Loading...
The URL can be used to link to this page
Your browser does not support the video tag.
Home
My WebLink
About
CITY OF FORT COLLINS UTILITIES CUSTOMER SERVICES BUILDING - PDP - PDP140005 - SUBMITTAL DOCUMENTS - ROUND 1 - PHOTOMETRIC PLAN (3)
Intense LIghtIng 2861 E. La Palma Ave. Anaheim, CA 92806 Phone: 800-961-5321 Fax: 800-961-5322 www.intenselighting.com Specifications and dimensions subject to change without notice. impression L/m-2013-0827 p-1 JOB NAME CATALOG NUMBER NOTES TYPE IL-DRTR / RTRD300 LED Downlight Round Trim Open Reflector Catalog Number Delivered Lumens * System Wattage ** iL-DrTr-L1 iL-DrTr-L2 iL-DrTr-L3 iL-DrTr-L4 862 lm @ 3000K 1168 lm @ 3000K 1471 lm @ 3000K 1761 lm @ 3000K 13.3W 19.6W 27.3W 31.4W * Delivered lumens output will vary depending on CCT, CRI and optic selection. ** System Wattage include driver and LED Module consumption. opTiCs - Precise center beam optics - Accessory holder can hold up-to 2 media - 16˚ Spot, 24° Narrow Flood, 37˚ Flood and 60˚ Flood LeD LiGHT enGine - 2700K, 3000K, 3500K and 4100K 82 CRI - 2700K and 3000K 92 CRI (R9 Value = 59) - 3 Step MacAdam (3 SDMC) - LED mounted to die-cast / extruded aluminum heat sink w/ active cooling - 50,000 hours average rated life at 70% output - LED light engine, SynJet and driver are all accessible from below the ceiling THermaL manaGemenT - L3 & L4 utilizes active thermal management with quiet and reliable operation noise rating below 22dBA. 100K hour lifetime. - L1 & L2 utilizes passive cooling eLeCTriCaL sYsTem - Power factor >.9, 50/60Hz - Multiple dimming drivers available (See Impression LED driver specification sheet) - Consult factory for DALI compatibility HoUsinG Heavy duty black powder coated .18 gauge steel frame. Standard plaster frame accommodates 5/8” ceiling thickness. Specify -1 for ceiling thickness up to 1”. Junction box and driver are located on opposite ends of the housing, with easy access for maintenance and installation. Trim speCiFiCaTion Specification grade reflectors made in USA. Reflector available in specular black, specular clear, haze or matte white. Architectural, discrete polished self flange or painted white flange options available. Meets RP-1 requirements with controlled light distribution at a 55° cut off. Intense LIghtIng 2861 E. La Palma Ave. Anaheim, CA 92806 Phone: 800-961-5321 Fax: 800-961-5322 www.intenselighting.com Specifications and dimensions subject to change without notice. impression L/m-2013-0827 p-2 JOB NAME CATALOG NUMBER NOTES TYPE Candelas at Nadir Degree CBCP 0° 5° 15° 25° 35° 45° 4499.16 3769.45 1380.14 347.89 7.72 4.16 16° spot (-16) Watts: 13.33 Lumens: 862.22 LPW: 64.7 CCT: 3197K CRI: 82.7 12’ 10’ 8’ 6’ 31.2fc 45fc 70.3fc 125fc 2.1’ 2.8’ 3.5’ 4.2’ Candelas at Nadir Degree CBCP 0° 5° 15° 25° 35° 45° 1313.78 1231.87 939.98 594.99 133.75 12.14 60° Flood (-60) Watts: 13.14 Lumens: 726.92 LPW: 55.34 CCT: 3132K CRI: 82.2 12’ 10’ 8’ 6’ Intense LIghtIng 2861 E. La Palma Ave. Anaheim, CA 92806 Phone: 800-961-5321 Fax: 800-961-5322 www.intenselighting.com Specifications and dimensions subject to change without notice. impression L/m-2013-0827 p-3 JOB NAME CATALOG NUMBER NOTES TYPE Candelas at Nadir Degree CBCP 0° 5° 15° 25° 35° 45° 7676.12 6431.14 2354.69 593.54 13.17 7.1 16° spot (-16) Watts: 27.34 Lumens: 1471.05 LPW: 53.8 CCT: 3309K CRI: 82.8 12’ 10’ 8’ 6’ 53.3fc 76.8fc 120fc 213fc 2.1’ 2.8’ 3.5’ 4.2’ Candelas at Nadir Degree CBCP 0° 5° 15° 25° 35° 45° 2353.97 2207.22 1684.21 1066.07 239.65 21.76 60° Flood (-60) Watts: 26.69 Lumens: 1302.46 LPW: 48.81 CCT: 3173K CRI: 81.56 12’ 10’ 8’ 6’ Intense LIghtIng 2861 E. La Palma Ave. Anaheim, CA 92806 Phone: 800-961-5321 Fax: 800-961-5322 www.intenselighting.com Specifications and dimensions subject to change without notice. impression L/m-2013-0827 p-45 JOB NAME CATALOG NUMBER NOTES TYPE impression accessories Catalog number Description impression DoWnLiGHT aCCessories pFL-CL1-s16 pFL-CL2-s16 pFL-CL4-s16 pL-CL5-s16 pL-CL6-s16 pL-CL9-s16 pFLmB-16 Prismatic Spread Lens Linear Spread Lens Solite Lens Amber Lens Red Lens Blue Lens Black Louver Impression Accessories Downlight Trim Accessories Rev. Date: 3/7/12 Notes: “A” 10.0" [ 254mm ] ø 4.0" [ 102mm ] 7.0" [ 177mm ] Model Dim. “A” Landscape-13 13" [330mm] Landscape-18 18" [457mm] Pathway 36" [914mm] Pathway 42" [1067mm] Pedestrian 96" [2438mm] THE EDGE® LED Pathway Light PWY Pathway Light SV Silver (Standard) BK Black WH White BZ Bronze PB Platinum Bronze D UL Universal 120–277V UH7 Universal 347–480V 12 120V 24 240V 27 277V 347 347V 487 480V 02 EDG PO2 P13 P34 P45 P86 40K 4000K Color Temperature9 F Fuse10,11,12 HL Hi/Low (175/350/525, dual circuit input)13,14 TL Two-Level (175/525 w/ integrated sensor control)13 TL2 Two-Level (0/350 w/ integrated sensor control)13 TL3 Two-Level (0/525 w/ integrated sensor control)13 WB Welded Base15 Rev. Date: 3/7/12 Field-Installed Accessories Photometrics THE EDGE® LED Pathway Light Retro-Fit Kit Used for replacement of existing bollards. XA-XBP8RSV XA-XBP8RBK XA-XBP8RWH XA-XBP8RBZ XA-XBP8RPB General Description Durable die-cast aluminum fixture housing mounts directly to 4" (102mm) diameter pole without visible mounting hardware for clean appearance. Pole mounts to rugged die cast aluminum internal flange secured by (3) 3/8-16 anchor bolts (provided) Note: T45 Torx 3/8 socket required for head installation. Top mounted LEDs for superior optical performance and light control. Five year limited warranty on fixture. Electrical Fixture lit by 18W high power, white, 5700K (+/- 500K per full fixture), minimum 70 CRI long life LED sources. 4000K (+/-3300K per full fixture) also available. 120–277V 50/60 Hz, Class 1 driv- ers are standard. 347–480V 50/60 Hz driver is optional. LED drivers have power factor >90% and THD <20% at full load. Units provided with integral 10kV surge suppression protection standard. Surge protection standard. Surge protection tested in accordance with IEEE/ANSI C62.41.2. Testing & Compliance UL listed in the U.S. and Canada for wet locations. Consult factory for CE Certified products. Fixture also available with CE listing. RoHS compliant. ENERGY STAR Qualified LED Lighting. Dark Sky Friendly. IDA Approved. Finish Exclusive Colorfast DeltaGuard® finish features an E-Coat epoxy primer with an ultra- durable silver powder topcoat, providing excellent resistance to corrosion, ultraviolet degradation and abrasion. Bronze, black, white and platinum bronze powder topcoats are also available. The finish is covered by our 10 year limited warranty. Fixture and finish are endurance tested to withstand 5,000 hours of elevated ambient salt fog conditions as defined in ASTM Standard B 117. Patents U.S. and international patents granted and pending. BetaLED is a division of Ruud Lighting, Inc. For a listing of Ruud Lighting, Inc. patents, visit www.uspto.gov. Made in the U.S.A. of U.S. and imported parts. Meets Buy American requirements within the ARRA. © 2012 Ruud Lighting Inc. – A Cree Company. All rights reserved. The information in this document is subject to change without notice. 9201 Washington Ave • Racine, WI 53406-3772 • 800-236-6800 • www.BetaLED.com PWY-EDG-3M 169 338 506 675 60° 90° 90° 60° 30° Candlepower Trace: Vertical plane through horizontal angle of maximum candlepower. 120º 120º 150º 150º 58.5º Position of vertical plane of maximum candlepower. 0' 0m Product Specifications - 53442 Job Name: Job Type: Quantity: Comments 53442 StarStrand 60" Aqua Star 24 3500K Finish Glass/Shade Product Category LED Tape Lamping Measurements Shipping Number of Bulbs 90 Width 0.42" Carton Weight 0.44 lbs Light Type LED Height 0.22" Carton Width 9" Bulb Type LED Length 60.00" Carton Height 1" Max Bulb Wattage 0.15 Extension N/A Carton Length 10" Max Fixture Wattage 13.5 Back Plate Width N/A Carton Cubic Feet 0.04 Rated Life ±30,000 Hours Back Plate Height N/A Master Pack 25 Rated Lumens ±640 HCO N/A Master Pack Weight 15.25 lbs Color Temp ±3,500 K Min Overall Height N/A Master Pack Width 11.03" Bulb(s) Not Included Max Overall Height N/A Master Pack Height 9.85" Light Up/Down N/A Hanging Weight 0.44 lbs Master Pack Length 25.20" Beam Spread 120 Height Adjustable N/A Master Cubic Feet 1.58 CRI 70-75 Slope N/A UPS Shippable Yes Photo Cell Included N/A Chain Length N/A Ballast/Driver/Transformer No Wire Length N/A Dimmable Magnetic Low-Voltage Canopy Width N/A Canopy Height N/A Canopy Length N/A Certification Other Equivalents Safety Rating Wet UPC Code Incandescent Watts 58.18 Energy Star No Shades Included N/A Fluorescent Watts 12.8 CA Title 24 No Crystals Included N/A CA Title 20 No Diffuser Included N/A ADA No Conversion Kit N/A Dark Sky N/A Material N/A Maxim Lighting International and all designs, logos and images © 2014 Maxim Lighting International. All Rights Reserved. Maxim Lighting International reserves the right, at any time, to make changes in the design and/or construction of the product including the discontinuation of product without prior notice. Color may vary from what is pictured above due to limitations inherent to photographic processes. Always consult a qualified, licensed electrician before installation of any product weighing 35 pounds or more. We recommend that a qualified, licensed electrician do the installation. Always install to a mechanically sound structure. 253 North Vineland Avenue | City of Industry, California 91746 | 800.486.2946p 800.486.7337f | www.maximlighting.com BetaLED SLM™ www.cree.com/lighting T (800) 236-6800 F (262) 504-5415 Rev. Date: 8/20/2012 * Light engine extrusion is painted to match housing ** Available with 20–40 LEDs, not available with UH voltage † See www.cree.com/lighting for warranty terms. ARE-SLM66 DA D Product Optic Mounting LED Count (x10) Version Voltage Color Options Drive Current Options ARE-SLM66 DA Direct Arm Mount 02 03 04 05 06 D UL Universal 120–277V UH Universal 347–480V SE* Silver (Standard) BE* Black ZE* Bronze PE* Platinum Bronze WE* White 1000** 1 Amp 700 700mA (Standard) 525 525mA 40K 4000K Color Temperature - Color temperature per luminaire DIM 0–10V Dimming - Control by others - Refer to dimming spec sheet for details - Can't exceed specified drive current F Fuse - When code dictates fusing, use time delay fuse - Not available with all ML options. Refer to ML spec sheet for availability with ML options ML Multi-Level www.cree.com/lighting T (800) 236-6800 F (262) 504-5415 © 2012 Cree, Inc. and/or one of its subsidiaries. All rights reserved. For informational purposes only. See www.cree.com/patents for patents that cover these products. Cree®, the Cree logo, BetaLED®, NanoOptic®, and Colorfast DeltaGuard® are registered trademarks, BetaLED SLM™ and the BetaLED Technology logo are trademarks of Cree, Inc. or one of its subsidiaries. Product Specifications COnSTRUCTIOn & MATERIALS • Luminaire housing is all aluminum construction • Standard luminaire includes 24" (610mm) cord for ease of installation • Drive current is field switchable • Mounting housing is rugged die cast aluminum and mounts to a minimum 3" (76mm) square or round pole and can be tilted +/- 5˚ • Luminaire is secured by two (2) 5/16-18 UNC bolts spaced on 2" (51mm) centers • Exclusive Colorfast DeltaGuard® finish features an E-Coat epoxy primer with an ultradurable powder topcoat, providing excellent resistance to corrosion, ultraviolet degradation and abrasion. Standard is silver. Bronze, black, white, and platinum bronze are also available ELECTRICAL SySTEM • Input Voltage: 120–277V or 347–480V, 50/60Hz, Class 1 drivers • Power Factor: > 0.9 at full load • Total Harmonic Distortion: < 20% at full load • Integral 10kV surge suppression protection standard • To address inrush current, type C/D breaker should be used REgULATORy & VOLUnTARy QUALIFICATIOnS • cULus Listed • Suitable for wet locations • Enclosure rated IP66 per IEC 60529 • Luminaire and finish endurance tested to withstand 5,000 hours of elevated ambient salt fog conditions as defined in ASTM Standard B 117 • Consult factory for CE Certified products • 10kV surge suppression protection tested in accordance with IEEE/ANSI C62.41.2 • RoHS Compliant • Dark Sky Friendly, IDA Approved • Meets Buy American requirements within ARRA Photometry All published luminaire photometric testing performed to IESNA LM-79-08 standards by Independent Testing Laboratories, a NVLAP certified laboratory. IES Files To obtain an IES file specific to your project consult: http://www.cree.com/lighting/tools-and-support/exterior-ies-configuration-tool Lumen Output, Electrical, and Lumen Maintenance Data * For more information on the IES BUG (Backlight-Uplight-Glare) Rating visit www.iesna.org/PDF/Erratas/TM-15-11BugRatingsAddendum.pdf. Vaild with no tilt. ** Projected L70 (10K) Hours: >60,000. For recommended lumen maintenance factor data see TD-13 IP66 BetaLED SLM™ LED Area Luminaire – Type III Medium – Direct Arm Mount ITL Test Report #: 69580 ARE-SLM66-3M-**-02-D-UL-1000-43K Initial Delivered Lumens: 4,078 STR-SLM-3M-**-02-D-UL-1000-40K Mounting Height: 25' (7.6m) A.F.G. Initial Delivered Lumens: 13,826 Initial FC at grade Type III Medium Distribution LED Count (x10) 5700K 4000K System Watts 120–480V Stainless Steel (SS) 1/8" thick 304 Grade Optics: (2) LED modules comprised of a closely packed array of small, discrete LED’s that creates a uniform linear light source. Modules and heat sink are enclosed in a cylindrical glass lens sealed with O-rings, to provide exceptional performance. Polished reflector directs the light outward uniformly. PASSO STEPLIGHT 12" LED STEPLIGHT (New Construction) Light Source Options / Properties Ordering Code Nominal Wattage Color Temp 85 CRI Initial Lumens No. of LEDS 2H30 4 3000 K 85 172 48 2H35 4 3500 K 85 176 48 2H40 4 4000 K 210 48 2F30 8 3000 K 85 344 84 2F35 8 3500 K 85 352 84 2F40 8 4000 K 85 410 84 www.amerluxexterior.com 5220 Shank Rd. Pearland, Texas 77581 (T) 281.997.5400 (F)281-997-5441 Amerlux reserves the right to change details that do not affect overall function and performance. Driver: Fully epoxy encapsulated for exceptionally cool operation and greatly extended life. Electronic constant voltage operation with over voltage and short circuit protection. 120 to 277v input. ELV dimmable at 120v only. Construction: Stainless steel driver enclosure and bracketing. Machined brass internal endcaps for optical chamber. Anodized aluminum heatsink. Composite, cast aluminum, or stailess steel faceplate. Application: Designed for new construction in steps and wall-mounted applications. PROJECT: TYPE: Electrostatic sensitive device. observe precautions for handling Part String Example: PSLT12 / BK / F35 U.7.24.13 PSLT12 LED AVAILABLE FACEPLATES Solid Color Composite (Standard) BlacK Beige Gray White Cast Aluminum (-A) Green Classic Bronze Black www.amerluxexterior.com 5220 Shank Rd Pearland, Texas 77581 T: (281)997-5400 F: (281)997-5441 Toll Free: (800)364-0098 ORDERING INFORMATION (Measurements shown in Inches) Front View 2.875 12.00 8.00 Side View 2.50 92° 1.737 4.00 .375 Top View 11.75 Composite faceplate (other materials available) Epoxy encapsulated driver (IP66) Reflector Stainless steel driver enclosure and brackets LED array and heatsink enclosed in a IP66 sealed glass tube Model # Faceplate Color BK - Black GY - Dark Gray BG - Beige WH - White PSLT12 (Standard Composite) GRN - Green CLB - Classic Bronze BLK - Black Custom PSLT12-A (Optional Aluminum) PSLT12-SS (Optional Stainless Steel) Brushed Stainless Steel Light Source 2F30 2F35 2F40 2H30 2H35 2H40 Polar graph 34 67 101 134 1 Maximum Candela = 134.19 Located At Horizontal Angle = 90 Vertical Angle = 75 Intense LIghtIng 2861 E. La Palma Ave. Anaheim, CA 92806 Phone: 800-961-5321 Fax: 800-961-5322 www.intenselighting.com Specifications and dimensions subject to change without notice. VORTECH L/M-025:14 P-29 JOB NAME CATALOG NUMBER NOTES TYPE IVG30L Round In-Ground LED DESCRIPTIOn The Intense stainless steel in-ground series is constructed of 316 marine grade stainless steel. The 316 marine grade stainless steel is cold worked and has superior corrosion resistance. Fixture is for use with a remote transformer (not included). fEaTuRES - Aesthetic appearance - Impact resistant long life stainless steel - Outdoor applications only - 10’ Cable standard with waterproof entry to fixture LED LIGHT EnGInE - High output CREE XPG2 LED - 3.8 Watts and 200+ lumens - 9-15V AC/DC Input - 2700K and 4000K - 40,000 hours average rated life at 70% output - 12° Narrow Spot, 20° Spot, 30° Narrow Flood and 40° Flood - Field interchangeable optics - IP67 Rated REMOTE TRanSfORMER For use with 12VAC remote class 2 transformer. Not included, see page 3. fInISH Marine grade 316 stainless steel. Ideal for applcations near the coast and other harsh environments. Stainless steel requires regular cleaning to ensure natural look and prevent tarnishing or tea staining. InSTaLLaTIOn Fixture is for concrete pour or in-ground applications. Optional housing must be ordered separately. Not for submersible installation. LISTInG / waRRanTy - ETL listed to US and Canadian standards for wet locations. - ETL drive over rated to 4000lbs. - 5-Year Intense Exterior Limited LED Warranty notes: 1. Custom powder coat finishes available, consult factory. Minimum order quantity apply. WET LOCaTIOn Catalog Number System Wattage * Delivered Lumens ** IVG30L40-12 IVG30L40-20 IVG30L40-30 IVG30L40-40 3.8W 3.8W 3.8W 3.6W Intense LIghtIng 2861 E. La Palma Ave. Anaheim, CA 92806 Phone: 800-961-5321 Fax: 800-961-5322 www.intenselighting.com Specifications and dimensions subject to change without notice. VORTECH L/M-025:14 P-30 JOB NAME CATALOG NUMBER NOTES TYPE All testing was conducted in accordance with LM-79-08, Approved Method: Electrical and Photometric Measurements of Solid-State Lighting Products as published by the Illuminating Engineering Society of North America (IESNA). Throw Distance (d) 4’ 8’ 12’ 16’ 20’ beam Diameter 1’ 1.9’ 2.9’ 3.8’ 4.8’ Illuminance (fc) 155 38.7 17.2 9.7 6.2 IVG30L40-12 (12° Narrow Spot) Report #: L11135001 Luminaire Watts: 3.76W Luminaire Lumens: 226.76 lm Lumens Per Watt: 60 Color Temperature: 3790K 10° 80° 70° 60° 50° 40° 20° 30° Polar Curve 619 1238 1856 2475 Throw Distance (d) 4’ 8’ 12’ 16’ 20’ beam Diameter 1.1’ 2.2’ 3.3’ 4.5’ 5.6’ Illuminance (fc) 110 27.4 12.2 6.8 4.4 IVG30L40-20 (20° Spot) Report #: L11135002 Luminaire Watts: 3.76W Luminaire Lumens: 235.44 lm Lumens Per Watt: 63 Color Temperature: 3792K 10° 80° 70° 60° 50° 40° 20° 30° Polar Curve 438 877 1315 1753 Throw Distance (d) 4’ 8’ 12’ 16’ 20’ beam Diameter 1.7’ 3.4’ 5.1’ 6.8’ 8.6’ Illuminance (fc) 47.6 11.9 5.3 3 1.9 IVG30L40-30 (30° Narrow Flood) Report #: L11135003 Luminaire Watts: 3.78W Luminaire Lumens: 205.83 lm Lumens Per Watt: 54 Intense LIghtIng 2861 E. La Palma Ave. Anaheim, CA 92806 Phone: 800-961-5321 Fax: 800-961-5322 www.intenselighting.com Specifications and dimensions subject to change without notice. VORTECH L/M-025:14 P-33 JOB NAME CATALOG NUMBER ClassTYPE 2 Magnetic Transformers NOTES Catalog # Magnetic Transformer Description ITMS-20 ITMS-20-27 ITMS-40 ITMS-40-27 ITMS-60 ITMS-60-27 ITMS-96 ITMS-96-27 Class 2 Magnetic Transformer 120V/12V Class 2 Magnetic Transformer 277V/12V Class 2 Magnetic Transformer 120V/12V Class 2 Magnetic Transformer 277V/12V Class 2 Magnetic Transformer 120V/12V Class 2 Magnetic Transformer 277V/12V Class 2 Magnetic Transformer 120V/12V Class 2 Magnetic Transformer 277V/12V 20W / 120V Input - 12VAC-2A Max. Output / 1 x 2A Breaker 20W / 277V Input - 12VAC-2A Max. Output / 1 x 2A Breaker 40W / 120V Input - 12VAC-3.3A Max. Output / 1 x 4A Breaker 40W / 277V Input - 12VAC-3.3A Max. Output / 1 x 4A Breaker 60W / 120V Input - 12VAC-5A Max. Output / 1 x 5A Breaker 60W / 277V Input - 12VAC-5A Max. Output / 1 x 5A Breaker 96W / 120V Input - 12VAC-8A Max. Output / 2 x 4A Breakers 96W / 277V Input - 12VAC-8A Max. Output / 2 x 4A Breakers Magnetic Transformers - 3 Year Warranty - Fully dimmable, with low-voltage magnetic dimmer - 1/8” Steel, powder coated NEMA 3R case - Standard with mandatory secondary protection - Meets class 2 output limits - Meets or exceeds all UL, cUL, ANSI/UL, and CSA requirements - Listed to the UL standards 2108 and 1838 - Mandatory secondary protection, as stated in the National ELectric Code Article 411 - May be used with individual “listed” components to meet “system” requirements, as long as parts listed to same ANSI/UL standard 8 1/2” 3 1/2” 3” 12 VOLT SySTEM watts Per Circuit (Maximum Wire Length) wire Size (Gauge) 20w 40w 60w #14 75’ 37’ 25’ #12 118’ 59’ 39’ #10 188’ 94’ 63’ #8 299’ 149’ 100’ #6 476’ 238’ 159’ VOLTaGE DROP fORMuLa Total Watts on Cable x Length of Run Cable Size Constant = Voltage Drop Cable Size Cable Size Constant Catalog # Project Comments Prepared by Type Date SPECIFICATION FEATURES Consult your representative for additional options and finishes. 01/16/2012 5:28:41 PM Specifications and Dimensions subject to change without notice. CUSTOM DESCRIPTION Boca 696 is a compact 6-1/4 inch diameter in-ground dimmable LED luminaire. It comes with standard with either an integral 12V step down transformer or a low voltage fixture, in which case a remote low voltage transformer is required. The integral transformer allows the fixture to be connected directly to 120V, 230V, 240V, 277V or 347V line voltage (specify). The adjustable lamp assembly provides +/- 23° vertical tilt and 360° horizontal rotation for precision uplighting, wall washing or general illumination in constricted areas. Designed for recessed mounting in concrete, brick, stone or dirt, it is suitable for drive-over applications. Fixture is also suitable for recessed mounting in indoor or outdoor wood flooring. A ... Material Recessed housing is constructed from corrosion-resistant stainless steel. Trim ring and trim collar are die cast from corrosion resistant solid brass. The trim ring and trim collar are also available in machined stainless steel, machined bronze or machined copper. B ... Finish Solid brass, bronze, copper or stainless steel trim ring and trim collar are unpainted to reveal the natural beauty of the material. Brass, bronze and copper will patina naturally over time. The brass trim ring and trim collar can also be painted a variety of standard colors or custom colors as requested. C ... Gasket Recessed housing and trim ring are sealed with a high temperature silicone o-ring gasket to prevent water intrusion. D ... Lens Minimum 1/4" thick tempered glass lens, factory sealed with high temperature adhesive to prevent water intrusion and breakage due to thermal shock. Suitable for drive-over applications up to 5000 pounds. E ... Hardware Stainless steel hardware is standard to provide maximum corrosion-resistance. F ... Socket Lumiere • Customer First Center • 1121 Highway 74 South • Peachtree City, GA 30269 • TEL 770.486.4800 • FAX 770.486.4801 01/16/2012 5:28:41 PM Specifications and Dimensions subject to change without notice. CUSTOM LAMP INFORMATION ORDERING INFORMATION BOCA 633 Lamp Watts Beam Spread CBCP °K Life (hrs.) Base Volts 6LED2712 6 12° 3358 2700 50000 GU5.3 bi-pin 12 6LED2721 6 21° 937 2700 50000 GU5.3 bi-pin 12 6LED2741 6 41° 472 2700 50000 GU5.3 bi-pin 12 6LED3012 6 12° 3694 3000 50000 GU5.3 bi-pin 12 6LED3021 6 21° 1019 3000 50000 GU5.3 bi-pin 12 6LED3041 6 41° 646 3000 50000 GU5.3 bi-pin 12 6LED4012 6 12° 4280 4000 50000 GU5.3 bi-pin 12 6LED4021 6 21° 1179 4000 50000 GU5.3 bi-pin 12 6LED4041 6 41° 754 4000 50000 GU5.3 bi-pin 12 6LED5712 6 12° 4496 5700 50000 GU5.3 bi-pin 12 6LED5721 6 21° 1275 5700 50000 GU5.3 bi-pin 12 6LED5741 6 41° 792 5700 50000 GU5.3 bi-pin 12 10LED2712 10 12° 5037 2700 50000 GU5.3 bi-pin 12 10LED2721 10 21° 1406 2700 50000 GU5.3 bi-pin 12 10LED2741 10 41° 708 2700 50000 GU5.3 bi-pin 12 10LED3012 10 12° 5513 3000 50000 GU5.3 bi-pin 12 10LED3021 10 21° 1521 3000 50000 GU5.3 bi-pin 12 10LED3041 10 41° 964 3000 50000 GU5.3 bi-pin 12 10LED4012 10 12° 6389 4000 50000 GU5.3 bi-pin 12 10LED4021 10 21° 1759 4000 50000 GU5.3 bi-pin 12 10LED4041 10 41° 1125 4000 50000 GU5.3 bi-pin 12 10LED5712 10 12° 6711 5700 50000 GU5.3 bi-pin 12 10LED5721 10 21° 1903 5700 50000 GU5.3 bi-pin 12 10LED5741 10 41° 1182 5700 50000 GU5.3 bi-pin 12 50MR16/NSP 50 12° 11,000 3050 4000 GU5.3 bi-pin 12 50MR16/NSL 50 25° 3200 3050 4000 GU5.3 bi-pin 12 50MR16/FL 50 40° 2000 3050 4000 GU5.3 bi-pin 12 50MR16/WFL 50 60° 1200 3050 4000 GU5.3 bi-pin 12 Voltage 120/12 120V to 12V Integral Transformer = Accessories Filters F71 = Peach Dichroic Filter, 2.00'' Dia F72 = Amber Dichroic Filter, 2.00'' Dia F73 = Green Dichroic Filter, 2.00'' Dia F74 = Medium Blue Dichroic Filter, 2.00'' Dia F75 = Yellow Dichroic Filter, 2.00'' Dia F76 = Red Dichroic Filter, 2.00'' Dia F77 = Dark Blue Dichroic Filter, 2.00'' Dia F78 = Light Blue Dichroic Filter, 2.00'' Dia F79 = Neutral Density Dichroic Filter, 2.00'' Dia F80 = Magenta Dichroic Filter, 2.00'' Dia F22 = Red Color Filter, 2.00'' Dia F33 = Blue Color Filter, 2.00'' Dia F44 = Green Color Filter, 2.00'' Dia F55 = Yellow Color Filter, 2.00'' Dia F66 = Mercury Vapor Color Filter, 2.00'' Dia Optical Lenses LSL = Linear Spread Lens (elongate standard beam spread), 2.00” Dia OSL = Overall Spread Lens (increase beam spread), 2.00'' Dia DIF = Diffused Lens (provide even illumination), 2.00'' Dia Optical Louver XTOR Crosstour LED APPLICATIONS: WALL / SurfACe POST / BOLLArd LOW LeveL fLOOdLIghT INverTed SITe LIghTINg lumaRk® SPeCIfICATION feATureS Construction slim, low-profile LED design with rugged one-piece, die-cast aluminum hinged removable door and back box. Matching housing styles incorporate both a small and large design. the small housing is available in 10W and 20W. the large housing is available in the 30W model. Patent pending secure lock hinge feature allows for safe and easy tool-less electrical connections with the supplied push-in connectors. Back box includes three (3) half-inch, NPt threaded conduit entry points. the universal back box supports both the small and large forms and mounts to standard 3-1/2” to 4” round and octagonal, 4” square, single gang and masonry junction boxes. Key hole gasket allows for adaptation to junction box or wall. External fin design extracts heat from the fixture surface. one- piece silicone gasket seals door and back box. Minimum 5" wide pole for site lighting application. Not recommended for car wash applications. Optical silicone sealed optical LED chamber incorporates a custom engineered mirrored anodized reflector providing high-efficiency illumination. optical assembly includes impact-resistant tempered glass and meets IEsNA requirements for full cutoff compliance. solid state LED Crosstour luminaries are thermally optimized with five (5) lumen packages in cool 5000K or neutral warm 3500K LED color temperature (CCt). Electrical LED driver is mounted to the die-cast housing for optimal heat sinking. LED thermal management Eaton 1000 Eaton Boulevard Cleveland, OH 44122 United States Eaton.com Specifications and dimensions subject to change without notice. Eaton’s Cooper Lighting Business 1121 Highway 74 South Peachtree City, GA 30269 P: 770-486-4800 www.cooperlighting.com Led Information XTOr1A XTOr2A XTOr2A-N XTOr3A XTOr3A-N Delivered Lumens (Wall Mount) 734 1432 1323 2649 2273 Delivered Lumens (With Flood Accessory Kit) 713 1424 1315 2614 2243 B.u.G. rating* B1-u0-G0 B1-u0-G0 B1-u0-G0 B1-u0-G0 B1-u0-G0 CCt (Kelvin) 5000 5000 3500 5000 3500 CrI (Color rendering Index) 67 65 68 65 68 Power Consumption (Watts) 8W 21W 21W 30W 30W * B.u.G. rating does not apply to fl oodlighting. LumeNS - CrI/CCT TABLe Ambient Temperature TM-21 Lumen Maintenance (72,000 Hours) Theoretical L70 (Hours) 10W Model 25°C > 91% > 350,000 40°C > 91% > 340,000 50°C > 91% > 330,000 20W Model 25°C > 91% > 340,000 40°C > 90% > 320,000 50°C > 90% > 300,000 30W Model 25°C > 91% > 340,000 40°C > 91% > 320,000 50°C > 90% > 300,000 LumeN mAINTeNANCe 10W Series 20W Series 30W Series XTOR1A=10W, 5000K, Carbon BronzeXTOR2A=20W, 5000K, Carbon BronzeXTOR3A=30W, 5000K, Carbon Bronze XTOR1A-WT=10W, 5000K, Summit White XTOR2A-N=20W, 3500K, Carbon BronzeXTOR3A-N=30W, 3500K, Carbon Bronze XTOR1A-PC1=10W, 5000K, 120V PC, Carbon BronzeXTOR2A-WT=20W, Summit White XTOR3A-WT=30W, Summit White XTOR2A-PC1=20W, 120V PC, Carbon BronzeXTOR3A-PC1=30W, 120V PC, Carbon Bronze STOCk OrderINg INfOrmATION 10W Series 20W Series 30W Series XTOR1A-WT-PC1=10W, 5000K, Summit White, 120V PC XTOR2A-PC2=20W, 5000K, 208-277V PC, Carbon BronzeXTOR3A-PC2=30W, 5000K, 208-277V PC, Carbon Bronze XTOR2A-WT-PC1=20W, 5000K, Summit White, 120V PC XTOR3A-WT-PC1=30W, 5000K, Summit White, 120V PC XTOR2A-WT-PC2=20W, 5000K, Summit White, 208-277V PC XTOR3A-WT-PC2=30W, 5000K, Summit White, 208-277V PC XTOR2A-N-WT=20W, 3500K, Summit White XTOR3A-N-WT=30W, 3500K, Summit White XTOR2A-N-PC1=20W, 3500K, 120V PC, Carbon BronzeXTOR3A-N-PC1=30W, 3500K, 120V PC, Carbon Bronze XTOR2A-N-PC2=20W, 3500K, 208-277V PC, Carbon BronzeXTOR3A-N-PC2=30W, 3500K, 208-277V PC, Carbon Bronze XTOR2A-N-WHT-PC1=20W, 3500K, Summit White, 120V PC XTOR3A-N-WHT-PC1=30W, 3500K, Summit White, 120V PC XTOR2A-N-WT-PC2=20W, 3500K, Summit White, 208-277V PC XTOR3A-N-WT-PC2=30W, 3500K, Summit White, 208-277V PC 5-dAy QuICk ShIP OrderINg INfOrmATION Voltage Model Series 10W 20W 30W 120V 0.06A 0.21A 0.29A 208V 0.04A 0.13A 0.18A 240V 0.04A 0.12A 0.16A 277V 0.03A 0.10A 0.14A 347V 0.03A 0.08A 0.11A CurreNT drAW XTOR Crosstour LED ADH111091 2013-10-18 08:53:35 Sample Number: XTOR2A-N-WT-PC1 Series 1 LED Kelvin Color 2 Housing Color Options (Add as Suffi x) Accessories (Order Separately) XTOR1A=Small Door, 10W XTOR2A=Small Door, 20W XTOR3A=Small Door, 30W [Blank]= Bright White (Standard) 5000K N=Neutral Warm White, 3500K [Blank]= Carbon Bronze (Standard) WT=Summit White 347V=347V 3 PC1=Photocontrol 120V 3 PC2=Photocontrol 208-277V 3, 4 HA=50ºC High Ambient 5 WG/XTOR=Wire Guard 6 XTORFLD-KNC=Knuckle Floodlight Kit 7 XTORFLD-TRN=Trunnion Floodlight Kit 7 XTORFLD-KNC-WT=Knuckle Floodlight Kit, White 7 XTORFLD-TRN-WT=Trunnion Floodlight Kit, White 7 EWP/XTOR= Escutcheon Wall Plate, Carbon Bronze EWP/XTOR-WT= Escutcheon Wall Plate, Summit White NOTES: 1 DesignLights Consortium® Qualifi ed. Refer to www.designlights.org Qualifi ed Products List under Family Models for details. 2 XTOR1A not available in 3500K. 3 Photocontrols are factory installed. 4 Order PC2 for 347V models. 5 Thru-branch wiring not available with HA option or with 347V. 6 Wire guard for wall/surface mount. Not for use with fl oodlight kit accessory. 7 Floodlight kit accessory supplied with knuckle (KNC) or trunnion (TRN) base, small and large top visors and small and large impact shields. OrderINg INfOrmATION system incorporates both conduction and natural convection to transfer heat rapidly away from the LED source. 10W models operate in -40°C to 40°C [-40°F to 104°F]. 20W and 30W models operate in -30°C to 40°C [-22°F to 104°F]. High ambient 50°C models available. Crosstour luminaires maintain greater than 70% of initial light output after 72,000 hours of operation. three (3) half-inch NPt threaded conduit entry points allow for thru-branch wiring. Back box is an authorized electrical wiring compartment. Integral LED electronic driver incorporates surge protection. 120-277V 50/60Hz or 347V 60Hz models. Finish Crosstour is protected with a super durable tGIC carbon bronze or summit white polyester powder coat paint. super durable tGIC powder coat paint finishes withstand extreme climate conditions while providing optimal color and gloss retention of the installed life. Warranty Five-year limited warranty. ADH111091 2013-10-18 08:53:35 the patent pending Lumark Crosstour™ LED Wall Pack series of luminaries provides an architectural style with super bright, energy efficient LEDs. the low-profile, rugged die-cast aluminum construction, universal back box, stainless steel hardware along with a sealed and gasketed optical compartment make the Crosstour impervious to contaminants. the Crosstour wall luminaire is ideal for wall/surface, inverted mount for façade/canopy illumination, post/bollard, site lighting, floodlight and low level pathway illumination including stairs. typical applications include building entrances, multi-use facilities, apartment buildings, institutions, schools, stairways and loading docks. deSCrIPTION Catalog # Type Date Project Comments Prepared by 10W & 20W 5-3/4" [146mm] 30W 6-5/8" [168mm] 10W & 20W 6-3/4" [171mm] 30W 8" [203mm] 10W & 20W 3-5/8" [92mm] 30W 4" [102mm] dImeNSIONS CerTIfICATION dATA uL/cuL Wet Location Listed LM79 / LM80 Compliant roHs Compliant ArrA Compliant ADA Compliant NoM Compliant Models IP66 Ingressed Protection rated Lighting Facts® registered DesignLights Consortium® Qualified* title 24 Compliant TeChNICAL dATA 40°C Maximum Ambient temperature External supply Wiring 90°C Minimum ePA Effective Projected Area: (sq. Ft.) Xtor1A/Xt0r2A=0.34 Xtor3A = 0.45 ShIPPINg dATA: Approximate Net Weight: 3.7 – 5.25 lbs. [1.7 – 2.4 kgs.] *www.designlights.org 10" [254mm] 17-1/2" [445mm] 10" [254mm] 17-1/2" [445mm] eSCuTCheON PLATeS LVR = Hex Cell Louver (reduce glare), 2.00'' Dia Series 696 6 1/4” dia. Boca Inground LED Uplight, 22° Tilt, 360° Rotation Source Finish Painted BK = Black BZ = Bronze CS = City Silver VE = Verde WT = White 6LED2712 6W 2700K, 12° Spot, GU5.3 Base 6LED2721 = 6W 2700K, 21° Narrow, GU5.3 Base 6LED2741 = 6W 2700K, 41° Wide, GU5.3 Base 6LED3012 = 6W 3000K, 12° Spot, GU5.3 Base 6LED3021 = 6W 3000K, 21° Narrow, GU5.3 Base 6LED3041 = 6W 3000K, 41° Wide, GU5.3 Base 6LED4012 = 6W 4000K, 12° Spot, GU5.3 Base 6LED4021 = 6W 4000K, 21° Narrow, GU5.3 Base 6LED4041 = 6W 4000K, 41° Wide, GU5.3 Base 6LED5712 = 16W 5700K, 12° Spot, GU5.3 Base 6LED5721 = 6W 5700K, 21° Narrow, GU5.3 Base 6LED5741 = 6W 5700K, 41° Wide, GU5.3 Base 10LED2712 = 10W 2700K, 12° Spot, GU5.3 Base 10LED2721 = 10W 2700K, 21° Narrow, GU5.3 Base 10LED2741 = 10W 2700K, 41° Wide, GU5.3 Base 10LED3012 = 10W 3000K, 12° Spot, GU5.3 Base 10LED3021 = 10W 3000K, 21° Narrow, GU5.3 Base 10LED3041 = 10W 3000K, 41° Wide, GU5.3 Base 10LED4012 = 10W 4000K, 12° Spot, GU5.3 Base 10LED4021 = 10W 4000K, 21° Narrow, GU5.3 Base 10LED4041 = 10W 4000K, 41° Wide, GU5.3 Base 10LED5712 = 10W 5700K, 12° Spot, GU5.3 Base 10LED5721 = 10W 5700K, 21° Narrow, GU5.3 Base 10LED5741 = 10W 5700K, 41° Wide, GU5.3 Base = 230/12 230V to 12V Integral Transformer = 240/12 240V to 12V Integral Transformer = 277/12 277V to 12V Integral Transformer = = 12 12 Volt Remote Transformer Required (not included) = Notes: * Integral Options Include 12V transformer. * See ACCESSORIES & TECHNICAL DATA section of the Lumière catalog for Mounting Accessories. * Consult your Cooper Lighting representative for additional options and nishes. Sample Number: 696-10LED2712-120/12-BK-F70 Premium Finishes NBR NBZ NCP NSS = = = = Natural Stainless Steel Natural Brass Natural Bronze Natural Copper Ceramic socket with 250° C Teflon® coated lead wires and GU5.3 bi-pin base. G ... Electrical When ordered as a line voltage fixture, an integral 12V transformer is included for connection to 120V, 230V, 240V, 277V, or 347V line voltage (specify). Bottom of line voltage fixtures include two 1/2-14 NPSM brass female conduit fittings for through wiring. When ordered as a low voltage fixture, a remote 12V transformer is required (not included). Sides of the low voltage fixture include two 1/2-14 NPSM brass female conduit fittings 180° apart for through wiring. NOTE: initial power draw on LED equipped fixtures is 15 watts. When sizing remote transformers use 15 watts per LED fixture. Nominal power draw after start up is 6 watts or 10 watts accordingly. H ... LED LED modules are included and are available in four color temperatures (2700,3000,4000,5700) and three distributions (spot, narrow, and flood). Both color temperature and distribution must be specified when ordering - see reverse side for details and catalog logic. I ... Labels & Approvals UL and cUL listed, standard wet label. Manufactured to ISO 9001-2000 Quality Systems Standard. IBEW union made. J ... Warranty Lumière warrants its fixtures against defects in materials & workmanship for three (3) years. Auxiliary equipment such as transformers, ballasts and lamps carry the original manufacturer's warranty. K ... Recessed Housing Recessed housing is available to ship in advance of complete fixture for rough-in purposes. Specify option -LBB and order separately the accompanying recessed housing from below. Finish must be specified on recessed housing as trim collar is permanently attached and sealed to the housing at the factory. Line Voltage 696-NBR-xxx/12-BB Brass line voltage recessed housing xxx specifies voltage: 120,230,240, 277 or 347 696-NBZ-xxx/12-BB Bronze line voltage recessed housing xxx specifies voltage: 120,230,240, 277 or 347 696-NCP-xxx/12-BB Copper line voltage recessed housing xxx specifies voltage: 120,230,240, 277 or 347 696-NSS-xxx/12-BB Stainless steel line voltage recessed housing xxx specifies voltage: 120,230,240, 277 or 347 696-yy-xxx/12-BB Painted brass line voltage recessed housing yy specifies painted finish: BK, BZ, CS, VE, WT xxx specifies voltage: 120,230,240, 277 or 347 BOCA 696 10W LED 6W LED Line Voltage w/ Integral 12V transformer Low Voltage Inground LUMIERE® #14 3500 #12 7500 #10 11920 #8 18960 #6 30150 Voltage Drop Chart Color Temperature: 3760K 10° 80° 70° 60° 50° 40° 20° 30° Polar Curve 190 381 571 761 Throw Distance (d) 4’ 8’ 12’ 16’ 20’ beam Diameter 2.1’ 4.2’ 6.4’ 8.6’ 10.1’ Illuminance (fc) 26.3 6.6 2.9 1.6 1.1 IVG30L40-40 (40° Flood) Report #: L11144201 Luminaire Watts: 3.6W Luminaire Lumens: 191.12 lm Lumens Per Watt: 53 Color Temperature: 3760K 10° 80° 70° 60° 50° 40° 20° 30° Polar Curve 105 211 316 421 Beam Diameter 8’ 6’ 4’ 2’ 0’ 2’ 4’ 6’ 8’ 4’ 8’ 12’ 16’ 20’ Throw Distance Beam Diameter 8’ 6’ 4’ 2’ 0’ 2’ 4’ 6’ 8’ 4’ 8’ 12’ 16’ 20’ Throw Distance Beam Diameter 8’ 6’ 4’ 2’ 0’ 2’ 4’ 6’ 8’ 4’ 8’ 12’ 16’ 20’ Throw Distance Beam Diameter 8’ 6’ 4’ 2’ 0’ 2’ 4’ 6’ 8’ 4’ 8’ 12’ 16’ 20’ Throw Distance 227 lm @ 4000K 235 lm @ 4000K 206 lm @ 4000K 191 lm @ 4000K * System wattage include driver and LED module consumption. ** Delivered lumen output will vary depending on CCT. SPECIfICaTIOn: Example: IVG30L27-30ST IVG30L SERIES Round In-Ground LED 27 40 CCT 2700K 4000K -12 -20 -30 -40 bEaM SPREaD 12° Narrow Spot 20° Spot 30° Narrow Flood 40° Flood ST fInISH 1 Brushed Stainless Steel -Sb aCCESSORy Sand Blasted Lens IVG30-H IVG30-HLC OPTIOnaL HOuSInG In-Ground Concrete Pour 3 11/16” 3 13/16” 2 7/8” Photometry .1 .2 .5 1 2 5 8w / 4000K Grid spacing is 2.5' Mounting Height = 1.00 Ft TOTAL CURRENT 50K Hours Projected Lumen Maintenance Factor @ 15˚C (59˚F)** Initial Delivered Lumens BUG Ratings* Per TM-15-11 Initial Delivered Lumens BUG Ratings* Per TM-15-11 120V 208V 240V 277V 347V 480V 350mA @ 25˚C (77˚F) 93% 02 2607 B1 U0 G1 2402 B1 U0 G1 38 0.32 0.20 0.19 0.18 0.12 0.10 03 3893 B1 U0 G1 3588 B1 U0 G1 55 0.45 0.28 0.25 0.23 0.16 0.13 04 5181 B2 U0 G2 4775 B2 U0 G2 70 0.58 0.35 0.31 0.28 0.21 0.16 05 6460 B2 U0 G2 5954 B2 U0 G2 88 0.74 0.43 0.38 0.34 0.26 0.19 06 7743 B2 U0 G2 7136 B2 U0 G2 106 0.89 0.52 0.46 0.40 0.31 0.23 525mA @ 25˚C (77˚F) 91% 02 3351 B1 U0 G1 3089 B1 U0 G1 52 0.43 0.27 0.24 0.22 0.15 0.12 03 5005 B2 U0 G2 4613 B2 U0 G2 74 0.62 0.37 0.33 0.29 0.22 0.16 04 6661 B2 U0 G2 6139 B2 U0 G2 94 0.79 0.46 0.41 0.36 0.28 0.20 05 8306 B2 U0 G2 7655 B2 U0 G2 118 0.99 0.58 0.51 0.45 0.34 0.25 06 9955 B3 U0 G3 9175 B3 U0 G3 142 1.20 0.69 0.60 0.53 0.41 0.30 700mA @ 25˚C (77˚F) 02 4375 B2 U0 G2 4033 B1 U0 G1 74 0.63 0.37 0.33 0.30 N/A N/A 87% 03 6535 B2 U0 G2 6023 B2 U0 G2 111 0.94 0.54 0.48 0.42 N/A N/A 04 8696 B3 U0 G3 8015 B2 U0 G2 141 1.19 0.68 0.60 0.52 N/A N/A 120˚ 120˚ 90˚ 90˚ 60˚ 60˚ 30˚ 30º 150˚ 150˚ 2241 1121 3362 4482 Candlepower Trace: Vertical plane through horizontal angle of maximum candlepower. Position of vertical plane of maximum candlepower. 20' 20' 20' 20' 40' 40' 40' 40' 6.1 0m 6.1 12.2 30.6 24.4 18.3 12.2 6.1 0m 6.1 12.2 18.3 24.4 30.6 0' 0' 12.2 18.3 24.4 18.3 60' 60' 80' 80' 100' 80' 100' CURB LINE 60' 60' .1 .2 .5 1 55˚ - Refer to ML spec sheet for details R NEMA Photocell Receptacle - Not available with all ML options. Refer to ML spec sheet ML for availability with ML options - Intended for horizontal mounting - Photocell by others TF Tool-Less Entry Product Description Luminaire housing is all aluminum construction. Drive current is field switchable. Convenient, interlocking mounting method. Mounting housing is rugged die cast aluminum and mounts to a minimum 3" (76mm) square or round pole and can be tilted +/- 5˚. Luminaire is secured by two (2) 5/16-18 UNC bolts spaced on 2" (51mm) centers. Standard luminaire includes 24" (610mm) cord for ease of installation. Performance Summary Utilizes BetaLED® Technology Patented NanoOptic® Product Technology Made in the U.S.A. of U.S. and imported parts CRI: Minimum 70 CRI CCT: 5700K (+/- 500K) Standard, 4000K (+/- 300K) Warranty: 5 years on luminaire/10 years on Colorfast DeltaGuard® finish† EPA and Weight: Reference EPA and Weight spec sheet Accessories Field Installed Accessories XA-BRDSPKSM20 Bird spikes for 20 LED light engine XA-BRDSPKSM50 Bird spikes for 30–50 LED light engine XA-BRDSPKSM60 Bird spikes for 60 LED light engine DIM “A” Cover/Door D-Ring Fastener (Tool-Less Entry) D-Ring Fastener (Tool-Less Entry) Direct Mount Adaptor Housing Light Engine 33.48" (850mm) # of LEDs Dim. “A” 20 30 38.28" (972mm) 40 43.51" (1105mm) 48.31" (1227mm) 53.10" (1348mm) 50 60 4.5" [114mm] 5.6" [142mm] ARE-SLM66-3M-DA IP66 BetaLED SLM LED Area Luminaire – Type III Medium – Direct Arm Mount 3M Type III Medium 3M Ordering Information Example: ARE-SLM66-3M-DA-02-D-UL-SE-700-OPTIONS 0m 1.5 1.5 1.5 1.53.0 3.0 3.0 3.04.6 4.6 4.6 4.66.1 6.1 6.1 7.6 6.17.6 0' 5' 5' 5' 5' 10' 10' 10' 10' 15' 15' 15' 15' 20' 20' 20' .1 .3 .5 1 2 5 20' 25' 25' CURB LINE Independent Testing Laboratories certified test. Report No. ITL171649. Candlepower trace of 4000K, 18 LED Type III Medium pathway luminaire with 1,161 initial delivered lumens operating at 350mA. All published luminaire photometric testing performed to IESNA LM-79-08 standards. Isofootcandle plot of 4000K, 18 LED Type III Medium pathway luminaire at 3' (.9 m) A.F.G. Luminaire with 1,150 initial delivered lumens operating at 350mA. Initial FC at grade. Product Family Optic Mounting # of LEDs LED Voltage Color Drive Current Factory-Installed Options ( x 9 ) Series Options Not Field Adjustable Please type additional options in manually on the lines provided above. 350 350mA 5258 525mA Made in the U.S.A. of U.S. and imported parts. Meets Buy American requirements within the ARRA. © 2012 Ruud Lighting Inc. – A Cree Company. All rights reserved. The information in this document is subject to change without notice. 9201 Washington Ave • Racine, WI 53406-3772 • 800-236-6800 • www.BetaLED.com PWY-EDG-3M 3M1 Type III Medium Footnotes 1. IESNA Type III Medium distribution 2. 13" (330mm) landscape fixture 3. 18" (18mm) landscape fixture 4. 3' (0.9m) pathway fixture (bollard) 5. 42" (1.68mm) pathway fixture (bollard) 6. 8" (2.4m) pedestrian fixture 7. Available with P3, P4 and P8 mounting options 8. Available with P1, P3, P4, and P8 mounting options 9. Color temperature per fixture; 5700K standard; minimum 70 CRI 10. Not available with all multi-level options. Refer to multi-level spec sheet for availability and additional information 11. When code dictates fusing use time delay fuse 12. Not available when UH, 34 or 48 voltage is selected 13. Refer to multi-level spec sheet for availability and additional information 14. Sensor not included 15. Standard on P8 mounting option; available with P1, P3 and P4 mounting options LED PERFORMANCE SPECS # of LEDs Initial Delivered Lumens – Type III Medium @ 5700K BUG Rating Initial Delivered Lumens – Type III Medium @ 4000K BUG Rating System Watts 120–277V Total Current @ 120V Total Current @ 208V Total Current @ 240V Total Current @ 277V System Watts 347–480V* Total Current @ 347V Total Current @ 480V L70 Hours** @ 25º C (77º F) 50K Hours Lumen Mainte- nance Factor** B U G B U G @ 15º C (59º F) 350mA Fixture Operating at 25º C (77º F) 18 1,248 1 1 1 1,150 1 1 1 22 0.18 0.12 0.10 0.10 28 0.09 0.13 >150,000 91% 525mA Fixture Operating at 25º C (77º F) 18 1,747 1 1 1 1,610 1 1 1 34 0.29 0.19 0.17 0.15 40 0.12 0.13 137,000 89% *Utilizes magnetic step-down transformer when 525mA drive **For recommended lumen maintenance factor data see TD-13 ***For more information on the IES BUG (Backlight-Uplight-Glare) Ratings current or multi-level options are selected visit www.iesna.org/PDF/Erratas/TM-15-11BugRatingsAddendum.pdf 16.3fc 23.5fc 36.8fc 65.4fc 4.1’ 5.4’ 6.8’ 8.1’ Candelas at Nadir Degree CBCP 0° 5° 15° 25° 35° 45° 3677.77 3533.22 2700.94 764.09 9.35 6.57 37° Flood (-37) Watts: 26.65 Lumens: 1395.94 LPW: 52.37 CCT: 3235K CRI: 82.3 12’ 10’ 8’ 6’ 25.5fc 36.8fc 57.5fc 102fc 3.8’ 5’ 6.3’ 7.5’ Candelas at Nadir Degree CBCP 0° 5° 15° 25° 35° 45° 3649.32 3236.02 1873.35 526.38 24.37 4.91 24° narrow Flood (-24) Watts: 26.4 Lumens: 1039.66 LPW: 39.39 CCT: 3156K CRI: 82.1 12’ 10’ 8’ 6’ 25.3fc 36.5fc 57fc 101fc 3’ 4’ 5’ 6’ Beam Diameter Footcandles at Nadir Throw Distance Candelas at Nadir Degree CBCP 0° 5° 15° 25° 35° 45° 9193 7702 2820 711 16 9 16° spot (-16) Watts: 31.43 Lumens: 1761.74 LPW: 56.05 CCT: 3170K CRI: 82.2 12’ 10’ 8’ 6’ 63.8fc 91.9fc 144fc 255fc 2.1’ 2.8’ 3.5’ 4.2’ Candelas at Nadir Degree CBCP 0° 5° 15° 25° 35° 45° 2759 2587 1974 1250 281 26 60° Flood (-60) Watts: 31.66 Lumens: 1526.57 LPW: 48.22 CCT: 3167K CRI: 82.4 12’ 10’ 8’ 6’ 19.2fc 27.6fc 43.1fc 76.6fc 4.1’ 5.4’ 6.8’ 8.1’ Candelas at Nadir Degree CBCP 0° 5° 15° 25° 35° 45° 4198 4033 3083 1794 11 8 37° Flood (-37) Watts: 31.6 Lumens: 1593.4 LPW: 50.43 CCT: 3132K CRI: 82.2 12’ 10’ 8’ 6’ 29.2fc 42fc 65.6fc 117fc 3.8’ 5’ 6.3’ 7.5’ Candelas at Nadir Degree CBCP 0° 5° 15° 25° 35° 45° 4459 3954 2289 643 30 6 24° narrow Flood (-24) Watts: 31.21 Lumens: 1270.33 LPW: 40.7 CCT: 3151K CRI: 82.5 12’ 10’ 8’ 6’ 31fc 44.6fc 69.7fc 124fc 3’ 4’ 5’ 6’ Beam Diameter Footcandles at Nadir Throw Distance To determine lux: Divide FC by 0.0929030436 (Example: 42fc / 0.0929030436 = 452.08 lux) Report #: L02136301 (-16) L02136304 (-24) L02136310 (-37) L02136307 (-60) iL-DrTr-L330 / rTrD300HZ iL-DrTr-L430 / rTrD300HZ Report #: L02136301 (-16) L02136304 (-24) L02136310 (-37) L02136307 (-60) 9.1fc 13.1fc 20.5fc 36.5fc 4.1’ 5.4’ 6.8’ 8.1’ Candelas at Nadir Degree CBCP 0° 5° 15° 25° 35° 45° 2027.17 1947.5 1488.75 421.16 5.15 3.62 37° Flood (-37) Watts: 13.12 Lumens: 769.44 LPW: 58.65 CCT: 3167K CRI: 82.2 12’ 10’ 8’ 6’ 14.1fc 20.3fc 31.7fc 56.3fc 3.8’ 5’ 6.3’ 7.5’ Candelas at Nadir Degree CBCP 0° 5° 15° 25° 35° 45° 2128.77 1887.68 1092.79 307.06 14.22 2.86 24° narrow Flood (-24) Watts: 12.95 Lumens: 606.47 LPW: 46.81 CCT: 3203K CRI: 83 12’ 10’ 8’ 6’ 14.8fc 21.3fc 33.3fc 59.1fc 3’ 4’ 5’ 6’ Beam Diameter Footcandles at Nadir Throw Distance Candelas at Nadir Degree CBCP 0° 5° 15° 25° 35° 45° 6094.16 5105.75 1869.41 471.22 10.46 5.64 16° spot (-16) Watts: 19.59 Lumens: 1167.88 LPW: 59.62 CCT: 3227K CRI: 82 12’ 10’ 8’ 6’ 42.3fc 60.9fc 95.2fc 169fc 2.1’ 2.8’ 3.5’ 4.2’ Candelas at Nadir Degree CBCP 0° 5° 15° 25° 35° 45° 1811.62 1698.68 1296.17 820.45 184.44 16.74 60° Flood (-60) Watts: 19.22 Lumens: 1002.38 LPW: 52.17 CCT: 3186K CRI: 82.3 12’ 10’ 8’ 6’ 12.6fc 18.1fc 28.3fc 50.3fc 4.1’ 5.4’ 6.8’ 8.1’ Candelas at Nadir Degree CBCP 0° 5° 15° 25° 35° 45° 2689.19 2583.49 1974.93 558.7 6.83 4.81 37° Flood (-37) Watts: 19.2 Lumens: 1020.71 LPW: 53.15 CCT: 3189K CRI: 82.5 12’ 10’ 8’ 6’ 18.7fc 26.9fc 42fc 74.7fc 3.8’ 5’ 6.3’ 7.5’ Candelas at Nadir Degree CBCP 0° 5° 15° 25° 35° 45° 2934.2 2601.89 1506.26 423.23 19.6 3.95 24° narrow Flood (-24) Watts: 18.95 Lumens: 835.93 LPW: 44.12 CCT: 3176K CRI: 82.5 12’ 10’ 8’ 6’ 20.4fc 29.3fc 45.8fc 81.5fc 3’ 4’ 5’ 6’ Beam Diameter Footcandles at Nadir Throw Distance To determine lux: Divide FC by 0.0929030436 (Example: 42fc / 0.0929030436 = 452.08 lux) Report #: L02136301 (-16) L02136304 (-24) L02136310 (-37) L02136307 (-60) iL-DrTr-L130 / rTrD300HZ iL-DrTr-L230 / rTrD300HZ Report #: L02136301 (-16) L02136304 (-24) L02136310 (-37) L02136307 (-60) insTaLLaTion Housing types include IC Air-Tight, CCEA (Chicago Plenum), or Non-IC Rated (must specify). Non-IC rated housings must be kept at a minimum of 3” away from insulation. Butterfly brackets and adjustable hanger bars (14”-25”) with integral nail included. Butterfly brackets are compatible with C-channel, flat bar hanger and EMT. C-channel are recommended for T-bar ceilings. Bar hangers must be ordered separately. emerGenCY BaCKUp Remote test switch included. Emergency driver operates LED load of up to 7.0 Watts at a maximum rated current (270 mA) for a minimum of 90 minutes. See submittal sheet IB-BSL17C-C2 for specifications. aCCessories Integral accessory holder accommodates (2) diffusion or color filters. See accessory submittal sheet for options. Accessory holder included with luminaire. LisTinG / WarranTY - 10 Year Intense LED Limited Warranty - ETL listed to US and Canadian standards for damp locations - (-AIC Only) Air Tight Certified ASTM E283 - (-AIC Only) ETL listed for direct contact w/insulation - (-CP Only) CCEA Chicago Plenum series Non-IC LED Air Tight IC LED CCEA LED LeD LiGHT enGine 13 Watts 19 Watts 27 Watts 31 Watts CCT / Cri 2700K / 82 CRI 2700K / 92 CRI 3000K / 82 CRI 3000K / 92 CRI 3500K / 82 CRI 4100K / 82 CRI DimminG Non-Dimming 0-10V Dimming Lutron Hi-Lume® 1% Lutron EcoSystem® VoLTaGe 120V 277V opTiC 16° Spot 24° Narrow Flood 37° Flood 60° Flood aCCessories Plaster Frame up to 1” Emergency Backup C-Channel Bar Hangers Flat Bar Hangers iL-DrTr-nC iL-DrTr-aiC iL-DrTr-Cp L1 1 L2 1 L3 1 L4 1 27 279 2 30 309 2 35 41 blank D10V LUT1 LUT blank 27 -16 -24 -37 -60 -1 -em -i100 -i200 Housing specification: Example: IL-DRTR-NCL227D10V-16-EM Trim specification: Example: RTRD300W-SF series Round Trimmed Open Reflector reFLeCTor FinisH Specular Black Specular Clear Haze Matte White Trim Self Flanged Self Flanged White rTrD300 B C HZ W 4 -sF -sFW 10 7/16” 7 1/4” 16 11/16” 15 1/2” 13 1/4” to 24” 20 3/4” 5 3/4” OD 4 3/8” ID Aperture 5 1/2” Cut-out 4 noTes: 1 - Delivered lumen output will vary depending on CCT, CRI and optic selection 2 - 97 CRI special order, consult factory 3 - Matte white reflector may only be specified with self flange trim 4 - IL-DRTR-L430-16 & L430-24 are CEC Listed