HomeMy WebLinkAboutSTREETS PARK - BDR180010 - SUBMITTAL DOCUMENTS - ROUND 4 - PHOTOMETRIC PLAN (5)ARCHITECTURAL EGRESS Vandal Resistant
AEL Full Cut-0ff LED
Job Name
WALL MOUNT Fixture Type
LED
Catalog Number
Approved By
Date
5 Sutton Place
P.O. Box 2162
Edison, NJ 08818
P. 732.549.0056
www.9737luminaireled.net F. 732.549.
Rev: 06/17+
Luminaire LED Incorporated products are manufactured
in the USA with components purchased from USA
suppliers, and meet the Buy American requirements
under the ARRA. Content of specification sheets is subject to
change; please consult our website for current product information.
C UL ® US
Description The Architectural Egress Luminaire combines a unique, patented design shaped with high
performance, full cut-off optics to achieve completely unobtrusive illumination of a space or
path of egress. When mounted over a doorway, the fixture is perceived as an element of the
building structure and, additionally, provides water protection in the form of a drip cap over
the doorway. Multiple lengths are available to match a given door opening and our unique
quick mount system facilitates installation and maintenance.
Housing Marine grade heat treated extruded aluminum.
Chemically primed and finished with robotically applied polyester powder coat.
Wall Mount Marine grade heat treated extruded aluminum. Chemically primed and finished with
robotically applied polyester powder coat. Designed to provide quick mounting to housing
and secured with (2) captive stainless steel TORX® head screws.
Lens Frame Marine grade heat treated extruded aluminum, clear anodized. Secured to fixture via integral
concealed hinge and (3) captive stainless steel TORX® head screws.
Lens UV stabilized diffused extruded polycarbonate.
End Caps Die-cast marine grade aluminum continuously welded to housing. All welds ground smooth.
Reflector Electrostatically brightened anodized aluminum PVD coated and absolutely color-free of
iridescence. Shaped to provide full cutoff, LED point dispersion and maximum efficiency.
Drivers Constant current drivers at 350mA. High output version utilizes 700mA.
LED Samsung LM561B+ Series @ 3000K, 3500K, 4000K, or 5000K and 82 CRI wired in
parallel-series. L70 projected life of 130,000 hours at 50ºC. Tested in accordance with LM-80.
Ten year warranty on LED boards against operational defects.
Gaskets Closed cell self-adhesive neoprene to provide watertight seal between fixture and wall and
between fixture and lens frame.
UL Listing U.L., C.UL., Wet standard.
Lifetime Luminaire LED Incorporated will repair or replace any fixture damaged due to
Warranty vandalism for the lifetime of the installation.
SPECIFICATIONS
A B C
AEL 12 20.79 5.40 3.60
AEL 24 32.04 5.40 3.60
AEL 36 43.29 5.40 3.60
AEL 48 54.75 5.40 3.60
AEL 72 78.75 5.40 3.60
DIMENSIONAL DATA
A B
C
Vandal Resistant
Fixture Type AEL Full Cut-0ff LED
ARCHITECTURAL EGRESS
5 Sutton Place
P.O. Box 2162
Edison, NJ 08818
P. 732.549.0056
www.9737luminaireled.net F. 732.549.
Rev: 06/17+
Luminaire LED Incorporated products are manufactured
in the USA with components purchased from USA
suppliers, and meet the Buy American requirements
under the ARRA. Content of specification sheets is subject to
change; please consult our website for current product information.
ORDERING INFORMATION
SERIES LED CCT VOLTS LENS COLOR OPTIONS TX/SD
TX/SD
AEL 12 12” - 10W 3000K 120-277 DP BKH DIM EMBDA
AEL 24 24” - 10W 3500K 347 BZH A/B EMB310
AEL 36 24” - 20W 4000K SVH 2B EMB310ST
AEL 48 36” - 15W 5000K WOP PC EMB20R
AEL 72 36” - 30W PCP GLR EMB125R
48” - 20W CUST OCC EMB250R
48” - 35W OCC50 ST/SC
72” - 30W
72” - 55W
LENS DP = Diffused Polycarbonate.
COLORS BKH = Black BZH = Bronze SVH = Silver WOP = White PCP = Black CUST = Custom Color
(Hammertone) (Hammertone) (Hammertone) (Textured White) (Prime Coat Paintable) (Consult Factory)
DIM 0-10V dimming driver. 10% at lowest level. (N/A with AEL12)
A/B Aluminum surface back box. Finished with polyester powder coat to match the fixture.
PC Photoelectric switch.
2B (2) LED drivers for independent LED board operation. (N/A with AEL12, N/A with the OCC option)
GLR Fuse and fuse holder.
OCC Passive infrared sensor mounted in machine hole in end cap. Maximum coverage of 10’ radius from 8’ height.
OCC50 Passive infrared sensor mounted in machine hole in end cap.
50% of LED’s constantly on and 50% sensored. (N/A with AEL12)
EMB310 1000 lumen self-contained, 90 minute emergency battery pack. 0ºC (32ºF) to 55ºC (131ºF).
Not available in 347V. (Available for AEL 36, AEL48, and AEL72 lengths only)
EMB310ST 1000 lumen self-testing, self-contained, 90 minute emergency battery pack. 0ºC (32ºF) to 55ºC (131ºF).
Not available in 347V. (Available for AEL 36, AEL48, and AEL72 lengths only)
EMB20R Remote mounted micro inverter that will operate a 25W maximum load for 90 minutes.
0ºC (32ºF) to 45ºC (113ºF).
EMB125R Remote inverter that will operate a 125W maximum load for 90 minutes.
20ºC (68ºF) to 30ºC (86ºF). Not available in 347V.
EMB250R Remote inverter that will operate a 250W maximum load for 90 minutes.
20ºC(68ºF) to 30ºC (86ºF). Not available in 347V.
EMBDA Two drivers and two emergency battery packs self-contained within fixture for independent light
engine operation. Each battery pack will operate each light engine for a minimum of 90 minutes.
Not available in 347V. (Available in the 72” length only)
ST/SC Slotted screws instead of TORX® head.
TX/SD TORX® head bit.
OPTIONS
Fixture Type
ARCHITECTURAL EGRESS Vandal Resistant
AEL Full Cut-0ff LED
5 Sutton Place
P.O. Box 2162
Edison, NJ 08818
P. 732.549.0056
www.9737luminaireled.net F. 732.549.
Rev: 06/17+
Luminaire LED Incorporated products are manufactured
in the USA with components purchased from USA
suppliers, and meet the Buy American requirements
under the ARRA. Content of specification sheets is subject to
change; please consult our website for current product information.
PHOTOMETRIC DATA
Zone Lumens % Lamps
0 - 30 153 21.1
0 - 40 287 39.5
0 - 60 585 80.6
60 - 90 726 100.0
0 - 90 439 60.5
90 -180 0 0.0
0 - 180 726 100.0
MODEL AEL12-10W-4000K
Delivered Lumens: 726 Lumens
MODEL AEL36-15W-4000K
Delivered Lumens: 1213 Lumens
IES FILE: AEL12-10W-4000K
Total Power: 10.8W
IES FILE: AEL36-15W-4000K
Total Power: 14.09W
Zone Lumens % Lamps
0 - 30 381 31.4
0 - 40 635 52.3
0 - 60 1063 87.7
60 - 90 150 12.3
0 - 90 1213 100.0
90 -180 0 0.0
0 - 180 1213 100.0
Testing was performed in accordance with IES LM-79-08
Bug Rating: B0U0G0
30
60
90
30
60
90
Testing was performed in accordance with IES LM-79-08
Bug Rating: B0U1G0
Model Watts Input
Watts
Delivered Lumens
3000K 3500K 4000K 5000K
AEL 12 10W 10.8W 747 760 784 807
AEL 24 10W 9.4W 832 847 873 899
AEL 24 20W 17.6W 1557 1585 1634 1682
AEL 36 15W 14.9W 1248 1271 1310 1348
AEL 36 30W 26.3W 2995 3049 3143 3237
AEL 48 20W 18.8W 1935 1969 2030 2090
AEL 48 35W 35.2W 3616 3682 3796 3909
Fixture Type
ARCHITECTURAL EGRESS Vandal Resistant
AEL Full Cut-0ff LED
5 Sutton Place
P.O. Box 2162
Edison, NJ 08818
P. 732.549.0056
www.9737luminaireled.net F. 732.549.
Rev: 06/17+
Luminaire LED Incorporated products are manufactured
in the USA with components purchased from USA
suppliers, and meet the Buy American requirements
under the ARRA. Content of specification sheets is subject to
change; please consult our website for current product information.
PHOTOMETRIC DATA
MODEL AEL72-30W-4000K
Delivered Lumens: 3072 Lumens
IES FILE: AEL72-30W-4000K
Total Power: 27.09W
Zone Lumens % Lamps
0 - 30 771 25.1
0 - 40 1353 44.1
0 - 60 2529 82.3
60 - 90 3072 100.0
0 - 90 1718 17.7
90 -180 542 0.0
0 - 180 3072 100.0
30
60
90
MODEL AEL36-30W-4000K
Delivered Lumens: 2911 Lumens
IES FILE: AEL36-30W-4000K
Total Power: 28.6W
Zone Lumens % Lamps
0 - 30 754 25.9
0 - 40 1308 44.9
0 - 60 2417 83.0
60 - 90 494 17.0
0 - 90 2911 100.0
90 -180 0 0.0
0 - 180 2911 100.0
30
60
90
Testing was performed in accordance with IES LM-79-08
Bug Rating: B0U0G0
Testing was performed in accordance with IES LM-79-08
Bug Rating: B1U0G1
Fixture Type
ARCHITECTURAL EGRESS Vandal Resistant
AEL Full Cut-0ff LED
5 Sutton Place
P.O. Box 2162
Edison, NJ 08818
P. 732.549.0056
www.9737luminaireled.net F. 732.549.
Rev: 06/17+
Luminaire LED Incorporated products are manufactured
in the USA with components purchased from USA
suppliers, and meet the Buy American requirements
under the ARRA. Content of specification sheets is subject to
change; please consult our website for current product information.
MOUNTING PLATE DETAILS
�X3 �un�tion �o�
��� Ot�ers�
3��00
�����
3��00
��00
��00
���00
45���
���00
16�00
43�29
16�00
��00
���00
����0
��00
��00
��00
���55
�X3 �un�tion �o�
��� Ot�ers�
�X3 �un�tion �o�
��� Ot�ers�
�X3 �un�tion �o�
��� Ot�ers�
�X3 �un�tion �o�
��� Ot�ers�
�EL ��
�EL 4�
�EL 3�
�EL �4
�EL ��
Fixture Type
ARCHITECTURAL EGRESS Vandal Resistant
AEL Full Cut-0ff LED
5 Sutton Place
P.O. Box 2162
Edison, NJ 08818
P. 732.549.0056
www.9737luminaireled.net F. 732.549.
Rev: 06/17+
Luminaire LED Incorporated products are manufactured
in the USA with components purchased from USA
suppliers, and meet the Buy American requirements
under the ARRA. Content of specification sheets is subject to
change; please consult our website for current product information.
ALUMINUM BACKBOX DETAIL
A/B Detail
A B C
AEL 12 Backbox 20.80 5.20 1.50
AEL 24 Backbox 31.48 5.20 1.50
AEL 36 Backbox 43.30 5.20 1.50
AEL 48 Backbox 54.75 5.20 1.50
AEL 72 Backbox 78.75 5.20 1.50
B
C
A
A
B
AEL 72 30W 27.9W 3162 3217 3317 3417
AEL 72 55W 52.2W 5911 6017 6203 6389