not in any way operate to preclude (Recipient) from also
pursuing all available remedies against Contractor and its sureties for said breach or default.
d. Waiver of Remedies for any Breach In the event that (Recipient) elects to waive its
remedies for any breach by Contractor of any covenant, term or condition of this Contract, such
waiver by (Recipient) shall not limit (Recipient)'s remedies for any succeeding breach of that or
of any other term, covenant, or condition of this Contract.
e. Termination for Convenience (Professional or Transit Service Contracts) The
(Recipient), by written notice, may terminate this contract, in whole or in part, when it is in the
Government's interest. If this contract is terminated, the Recipient shall be liable only for
payment under the payment provisions of this contract for services rendered before the effective
date of termination.
f. Termination for Default (Supplies and Service) If the Contractor fails to deliver supplies or
to perform the services within the time specified in this contract or any extension or if the
Contractor fails to comply with any other provisions of this contract, the (Recipient) may
terminate this contract for default. The (Recipient) shall terminate by delivering to the
Contractor a Notice of Termination specifying the nature of the default. The Contractor will
only be paid the contract price for supplies delivered and accepted, or services performed in
accordance with the manner or performance set forth in this contract.
Professional Services Agreement —January, 2005
37
Best Practices Procurement Manual — Appendix A 1 Page 38
If, after termination for failure to fulfill contract obligations, it is determined that the Contractor
was not in default, the rights and obligations of the parties shall be the same as if the termination
had been issued for the convenience of the Recipient.
g. Termination for Default (Transportation Services) If the Contractor fails to pick up the
commodities or to perform the services, including delivery services, within the time specified in
this contract or any extension or if the Contractor fails to comply with any other provisions of
this contract, the (Recipient) may terminate this contract for default. The (Recipient) shall
terminate by delivering to the Contractor a Notice of Termination specifying the nature of
default. The Contractor will only be paid the contract price for services performed in accordance
with the manner of performance set forth in this contract.
If this contract is terminated while the Contractor has possession of Recipient goods, the
Contractor shall, upon direction of the (Recipient), protect and preserve the goods until
surrendered to the Recipient or its agent. The Contractor and (Recipient) shall agree on payment
for the preservation and protection of goods. Failure to agree on an amount will be resolved
under the Dispute clause.
If, after termination for failure to fulfill contract obligations, it is determined that the Contractor
was not in default, the rights and obligations of the parties shall be the same as if the termination
had been issued for the convenience of the (Recipient).
h. Termination for Default (Construction) If the Contractor refuses or fails to prosecute the
work or any separable part, with the diligence that will insure its completion within the time
specified in this contract or any extension or fails to complete the work within this time, or if the
Contractor fails to comply with any other provisions of this contract, the (Recipient) may
terminate this contract for default. The (Recipient) shall terminate by delivering to the
Contractor a Notice of Termination specifying the nature of the default. In this event, the
Recipient may take over the work and compete it by contract or otherwise, and may take
possession of and use any materials, appliances, and plant on the work site necessary for
completing the work. The Contractor and its sureties shall be liable for any damage to the
Recipient resulting from the Contractor's refusal or failure to complete the work within specified
time, whether or not the Contractor's right to proceed with the work is terminated. This liability
includes any increased costs incurred by the Recipient in completing the work.
The Contractor's right to proceed shall not be terminated nor the Contractor charged with
damages under this clause if-
1. the delay in completing the work arises from unforeseeable causes beyond the control and
without the fault or negligence of the Contractor. Examples of such causes include: acts of God,
Professional Services Agreement —January, 2005
38
Reference evaluation (Top Ranked Firm)
The project Manager will check references using the following criteria. The evaluation rankings
will be labeled Satisfactory/Unsatisfactory.
QUALIFICATION
STANDARD
Overall Performance
Would you hire this Professional again? Did
they show the skills required by this project?
Timetable
Was the original Scope of Work completed
within the specified time? Were interim
deadlines met in a timely manner?
Completeness
Was the Professional responsive to client
needs; did the Professional anticipate
problems? Were problems solved quickly and
effectively?
Budget
Was the original Scope of Work completed
within the project budget?
Job Knowledge
a) If a study, did it meet the Scope of Work?
b) If Professional administered a construction
contract, was the project functional upon
completion and did it operate properly?
Were problems corrected quickly and
effectively?
2/9/00
Best Practices Procurement Manual — Appendix A 1 Page 39
acts of the Recipient, acts of another Contractor in the performance of a contract with the
Recipient, epidemics, quarantine restrictions, strikes, freight embargoes; and
2. the contractor, within [10] days from the beginning of any delay, notifies the (Recipient) in
writing of the causes of delay. If in the judgment of the (Recipient), the delay is excusable, the
time for completing the work shall be extended. The judgment of the (Recipient) shall be final
and conclusive on the parties, but subject to appeal under the Disputes clauses.
If, after termination of the Contractor's right to proceed, it is determined that the Contractor was
not in default, or that the delay was excusable, the rights and obligations of the parties will be the
same as if the termination had been issued for the convenience of the Recipient.
i. Termination for Convenience or Default (Architect and Engineering) The (Recipient)
may terminate this contract in whole or in part, for the Recipient's convenience or because of the
failure of the Contractor to fulfill the contract obligations. The (Recipient) shall terminate by
delivering to the Contractor a Notice of Termination specifying the nature, extent, and effective
date of the termination. Upon receipt of the notice, the Contractor shall (1) immediately
discontinue all services affected (unless the notice directs otherwise), and (2) deliver to the
Contracting Officer all data, drawings, specifications, reports, estimates, summaries, and other
information and materials accumulated in performing this contract, whether completed or in
process.
If the termination is for the convenience of the Recipient, the Contracting Officer shall make an
equitable adjustment in the contract price but shall allow no anticipated profit on unperformed
services.
If the termination is for failure of the Contractor to fulfill the contract obligations, the Recipient
may complete the work by contact or otherwise and the Contractor shall be liable for any
additional cost incurred by the Recipient.
If, after termination for failure to fulfill contract obligations, it is determined that the Contractor
was not in default, the rights and obligations of the parties shall be the same as if the termination
had been issued for the convenience of the Recipient.
j. Termination for Convenience of Default (Cost -Type Contracts) The (Recipient) may
terminate this contract, or any portion of it, by serving a notice or termination on the Contractor.
The notice shall state whether the termination is for convenience of the (Recipient) or for the
default of the Contractor. If the termination is for default, the notice shall state the manner in
which the contractor has failed to perform the requirements of the contract. The Contractor shall
account for any property in its possession paid for from funds received from the (Recipient), or
property supplied to the Contractor by the (Recipient). If the termination is for default, the
(Recipient) may fix the fee, if the contract provides for a fee, to be paid the contractor in
Professional Services Agreement —January, 2005
39
Best Practices Procurement Manual — Appendix A I P. 40
proportion to the value, if any, of work performed up to the time of termination. The Contractor
shall promptly submit its termination claim to the (Recipient) and the parties shall negotiate the
termination settlement to be paid the Contractor.
If the termination is for the convenience of the (Recipient), the Contractor shall be paid its
contract close-out costs, and a fee, if the contract provided for payment of a fee, in proportion to
the work performed up to the time of termination.
If, after serving a notice of termination for default, the (Recipient) determines that the Contractor
has an excusable reason for not performing, such as strike, fire, flood, events which are not the
fault of and are beyond the control of the contractor, the (Recipient), after setting up a new work
schedule, may allow the Contractor to continue work, or treat the termination as a termination for
convenience.
22. GOVERNMENT -WIDE DEBARMENT AND SUSPENSION (NONPROCUREMENT)
Background and Applicability
In conjunction with the Office of Management and Budget and other affected Federal agencies,
DOT published an update to 49 CFR Part 29 on November 26, 2003. This government -wide
regulation implements Executive Order 12549, Debarment and Suspension, Executive Order
12689, Debarment and Suspension, and 31 U.S.C. 6101 note (Section 2455, Public Law 103-
355, 108 Stat. 3327).
The provisions of Part 29 apply to all grantee contracts and subcontracts at any level expected to
equal or exceed $25,000 as well as any contract or subcontract (at any level) for Federally
required auditing services. 49 CFR 29.220(b). This represents a change from prior practice in
that the dollar threshold for application of these rules has been lowered from $100,000 to
$25,000. These are contracts and subcontracts referred to in the regulation as "covered
transactions."
Grantees, contractors, and subcontractors (at any level) that enter into covered transactions are
required to verify that the entity (as well as its principals and affiliates) they propose to contract
or subcontract with is not excluded or disqualified. They do this by (a) Checking the Excluded
Parties List System, (b) Collecting a certification from that person, or (c) Adding a clause or
condition to the contract or subcontract. This represents a change from prior practice in that
certification is still acceptable but is no longer required. 49 CFR 29.300.
Grantees, contractors, and subcontractors who enter into covered transactions also must require
the entities they contract with to comply with 49 CFR 29, subpart C and include this requirement
in their own subsequent covered transactions (i.e., the requirement flows down to subcontracts
at all levels).
Professional Services Agreement —January, 2005
40
Best Practices Procurement Manual — Appendix A.1 Page 41
Clause Language
The following clause language is suggested, not mandatory. It incorporates the optional method
of verifying that contractors are not excluded or disqualified by certification.
Suspension and Debarment
This contract is a covered transaction for purposes of 49 CFR Part 29. As such,
the contractor is required to verify that none of the contractor, its principals, as
defined at 49 CFR 29.995, or affiliates, as defined at 49 CFR 29.905, are excluded
or disqualified as defined at 49 CFR 29.940 and 29.945.
The contractor is required to comply with 49 CFR 29, Subpart C and must include
the requirement to comply with 49 CFR 29, Subpart C in any lower tier covered
transaction it enters into.
By signing and submitting its bid or proposal, the bidder or proposer certifies as
follows:
The certification in this clause is a material representation of fact relied upon by
{insert agency name). If it is later determined that the bidder or proposer
knowingly rendered an erroneous certification, in addition to remedies available
to {insert agency name}, the Federal Government may pursue available
remedies, including but not limited to suspension and/or debarment. The bidder
or proposer agrees to comply with the requirements of 49 CFR 29, Subpart C
while this offer is valid and throughout the period of any contract that may arise
from this offer. The bidder or proposer further agrees to include a provision
requiring such compliance in its lower tier covered transactions.
23. PRIVACY ACT
5 U.S.C. 552
Applicability to Contracts
When a grantee maintains files on drug and alcohol enforcement activities for FTA, and those
files are organized so that information could be retrieved by personal identifier, the Privacy Act
requirements apply to all contracts.
Flow Down
The Federal Privacy Act requirements flow down to each third party contractor and their
contracts at every tier.
Professional Services Agreement —January, 2005
41
Best Practices Procurement Manual — Appendix A.1 Page42
Model Clause/Language
The text of the following clause has not been mandated by statute or specific regulation, but has
been developed by FTA.
Contracts Involving Federal Privacy Act Requirements - The following requirements apply
to the Contractor and its employees that administer any system of records on behalf of the
Federal Government under any contract:
(1) The Contractor agrees to comply with, and assures the compliance of its employees with, the
information restrictions and other applicable requirements of the Privacy Act of 1974,
5 U.S.C. § 552a. Among other things, the Contractor agrees to obtain the express consent of the
Federal Government before the Contractor or its employees operate a system of records on
behalf of the Federal Government. The Contractor understands that the requirements of the
Privacy Act, including the civil and criminal penalties for violation of that Act, apply to those
individuals involved, and that failure to comply with the terms of the Privacy Act may result in
termination of the underlying contract.
(2) The Contractor also agrees to include these requirements in each subcontract to administer
any system of records on behalf of the Federal Government financed in whole or in part with
Federal assistance provided by FTA.
24. CIVIL RIGHTS REQUIREMENTS
29 U.S.C. § 623,42 U.S.C. § 2000
42 U.S.C. § 61029 42 U.S.C. § 12112
42 U.S.C. § 121329 49 U.S.C. § 5332
29 CFR Part 1630, 41 CFR Parts 60 et seq.
Applicability to Contracts
The Civil Rights Requirements apply to all contracts.
Flow Down
The Civil Rights requirements flow down to all third party contractors and their contracts at
every tier.
Model Clause/Language
The following clause was predicated on language contained at 49 CFR Part 19, Appendix A, but
FTA has shortened the lengthy text.
Civil Rights - The following requirements apply to the underlying contract:
Professional Services Agreement January, 2005
42
Best Practices Procurement Manual — Appendix A 1 Page 43
(1) Nondiscrimination - In accordance with Title VI of the Civil Rights Act, as amended, 42
U.S.C. § 2000d, section 303 of the Age Discrimination Act of 1975, as amended, 42 U.S.C. §
6102, section 202 of the Americans with Disabilities Act of 1990, 42 U.S.C. § 12132, and
Federal transit law at 49 U.S.C. § 5332, the Contractor agrees that it will not discriminate against
any employee or applicant for employment because of race, color, creed, national origin, sex,
age, or disability. In addition, the Contractor agrees to comply with applicable Federal
implementing regulations and other implementing requirements FTA may issue.
(2) Equal Employment Opportunity - The following equal employment opportunity requirements
apply to the underlying contract:
(a) Race, Color, Creed, National Origin, Sex - In accordance with Title VII of the Civil Rights
Act, as amended, 42 U.S.C. § 2000e, and Federal transit laws at 49 U.S.C. § 5332, the Contractor
agrees to comply with all applicable equal employment opportunity requirements of U.S.
Department of Labor (U.S. DOL) regulations, "Office of Federal Contract Compliance
Programs, Equal Employment Opportunity, Department of Labor," 41 C.F.R. Parts 60 et seg.,
(which implement Executive Order No. 11246, "Equal Employment Opportunity," as amended
by Executive Order No. 11375, "Amending Executive Order 11246 Relating to Equal
Employment Opportunity," 42 U.S.C. § 2000e note), and with any applicable Federal statutes,
executive orders, regulations, and Federal policies that may in the future affect construction
activities undertaken in the course of the Project. The Contractor agrees to take affirmative
action to ensure that applicants are employed, and that employees are treated during
employment, without regard to their race, color, creed, national origin, sex, or age. Such action
shall include, but not be limited to, the following: employment, upgrading, demotion or transfer,
recruitment or recruitment advertising, layoff or termination; rates of pay or other forms of
compensation; and selection for training, including apprenticeship. In addition, the Contractor
agrees to comply with any implementing requirements FTA may issue.
(b) Age - In accordance with section 4 of the Age Discrimination in Employment Act of 1967, as
amended, 29 U.S.C. § § 623 and Federal transit law at 49 U.S.C. § 5332, the Contractor agrees to
refrain from discrimination against present and prospective employees for reason of age. In
addition, the Contractor agrees to comply with any implementing requirements FTA may issue.
(c) Disabilities - In accordance with section 102 of the Americans with Disabilities Act, as
amended, 42 U.S.C. § 12112, the Contractor agrees that it will comply with the requirements of
U.S. Equal Employment Opportunity Commission, "Regulations to Implement the Equal
Employment Provisions of the Americans with Disabilities Act," 29 C.F.R. Part 1630, pertaining
to employment of persons with disabilities. In addition, the Contractor agrees to comply with
any implementing requirements FTA may issue.
Professional Services Agreement —January, 2005
43
Best Practices Procurement Manual — Appendix A I Page 44
(3) The Contractor also agrees to include these requirements in each subcontract financed in
whole or in part with Federal assistance provided by FTA, modified only if necessary to identify
the affected parties.
25. BREACHES AND DISPUTE RESOLUTION
49 CFR Part 18
FTA Circular 4220.1E
Applicability to Contracts
All contracts in excess of $100,000 shall contain provisions or conditions which will allow for
administrative, contractual, or legal remedies in instances where contractors violate or breach
contract terms, and provide for such sanctions and penalties as may be appropriate. This may
include provisions for bonding, penalties for late or inadequate performance, retained earnings,
liquidated damages or other appropriate measures.
Flow Down
The Breaches and Dispute Resolutions requirements flow down to all tiers.
Model Clauses/Language
FTA does not prescribe the form or content of such provisions. What provisions are developed
will depend on the circumstances and the type of contract. Recipients should consult legal
counsel in developing appropriate clauses. The following clauses are examples of provisions
from various FTA third party contracts.
Disputes - Disputes arising in the performance of this Contract which are not resolved by
agreement of the parties shall be decided in writing by the authorized representative of
(Recipient)'s [title of employee]. This decision shall be final and conclusive unless within [ten
(10)] days from the date of receipt of its copy, the Contractor mails or otherwise furnishes a
written appeal to the [title of employee]. In connection with any such appeal, the Contractor
shall be afforded an opportunity to be heard and to offer evidence in support of its position. The
decision of the [title of employee] shall be binding upon the Contractor and the Contractor shall
abide be the decision.
Performance During Dispute - Unless otherwise directed by (Recipient), Contractor shall
continue performance under this Contract while matters in dispute are being resolved.
Claims for Damages - Should either party to the Contract suffer injury or damage to person or
property because of any act or omission of the party or of any of his employees, agents or others
for whose acts he is legally liable, a claim for damages therefor shall be made in writing to such
other party within a reasonable time after the first observance of such injury of damage.
Professional Services Agreement —January, 2005
44
Best Practices Procurement Manual — Appendix A.1 Page 45
Remedies - Unless this contract provides otherwise, all claims, counterclaims, disputes and other
matters in question between the (Recipient) and the Contractor arising out of or relating to this
agreement or its breach will be decided by arbitration if the parties mutually agree, or in a court
of competent jurisdiction within the State in which the (Recipient) is located.
Rights and Remedies - The duties and obligations imposed by the Contract Documents and the
rights and remedies available thereunder shall be in addition to and not a limitation of any duties,
obligations, rights and remedies otherwise imposed or available by law. No action or failure to
act by the (Recipient), (Architect) or Contractor shall constitute a waiver of any right or duty
afforded any of them under the Contract, nor shall any such action or failure to act constitute an
approval of or acquiescence in any breach thereunder, except as may be specifically agreed in
writing.
Professional Services Agreement —January, 2005
45
Best Practices Procurement Manual — Appendix A.1 Page 46
26, PATENT AND RIGHTS IN DATA
37 CFR Part 401
49 CFR Parts 18 and 19
Applicability to Contracts
Patent and rights in data requirements for federally assisted projects ONLY apply to research
projects in which FTA finances the purpose of the grant is to finance the development of a
product or information. These patent and data rights requirements do not apply to capital
projects or operating projects, even though a small portion of the sales price may cover the cost
of product development or writing the user's manual.
Flow Down
The Patent and Rights in Data requirements apply to all contractors and their contracts at every
tier.
Model Clause/Language
The FTA patent clause is substantially similar to the text of 49 C.F.R. Part 19, Appendix A,
Section 5, but the rights in data clause reflects FTA objectives. For patent rights, FTA is
governed by Federal law and regulation. For data rights, the text on copyrights is insufficient to
meet FTA's purposes for awarding research grants. This model clause, with larger rights as a
standard, is proposed with the understanding that this standard could be modified to FTA's
needs.
CONTRACTS INVOLVING EXPERIMENTAL, DEVELOPMENTAL, OR RESEARCH
WORK.
A. Rights in Data - This following requirements apply to each contract involving experimental,
developmental or research work:
(1) The term "subject data" used in this clause means recorded information, whether or not
copyrighted, that is delivered or specified to be delivered under the contract. The term includes
graphic or pictorial delineation in media such as drawings or photographs; text in specifications
or related performance or design -type documents; machine forms such as punched cards,
magnetic tape, or computer memory printouts; and information retained in computer memory.
Examples include, but are not limited to: computer software, engineering drawings and
associated lists, specifications, standards, process sheets, manuals, technical reports, catalog item
identifications, and related information. The term "subject data" does not include financial
reports, cost analyses, and similar information incidental to contract administration.
(2) The following restrictions apply to all subject data first produced in the performance of the
contract to which this Attachment has been added:
Professional Services Agreement —January, 2005
46
Best Practices Procurement Manual — Appendix A 1 Paee 47
(a) Except for its own internal use, the Purchaser or Contractor may not publish or reproduce
subject data in whole or in part, or in any manner or form, nor may the Purchaser or Contractor
authorize others to do so, without the written consent of the Federal Government, until such time
as the Federal Government may have either released or approved the release of such data to the
public; this restriction on publication, however, does not apply to any contract with an academic
institution.
(b) In accordance with 49 C.F.R. § 18.34 and 49 C.F.R. § 19.36, the Federal Government
reserves a royalty -free, non-exclusive and irrevocable license to reproduce, publish, or otherwise
use, and to authorize others to use, for "Federal Government purposes," any subject data or
copyright described in subsections (2)(b)1 and (2)(b)2 of this clause below. As used in the
previous sentence, "for Federal Government purposes," means use only for the direct purposes of
the Federal Government. Without the copyright owner's consent, the Federal Government may
not extend its Federal license to any other party.
1. Any subject data developed under that contract, whether or not a copyright has been obtained;
and
2. Any rights of copyright purchased by the Purchaser or Contractor using Federal assistance in
whole or in part provided by FTA.
(c) When FTA awards Federal assistance for experimental, developmental, or research work, it is
FTA's general intention to increase transportation knowledge available to the public, rather than
to restrict the benefits resulting from the work to participants in that work. Therefore, unless
FTA determines otherwise, the Purchaser and the Contractor performing experimental,
developmental, or research work required by the underlying contract to which this Attachment is
added agrees to permit FTA to make available to the public, either FTA's license in the copyright
to any subject data developed in the course of that contract, or a copy of the subject data first
produced under the contract for which a copyright has not been obtained. If the experimental,
developmental, or research work, which is the subject of the underlying contract, is not
completed for any reason whatsoever, all data developed under that contract shall become
subject data as defined in subsection (a) of this clause and shall be delivered as the Federal
Government may direct. This subsection (c) , however, does not apply to adaptations of
automatic data processing equipment or programs for the Purchaser or Contractor's use whose
costs are financed in whole or in part with Federal assistance provided by FTA for transportation
capital projects.
(d) Unless prohibited by state law, upon request by the Federal Government, the Purchaser and
the Contractor agree to indemnify, save, and hold harmless the Federal Government, its officers,
agents, and employees acting within the scope of their official duties against any liability,
including costs and expenses, resulting from any willful or intentional violation by the Purchaser
or Contractor of proprietary rights, copyrights, or right of privacy, arising out of the publication,
Professional Services Agreement —January, 2005
47
Best Practices Procurement Manual — Appendix A 1 Paee 48
translation, reproduction, delivery, use, or disposition of any data furnished under that contract.
Neither the Purchaser nor the Contractor shall be required to indemnify the Federal Government
for any such liability arising out of the wrongful act of any employee, official, or agents of the
Federal Government.
(e) Nothing contained in this clause on rights in data shall imply a license to the Federal
Government under any patent or be construed as affecting the scope of any license or other right
otherwise granted to the Federal Government under any patent.
(f) Data developed by the Purchaser or Contractor and financed entirely without using Federal
assistance provided by the Federal Government that has been incorporated into work required by
the underlying contract to which this Attachment has been added is exempt from the
requirements of subsections (b), (c), and (d) of this clause, provided that the Purchaser or
Contractor identifies that data in writing at the time of delivery of the contract work.
(g) Unless FTA determines otherwise, the Contractor agrees to include these requirements in
each subcontract for experimental, developmental, or research work financed in whole or in part
with Federal assistance provided by FTA.
(3) Unless the Federal Government later makes a contrary determination in writing, irrespective
of the Contractor's status (i.e., a large business, small business, state government or state
instrumentality, local government, nonprofit organization, institution of higher education,
individual, etc.), the Purchaser and the Contractor agree to take the necessary actions to provide,
through FTA, those rights in that invention due the Federal Government as described in
U.S. Department of Commerce regulations, "Rights to Inventions Made by Nonprofit
Organizations and Small Business Firms Under Government Grants, Contracts and Cooperative
Agreements," 37 C.F.R. Part 401.
(4) The Contractor also agrees to include these requirements in each subcontract for
experimental, developmental, or research work financed in whole or in part with Federal
assistance provided by FTA.
B. Patent Rights - The following requirements apply to each contract involving experimental,
developmental, or research work:
(1) General - If any invention, improvement, or discovery is conceived or first actually reduced
to practice in the course of or under the contract to which this Attachment has been added, and
that invention, improvement, or discovery is patentable under the laws of the United States of
America or any foreign country, the Purchaser and Contractor agree to take actions necessary to
provide immediate notice and a detailed report to the party at a higher tier until FTA is ultimately
notified.
Professional Services Agreement —January, 2005
48
PROFESSIONAL SERVICES AGREEMENT
THIS AGREEMENT made and entered into the day and year set forth below, by and
between THE CITY OF FORT COLLINS, COLORADO, a Municipal Corporation, hereinafter
referred to as the "City" and , [insert either a corporation, a partnership or an individual,
doing business as 1, hereinafter referred to as "Professional'.
WITNESSETH:
In consideration of the mutual covenants and obligations herein expressed, it is agreed
by and between the parties hereto as follows:
1. Scope of Services. The Professional agrees to provide services in accordance
with the scope of services attached hereto as Exhibit "A", consisting of ( ) page[s],
and incorporated herein by this reference.
2. The Work Schedule. [Optional] The services to be performed pursuant to this
Agreement shall be performed in accordance with the Work Schedule attached hereto as
Exhibit "B", consisting of ( ) page[s], and incorporated herein by this reference.
3. Time of Commencement and Completion of Services. The services to be
performed pursuant to this Agreement shall be initiated within ( ) days following
execution of this Agreement. Services shall be completed no later than . Time is of the
essence. Any extensions of the time limit set forth above must be agreed upon in writing by the
parties hereto.
4. Early Termination by City. Notwithstanding the time periods contained herein,
the City may terminate this Agreement at any time without cause by providing written notice of
termination to the Professional. Such notice shall be delivered at least fifteen (15) days prior to
the termination date contained in said notice unless otherwise agreed in writing by the parties.
Professional Services Agreement —January, 2005
6
Best Practices Procurement Manual — Appendix A.1 Page 49
(2) Unless the Federal Government later makes a contrary determination in writing, irrespective
of the Contractor's status (a large business, small business, state government or state
instrumentality, local government, nonprofit organization, institution of higher education,
individual), the Purchaser and the Contractor agree to take the necessary actions to provide,
through FTA, those rights in that invention due the Federal Government as described in U.S.
Department of Commerce regulations, "Rights to Inventions Made by Nonprofit Organizations
and Small Business Firms Under Government Grants, Contracts and Cooperative Agreements,"
37 C.F.R. Part 401.
(3) The Contractor also agrees to include the requirements of this clause in each subcontract for
experimental, developmental, or research work financed in whole or in part with Federal
assistance provided by FTA.
27. TRANSIT EMPLOYEE PROTECTIVE AGREEMENTS
49 U.S.C. § 53109 § 5311, and § 5333
29 CFR Part 215
Applicability to Contracts
The Transit Employee Protective Provisions apply to each contract for transit operations
performed by employees of a Contractor recognized by FTA to be a transit operator. (Because
transit operations involve many activities apart from directly driving or operating transit
vehicles, FTA determines which activities constitute transit "operations" for purposes of this
clause.)
Flow Down
These provisions are applicable to all contracts and subcontracts at every tier.
Model Clause/Language
Since no mandatory language is specified, FTA had developed the following language:
Transit Employee Protective Provisions. (1) The Contractor agrees to the comply with
applicable transit employee protective requirements as follows:
(a) General Transit Employee Protective Requirements - To the extent that FTA determines that
transit operations are involved, the Contractor agrees to carry out the transit operations work on
the underlying contract in compliance with terms and conditions determined by the U.S.
Secretary of Labor to be fair and equitable to protect the interests of employees employed under
this contract and to meet the employee protective requirements of 49 U.S.C. A 5333(b), and U.S.
DOL guidelines at 29 C.F.R. Part 215, and any amendments thereto. These terms and conditions
are identified in the letter of certification from the U.S. DOL to FTA applicable to the FTA
Professional Services Agreement —January, 2005
49
Best Practices Procurement Manual — Appendix A.I Page 50
Recipient's project from which Federal assistance is provided to support work on the underlying
contract. The Contractor agrees to carry out that work in compliance with the conditions stated
in that U.S. DOL letter. The requirements of this subsection (1), however, do not apply to any
contract financed with Federal assistance provided by FTA either for projects for elderly
individuals and individuals with disabilities authorized by 49 U.S.C. § 5310(a)(2), or for projects
for nonurbanized areas authorized by 49 U.S.C. § 5311. Alternate provisions for those projects
are set forth in subsections (b) and (c) of this clause.
(b) Transit Employee Protective Requirements for Projects Authorized by 49 U.S.C.
5310(a)(2)_ for Elderly Individuals and Individuals with Disabilities - If the contract involves
transit operations financed in whole or in part with Federal assistance authorized by 49 U.S.C. §
5310(a)(2), and if the U.S. Secretary of Transportation has determined or determines in the
future that the employee protective requirements of 49 U.S.C. § 5333(b) are necessary or
appropriate for the state and the public body subrecipient for which work is performed on the
underlying contract, the Contractor agrees to carry out the Project in compliance with the terms
and conditions determined by the U.S. Secretary of Labor to meet the requirements of 49 U.S.C.
§ 5333(b), U.S. DOL guidelines at 29 C.F.R. Part 215, and any amendments thereto. These
terms and conditions are identified in the U.S. DOL's letter of certification to FTA, the date of
which is set forth Grant Agreement or Cooperative Agreement with the state. The Contractor
agrees to perform transit operations in connection with the underlying contract in compliance
with the conditions stated in that U.S. DOL letter.
(c) Transit Employee Protective Requirements for Projects Authorized by 49 U.S.C. § 5311 in
Nonurbanized Areas - If the contract involves transit operations financed in whole or in part with
Federal assistance authorized by 49 U.S.C. § 5311, the Contractor agrees to comply with the
terms and conditions of the Special Warranty for the Nonurbanized Area Program agreed to by
the U.S. Secretaries of Transportation and Labor, dated May 31, 1979, and the procedures
implemented by U.S. DOL or any revision thereto.
(2) The Contractor also agrees to include the any applicable requirements in each subcontract
involving transit operations financed in whole or in part with Federal assistance provided by
FTA.
28. DISADVANTAGED BUSINESS ENTERPRISE (DBE)
49 CFR Part 26
Background and Applicability
The newest version on the Department of Transportation's Disadvantaged Business Enterprise
(DBE) program became effective July 16, 2003. The rule provides guidance to grantees on the
use of overall and contract goals, requirement to include DBE provisions in subcontracts,
Professional Services Agreement January, 2005
50
Best Practices Procurement Manual — Appendix A 1 Page 51
evaluating DBE participation where specific contract goals have been set, reporting
requirements, and replacement of DBE subcontractors. Additionally, the DBE program dictates
payment terms and conditions (including limitations on retainage) applicable to all
subcontractors regardless of whether they are DBE firms or not.
The DBE program applies to all DOT -assisted contracting activities. A formal clause such as
that below must be included in all contracts above the micro -purchase level. The requirements
of clause subsection b flow down to subcontracts.
A substantial change to the payment provisions in this newest version of Part 26 concerns
retainage (see section 26.29). Grantee choices concerning retainage should be reflected in the
language choices in clause subsection d.
Clause Language
The following clause language is suggested, not mandatory. It incorporates the payment terms
and conditions applicable to all subcontractors based in Part 26 as well as those related only to
DBE subcontractors. The suggested language allows for the options available to grantees
concerning retainage, specific contract goals, and evaluation of DBE subcontracting participation
when specific contract goals have been established.
Disadvantaged Business Enterprises
a. This contract is subject to the requirements of Title 49, Code of Federal Regulations, Part 26,
Participation by Disadvantaged Business Enterprises in Department of Transportation Financial
Assistance Programs. The national goal for participation of Disadvantaged Business Enterprises
(DBE) is 10%. The agency's overall goal for DBE participation is _ %. A separate contract
goal [of _ % DBE participation has] [has not] been established for this procurement.
b. The contractor shall not discriminate on the basis of race, color, national origin, or sex in the
performance of this contract. The contractor shall carry out applicable requirements of 49 CFR
Part 26 in the award and administration of this DOT -assisted contract. Failure by the contractor
to carry out these requirements is a material breach of this contract, which may result in the
termination of this contract or such other remedy as {insert agency name) deems appropriate.
Each subcontract the contractor signs with a subcontractor must include the assurance in this
paragraph (see 49 CFR 26.13(b)).
c. {If a separate contract goal has been established, use the following} Bidders/offerors are
required to document sufficient DBE participation to meet these goals or, alternatively,
document adequate good faith efforts to do so, as provided for in 49 CFR 26.53. Award of this
contract is conditioned on submission of the following [concurrent with and accompanying
sealed bid] [concurrent with and accompanying an initial proposal] [prior to award]:
Professional Services Agreement —January, 2005
51
Best Practices Procurement Manual — Appendix A. I Page 52
The names and addresses of DBE firms that will participate in this contract;
2. A description of the work each DBE will perform;
3. The dollar amount of the participation of each DBE firm participating;
4. Written documentation of the bidder/offeror's commitment to use a DBE subcontractor
whose participation it submits to meet the contract goal;
5. Written confirmation from the DBE that it is participating in the contract as provided in the
prime contractor's commitment; and
6. If the contract goal is not met, evidence of good faith efforts to do so.
[Bidders][Offerors] must present the information required above [as a matter of
responsiveness] [with initial proposals] [prior to contract award] (see 49 CFR 26.53(3)).
{if no separate contract goal has been established, use the following} The successful
bidder/offeror will be required to report its DBE participation obtained through race -neutral
means throughout the period of performance.
d. The contractor is required to pay its subcontractors performing work related to this contract
for satisfactory performance of that work no later than 30 days after the contractor's receipt of
payment for that work from the {insert agency name]. In addition, [the contractor may not
hold retainage from its subcontractors.] [is required to return any retainage payments to
those subcontractors within 30 days after the subcontractor's work related to this contract
is satisfactorily completed.] [is required to return any retainage payments to those
subcontractors within 30 days after incremental acceptance of the subcontractor's work by
the {insert agency name] and contractor's receipt of the partial retainage payment related
to the subcontractor's work.]
e. The contractor must promptly notify {insert agency name], whenever a DBE subcontractor
performing work related to this contract is terminated or fails to complete its work, and must
make good faith efforts to engage another DBE subcontractor to perform at least the same
amount of work. The contractor may not terminate any DBE subcontractor and perform that
work through its own forces or those of an affiliate without prior written consent of {insert
agency name].
Professional Services Agreement —January, 2005
52
Best Practices Procurement Manual — Appendix A.1 Page 53
29. [RESERVED 1
30. INCORPORATION OF FEDERAL TRANSIT ADMINISTRATION (FTA) TERMS
FTA Circular 4220.1E
Applicability to Contracts
The incorporation of FTA terms applies to all contracts.
Flow Down
The incorporation of FTA terms has unlimited flow down.
Model Clause/Language
FTA has developed the following incorporation of terms language:
Incorporation of Federal Transit Administration (FTA) Terms - The preceding provisions
include, in part, certain Standard Terms and Conditions required by DOT, whether or not
expressly set forth in the preceding contract provisions. All contractual provisions required by
DOT, asset forth in FTA Circular 4220.1 E, are hereby incorporated by reference. Anything to
the contrary herein notwithstanding, all FTA mandated terms shall be deemed to control in the
event of a conflict with other provisions contained in this Agreement. The Contractor shall not
perform any act, fail to perform any act, or refuse to comply with any (name of grantee) requests
which would cause (name of grantee) to be in violation of the FTA terms and conditions.
31. DRUG AND ALCOHOL TESTING
49 U.S.C. §5331
49 CFR Parts 653 and 654
Applicability to Contracts
The Drug and Alcohol testing provisions apply to Operational Service Contracts.
Flow Down Requirements
Anyone who performs a safety -sensitive function for the recipient or subrecipient is required to
comply with 49 CFR 653 and 654, with certain exceptions for contracts involving maintenance
services. Maintenance contractors for non -urbanized area formula program grantees are not
subject to the rules. Also, the rules do not apply to maintenance subcontractors.
Model Clause/Language
Introduction
FTA's drug and alcohol rules, 49 CFR 653 and 654, respectively, are unique among the
Professional Services Agreement —January, 2005
53
Best Practices Procurement Manual — Appendix A.1 Page 54
regulations issued by FTA. First, they require recipients to ensure that any entity performing a
safety -sensitive function on the recipient's behalf (usually subrecipients and/or contractors)
implement a complex drug and alcohol testing program that complies with Parts 653 and 654.
Second, the rules condition the receipt of certain kinds of FTA funding on the recipient's
compliance with the rules; thus, the recipient is not in compliance with the rules unless every
entity that performs a safety -sensitive function on the recipient's behalf is in compliance with the
rules. Third, the rules do not specify how a recipient ensures that its subrecipients and/or
contractors comply with them.
How a recipient does so depends on several factors, including whether the contractor is covered
independently by the drug and alcohol rules of another Department of Transportation operating
administration, the nature of the relationship that the recipient has with the contractor, and the
financial resources available to the recipient to oversee the contractor's drug and alcohol testing
program. In short, there are a variety of ways a recipient can ensure that its subrecipients and
contractors comply with the rules.
Therefore, FTA has developed three model contract provisions for recipients to use "as is" or to
modify to fit their particular situations.
Explanation of Model Contract Clauses
Under Option 1, the recipient ensures the contractor's compliance with the rules by requiring the
contractor to participate in a drug and alcohol program administered by the recipient. The
advantages of doing this are obvious: the recipient maintains total control over its compliance
with 49 CFR 653 and 654. The disadvantage is that the recipient, which may not directly
employ any safety -sensitive employees, has to implement a complex testing program. Therefore,
this may be a practical option only for those recipients which have a testing program for their
employees, and can add the contractor's safety -sensitive employees to that program.
Under Option 2, the recipient relies on the contractor to implement a drug and alcohol testing
program that complies with 49 CFR 653 and 654, but retains the ability to monitor the
contractor's testing program; thus, the recipient has less control over its compliance with the drug
and alcohol testing rules than it does under option 1. The advantage of this approach is that it
places the responsibility for complying with the rules on the entity that is actually performing the
safety -sensitive function. Moreover, it reserves to the recipient the power to ensure that the
contractor complies with the program. The disadvantage of Option 2 is that without adequate
monitoring of the contractor's program, the recipient may find itself out of compliance with the
rules.
Under option 3, the recipient specifies some or all of the specific features of a contractor's drug
and alcohol compliance program. Thus, it requires the recipient to decide what it wants to do
and how it wants to do it. The advantage of this option is that the recipient has more control over
the contractor's drug and alcohol testing program, yet it is not actually administering the testing
Professional Services Agreement —January, 2005
54
Best Practices Procurement Manual — Appendix A.1 Page 55
program. The disadvantage is that the recipient has to specify and understand clearly what it
wants to do and why.
Drug and Alcohol Testing
Option 1
The contractor agrees to:
(a) participate in (grantee's or recipient's) drug and alcohol program established in
compliance with 49 CFR 653 and 654.
Drug and Alcohol Testing
Option 2
The contractor agrees to establish and implement a drug and alcohol testing program that
complies with 49 CFR Parts 653 and 654, produce any documentation necessary to establish its
compliance with Parts 653 and 654, and permit any authorized representative of the United
States Department of Transportation or its operating administrations, the State Oversight Agency
of (name of State), or the (insert name of grantee), to inspect the facilities and records associated
with the implementation of the drug and alcohol testing program as required under 49 CFR Parts
653 and 654 and review the testing process. The contractor agrees further to certify annually its
compliance with Parts 653 and 654 before (insert date) and to submit the Management
Information System (MIS) reports before (insert date before March 15) to (insert title and
address of person responsible for receiving information). To certify compliance the contractor
shall use the "Substance Abuse Certifications" in the "Annual List of Certifications and
Assurances for Federal Transit Administration Grants and Cooperative Agreements," which is
published annually in the Federal Register.
Drug and Alcohol Testing
Option 3
The contractor agrees to establish and implement a drug and alcohol testing program that
complies with 49 CFR Parts 653 and 654, produce any documentation necessary to establish its
compliance with Parts 653 and 654, and permit any authorized representative of the United
States Department of Transportation or its operating administrations, the State Oversight Agency
of (name of State), or the (insert name of grantee), to inspect the facilities and records associated
with the implementation of the drug and alcohol testing program as required under 49 CFR Parts
653 and 654 and review the testing process. The contractor agrees further to certify annually its
compliance with Parts 653 and 654 before (insert date) and to submit the Management
Information System (MIS) reports before (insert date before March 15) to (insert title and
address of person responsible for receiving information). To certify compliance the contractor
shall use the "Substance Abuse Certifications" in the "Annual List of Certifications and
Professional Services Agreement —January, 2005
55
Best Practices Procurement Manual — Appendix A 1 Pa. 56
Assurances for Federal Transit Administration Grants and Cooperative Agreements," which is
published annually in the Federal Register. The Contractor agrees further to [Select a, b, or c] (a)
submit before (insert date or upon request) a copy of the Policy Statement developed to
implement its drug and alcohol testing program; OR (b) adopt (insert title of the Policy
Statement the recipient wishes the contractor to use) as its policy statement as required under 49
CFR 653 and 654; OR (c) submit for review and approval before (insert date or upon request) a
copy of its Policy Statement developed to implement its drug and alcohol testing program. In
addition, the contractor agrees to: (to be determined by the recipient, but may address areas such
as: the selection of the certified laboratory, substance abuse professional, or Medical Review
Officer, or the use of a consortium).
Professional Services Agreement —January, 2005
56
All notices provided under this Agreement shall be effective when mailed, postage prepaid and
sent to the following addresses:
Professional: City: With Copy to:
In the event of any such early termination by the City, the Professional shall be paid for services
rendered prior to the date of termination, subject only to the satisfactory performance of the
Professional's obligations under this Agreement. Such payment shall be the Professional's sole
right and remedy for such termination.
5. Design, Proiect Indemnity and Insurance Responsibility. The Professional shall
be responsible for the professional quality, technical accuracy, timely completion and the
coordination of all services rendered by the Professional, including but not limited to designs,
plans, reports, specifications, and drawings and shall, without additional compensation,
promptly remedy and correct any errors, omissions, or other deficiencies. The Professional
shall indemnify, save and hold harmless the City, its officers and employees in accordance with
Colorado law, from all damages whatsoever claimed by third parties against the City; and for the
City's costs and reasonable attorneys fees, arising directly or indirectly out of the Professional's
negligent performance of any of the services furnished under this Agreement. The Professional
shall maintain commercial general liability insurance in the amount of $500,000 combined single
limits, and errors and omissions insurance in the amount of
6. Compensation. [Use this paragraph or Option 1 below.] In consideration of the
services to be performed pursuant to this Agreement, the City agrees to pay Professional a
fixed fee in the amount of ($ ) plus reimbursable direct costs. All such fees and
Professional Services Agreement —January, 2005
7
costs shall not exceed ($ ). Monthly partial payments based upon the
Professional's billings and itemized statements are permissible. The amounts of all such partial
payments shall be based upon the Professional's City -verified progress in completing the
services to be performed pursuant hereto and upon the City's approval of the Professional's
actual reimbursable expenses. Final payment shall be made following acceptance of the work
by the City. Upon final payment, all designs, plans, reports, specifications, drawings, and other
services rendered by the Professional shall become the sole property of the City.
6. Compensation. [Option 1] In consideration of the services to be performed
pursuant to this Agreement, the City agrees to pay Professional on a time and reimbursable
direct cost basis according to the following schedule:
Hourly billing rates:
Reimbursable direct costs:
with maximum compensation (for both Professional's time and reimbursable direct costs) not to
exceed ($ ). Monthly partial payments based upon the Professional's billings and
itemized statements of reimbursable direct costs are permissible. The amounts of all such
partial payments shall be based upon the Professional's City -verified progress in completing the
services to be performed pursuant hereto and upon the City's approval of the Professional's
reimbursable direct costs. Final payment shall be made following acceptance of the work by the
City. Upon final payment, all designs, plans, reports, specifications, drawings and other
services rendered by the Professional shall become the sole property of the City.
7. City Representative. The City will designate, prior to commencement of work, its
project representative who shall make, within the scope of his or her authority, all necessary and
proper decisions with reference to the project. All requests for contract interpretations, change
orders, and other clarification or instruction shall be directed to the City Representative.
Professional Services Agreement —January, 2005
8. Project Drawings. Upon conclusion of the project and before final payment, the
Professional shall provide the City with reproducible drawings of the project containing accurate
information on the project as constructed. Drawings shall be of archival, prepared on stable
mylar base material using a non -fading process to provide for long storage and high quality
reproduction. "CD" disc of the as -built drawings shall also be submitted to the owner in and
AutoCAD version no older then the established city standard.
9. Monthly Report. Commencing thirty (30) days after the date of execution of this
Agreement and every thirty (30) days thereafter, Professional is required to provide the City
Representative with a written report of the status of the work with respect to the Scope of
Services, Work Schedule, and other material information. Failure to provide any required
monthly report may, at the option of the City, suspend the processing of any partial payment
request.
10. Independent Contractor. The services to be performed by Professional are those
of an independent contractor and not of an employee of the City of Fort Collins. The City shall
not be responsible for withholding any portion of Professional's compensation hereunder for the
payment of FICA, Workers' Compensation, other taxes or benefits or for any other purpose.
11. Personal Services. It is understood that the City enters into this Agreement
based on the special abilities of the Professional and that this Agreement shall be considered as
an agreement for personal services. Accordingly, the Professional shall neither assign any
responsibilities nor delegate any duties arising under this Agreement without the prior written
consent of the City.
12. Acceptance Not Waiver, The City's approval of drawings, designs, plans,
specifications, reports, and incidental work or materials furnished hereunder shall not in any way
relieve the Professional of responsibility for the quality or technical accuracy of the work. The
Professional Services Agreement —January, 2005
X