Loading...
HomeMy WebLinkAboutCANYON PLACE (331 S. MELDRUM) - PDP - PDP120023 - REPORTS - ALTERNATIVE COMPLIANCE REQUESTPage 1 of 1 BLUE OCEAN ENTERPRISES, INC | 416 W. Oak St. | Fort Collins, CO 80521 | 970.556.9111 DATE: 11/26/12 PROJECT: 331 S. Meldrum ‘Canyon Place’ TO: Current Planning: Attention Seth Lorson CC: Zoning: Attention Noah Beals CC: TAS: Attention Jeff Errett CC: APS: Attention Chuck Polson RE: Alternative Compliance for Site Lighting Code The following letter is in regard to the project ‘Canyon Place’ and identifies additional information the design team is submitting regarding the lighting plan under the Alternative Compliance method of the Land Use Code. Per our follow up meeting on 11/15/12 involving Seth Lorson with Current Planning, Noah Beals with Zoning, Jeff Errett With The Architect Studios, Chuck Polson with APS, and Brandon Grebe with Blue Ocean/Otterbox it was determined the best means to illustrate the lighting design and engineering intent was to submit this letter as well as additional information for an Alternative Compliance method per section E.3.2.4 of the Site Lighting code. Due to the limited nature of documentation that is required with the submittal package the team feels the photometric by itself does not reflect the true nature of the lighting design and engineering and as a standalone document does not meet the prescriptive code. The intent of the design team is to create a world class building that fits within the contexts of the neighborhood while at the same time resembling much of the same lighting elements the Otterbox HQ (209 South Meldrum Street) has to create a connection between the Otterbox buildings all while maintaining a safe environment. In the meeting on 11/15/12 it was decided the best method to examine what the lighting on the new Canyon Place building will look like and illuminate as was to view the Otterbox HQ building at night. Seth Larson, Noah Beals, and Jeff Errett met to review the lighting on the Otterbox HQ and all came away with an understanding that the building and site was appropriately lit even though the actual foot-candles were reading well under the 1.0 throughout much of the site (which the prescriptive method of the code mandates) as well as the type DD and KK fixtures were not polluting light up past the building. Page 2 of 1 BLUE OCEAN ENTERPRISES, INC | 416 W. Oak St. | Fort Collins, CO 80521 | 970.556.9111 In summary the design team feels the Alternative Compliance request should be granted for the following reasons. 1) The additional steps the team has taken to illustrate the true nature of the lighting on and around the building including walking the Otterbox HQ with Seth and Noah better accomplish the purpose of ensuring the overall lighting plan complies with all the standards of the lighting sections including building lighting, site lighting, and respecting the surrounding neighborhoods. 2) The proposed photometric plan and associated light levels are comparable to the lighting strategy utilized at OtterBox HQ (209 South Meldrum). The consensus after visiting that site was light levels there are generally adequate and appropriate for the neighborhood context and type of activity associated with the project, even though metered values were significantly less than the prescribed code minimum. 3) Illuminating surfaces such as landscape materials, tree trunks and canopies, fences and vertical building walls creates a perceptible boundary and edge, with a depth of field that adds to the overall sense of safety. Without this lighting, depth of field is lost and objects beyond the viewer’s immediate vicinity are absorbed into the darkness of the background. 4) The nature of the single sheet photometric does not accurately depict what the true lighting will be once the building is built so the additional information accomplishes the purpose of better painting the picture than strictly conforming to the lighting section. 5) Our approach is to illuminate the site by reflecting light off of architectural or natural elements while simultaneously shielding the lamp source from direct image glare. We will do this by selecting specific fixtures that allow us to controlling where the light is aimed with shields, placement and cut off optics. 6) The Otter Box Head Quarters located at 209 South Meldrum is an example of the exterior lighting environment we are trying to create. This example can be viewed at night to ascertain the value of the alternate approach we are proposing. 7) Our goals in this regard are as follows: a. Provide a safely illuminated environment. b. Enhance the neighborhood continuity and connectivity c. Foster non-vehicular access d. Eliminate any adverse effects of the lighting system on the adjacent properties. 8) The project team is proposing the following adjustments and accessories in order to mitigate the up-casting fixtures across from the neighbors: a. Honeycomb louvers b. Glare shield *This are indicated in the fixture schedule and cut sheets on E1.3 of the revised Photometric Plan dated 11.26.12 that is included in this submittal package. Page 3 of 1 BLUE OCEAN ENTERPRISES, INC | 416 W. Oak St. | Fort Collins, CO 80521 | 970.556.9111 9) The following pictures are from the building at 209 South Meldrum and represent what we are proposing for the new Canyon Place building regarding the fixtures in question. TYPE DD: TYPE KK: Light fixture location Page 4 of 1 BLUE OCEAN ENTERPRISES, INC | 416 W. Oak St. | Fort Collins, CO 80521 | 970.556.9111 Our goal matches the intent of the requirements outlined in the Fort Collins Land Use Code section 3.2.4. In the event the proposed design is built and the City believes we have not matched the intent we will work with the city to rectify the perceived deficiency. Thank you in advance for approval of this Alternative Compliance approach on the Canyon Place building. Attached: Photometric of Otterbox Head Quarters at 209 Meldrum By: Brandon Grebe Brandon.Grebe@blueocean-inc.com ACCESS DRIVE NEW PROPERTY LINE NEW FORT COLLINS, COLORADO PROJECT NUM: 230-12 SHEET NUMBER PRELIMINARY DESIGN 331 SOUTH MELDRUM STREET CANYON PLACE E1.0 1 PHOTOMETRIC SITE PLAN FORT COLLINS, COLORADO PROJECT NUM: 230-12 SHEET NUMBER PRELIMINARY DESIGN 331 SOUTH MELDRUM STREET CANYON PLACE E1.1 FORT COLLINS, COLORADO PROJECT NUM: 230-12 SHEET NUMBER PRELIMINARY DESIGN 331 SOUTH MELDRUM STREET CANYON PLACE E1.2 FORT COLLINS, COLORADO PROJECT NUM: 230-12 SHEET NUMBER PRELIMINARY DESIGN 331 SOUTH MELDRUM STREET CANYON PLACE E1.3 TYPE AA TYPE DD TYPE BB TYPE DD TYPE DD FORT COLLINS, COLORADO PROJECT NUM: 230-12 SHEET NUMBER PRELIMINARY DESIGN 331 SOUTH MELDRUM STREET CANYON PLACE E1.4 EM-WP Specifications Diameter: 17.0 (43.1) Flat lens height: 9.2 (23.4) Drop lens height: 10.0 (25.4) Arm mount EPA: 1.8 ft2 (0.17 m2 ) *Weight: 35.0 lbs (15.9 kg) Post-top EPA: 1.9 ft2 (0.18 m2 ) Overall height: 18.7 (47.5) *Weight as configured in example below. Accessories: Tenon Mounting Slipfitter18 Order as separate catalog number. Number of fixtures Tenon O.D. One Two@180° Two@90° Three@120° Three@90° Four@90° 2-3/8" (6) T20-190 T20-280 T20-290 T20-320 T20-390 T20-490 2-7/8" (7.3) T25-190 T25-280 T25-290 T25-320 T25-390 T25-490 4" (10.2) T35-190 T35-280 T35-290 T35-320 T35-390 T35-490 KVR1VG__ Vandal guard19 KVR1EHS__ External houseside shield19 KVR1EHSB External houseside shield, black16 H D A Catalog Number Notes Type Sheet #: KVR1-M-S AL-535 FEATURES & SPECIFICATIONS INTENDED USE – Use for parking lots, streets and surrounding areas. CONSTRUCTION – Heavy-gauge, spun aluminum housing. Integral structural support plate for mounting arm and electrical components ensures rigidity and strength. Hinged aluminum door frame incorporates stainless steel hardware. Continuous silicone gasketing surrounds lens for weather-tight seal. Lens: Thermal, shock-resistant, tempered flat or drop glass lens. FINISH – Standard finish is dark bronze, electrostatically applied powder paint. Linear embossed accent reveals are standard. Additional architectural colors and striping are available; see www.lithonia.com/archcolors. OPTICS – Most flat-lens configurations meet full-cutoff criteria. See www.lithonia.com for details. Vertical-lamp reflectors are one-piece spun and formed anodized aluminum. High-performance segmented aluminum reflectors also are used with horizontal lamps. Reflectors are rotatable and interchangeable. ELECTRICAL SYSTEM – Ballast: High pressure sodium ballast is high-reactance, high power factor. Metal halide 50-150W ballasts are high-reactance, high power factor and are standard with pulse-start ignitor technology. "SCWA" not required. Constant watt- age autotransformer for 175W MH (CSA, NOM or INTL required for probe start shipments outside the U.S.) Super CWA (pulse start ballast), 88% efficient and EISA legislation compliant, is required for 175-200W MH (SCWA option) for U.S. shipments only. Pulse start ballast (SCWA) is required for 200W MH. Ballast is 100% factory-tested. Socket: Porcelain, horizontally mounted medium base socket with copper alloy, nickel- plated screw shell and center contact. INSTALLATION – Arms are available for use with various poles, wall mounting and unique configurations. 4" aluminum fitter for open-top pole also is available. LISTING – Listed and labeled to UL standards for 25°C ambient and wet locations. Listed and labeled to CSA standards (see Options). NOM Certified (see Options). NOTE: Specifications subject to change without notice. Outdoor KVR1 Arm-Mounted or Post-Top Area Lighting Mounting Height Correction Factor (Multiply the fc level by the correction factor) 20 ft.= 2.25 25 ft.= 1.44 35 ft.= 0.73 40 ft.= 0.56 NOTES: 1 Photometric data for other distributions can be accessed from the Lithonia Lighting Web site (www.lithonia.com) 2 For electrical characteristics, consult technical data tab. 3 Tested to current IES and NEMA standards under stabilized laboratory conditions. Various operatingfactors can cause differences between laboratory and actual field measurements. Dimensions andspecifications are based on the most current available data and are subject to change. Sheet #: KVR1-M-S © 2007-2009 Acuity Brands Lighting, Inc., All rights reserved. Rev. 9/28/09 Existing Mounting Height New Mounting Height ()2 = Correction factor Lithonia Lighting Outdoor Lighting One Lithonia Way, Conyers, GA 30012 Phone: 770-922-9000 Fax: 770-918-1209 www.lithonia.com DISTANCE IN UNITS OF MOUNTING HEIGHT ISOILLUMINANCE PLOT (Footcandle) 150W lamp, rated 15800 lumens. Footcandle values based on 20' mounting height. Classification: Type V, Full Cutoff -2 -1 0 1 2 3 4 0123456 2.5 1.5 1 0.5 0.25 KVR1LTL15490 150S SYMFL TEST NO: DISTANCE IN UNITS OF MOUNTING HEIGHT ISOILLUMINANCE PLOT (Footcandle) 150W pulse start metal halide lamp, rated 14000 lumens. Footcandle values based on 20' mounting height. Classification: Unclassified (Type IV, Very Short), Cutoff -3 -2 -1 0 1 2 3 4 0123456 2.5 2.5 Specifications Length: 18.0 (45.7) Depth: 9.0 (22.8) Overall Height: 7.25 (18.4) *Weight: 30 lbs (13.6 kg) * Weight as configured in example below. All dimensions are inches (centimeters) unless otherwise specified. NOTES: 1 120V only. 2 Must be ordered with fixture; cannot be field installed. 3 Available with WT (wide throw) distribution only. 4 Available with WTUC and WTUP only. 5 Must specify CWI for use in Canada. 6 Optional multi-tap ballast (120, 208, 240, 277V); (120, 277, 347V in Canada). 8 Consult factory for available wattages. 9 Not available with SF, DF or QRS. 10 Not available with QRS or DCs. 11 Not available with EC or DCs. 12 Maximum wattage 100M, 70S. Options Shipped installed in fixture SF Single fuse 120, 277, 347V DF Double fuse 208, 240V DC12 Emergency circuit 12 volt (35W lamp included std.)9 2DC12 Emergency circuit 12 volt (2, 35W lamps included)9 DC2012 Emergency circuit 12 volt (20W lamp included)9 2DC2012 Emergency circuit 12 volt (2, 20W lamps included)9 ELED Emergency LED secondary source battery pack with time delay (-4°F min. operating temp)10,11,12,13 2ELED Emergency LED secondary source (two modules) battery pack with time delay (-4°F min. operating temp)10,11,12,13 DFL Diffusing lens EC Emergency circuit10,14 IBS Internal backlight shield15 PE Photoelectric cell-button type (n/a TB/TBV)2,16 QRS Quartz restrike system11,14 UCS Uplight component shield17 WLU Wet location door for up orientation CSA CSA Certified NOM NOM Certified INTL International shipment for 175M Shipped separately BBW Surface-mounted back box18 UT5 Uptilt 5 degrees18 WSR Metal Halide, High Pressure Sodium Building Mounted Sheet #: WSR-M-S © 2003-2009 Acuity Brands Lighting, Inc. All rights reserved. Rev. 10/26/09 Lithonia Lighting Outdoor Lighting One Lithonia Way, Conyers, GA 30012 Phone: 770-922-9000 Fax: 770-918-1209 www.lithonia.com Initial Lamp Lumens Mounting Height Metal Halide 10' 12' 14' 16' 50W MH 3,900 0.43 0.30 0.22 0.17 70W MH 5,500 0.62 0.43 0.31 0.24 100W MH 8,500 0.95 0.66 0.48 0.37 150W MH 12,500 1.41 0.98 0.72 0.55 175W MH 12,800 1.44 1.0 0.73 0.56 High Pressure Sodium 35W HPS 2,250 0.26 0.18 0.13 0.10 50W HPS 4,000 0.45 0.31 0.23 0.17 70W HPS 6,400 0.72 0.50 0.37 0.28 100W HPS 9,500 1.07 0.74 0.54 0.41 150W HPS 16,000 1.80 1.25 0.91 0.70 Emergency Option Lamp Compatibility Lamp Options (# lamps/wattages) DC12 2DC12 DC2012 2DC2012 EC ELED 2ELED 35S ■■■■■ ■■ 50S ■■■■■ ■■ 70S ■■■■■ ■■ 100S ■■■■■ 150S ■■■■■ 50M ■■■■■ ■■ 70M ■■■■■ ■■ 100M ■■■■■ ■■ 150M ■■■■■ 175M ■■■■■ DISTANCE IN UNITS OF MOUNTING HEIGHT ISOILLUMINANCE PLOT (Footcandle) 150W pulse start metal halide lamp, horizontal lamp orientation Footcandle values based on 12' mounting height, 14000 rated lumens. -2 -1 0 1 2 3 4 5 0123456 5 2.1.5 5 1 0.5 0.25 WSR 150MHC FT LTL11336P Luminaire Efficiency: 55.6% DISTANCE IN UNITS OF MOUNTING HEIGHT ISOILLUMINANCE PLOT (Footcandle) 150W pulse start metal halide lamp, horizontal lamp orientation Footcandle values based on 12' mounting height, 12500 rated lumens. Garage Cutoff Lighting Recessed Mount, Grid Ceiling KPS RMG METAL HALIDE 100W, 150W, 175W FEATURES & SPECIFICATIONS INTENDED USE — Use for parking garage applications. CONSTRUCTION — Rugged, heavy-gauge, lightweight, aluminum housing. Square- shaped, continuously seam-welded and ground smooth. EPT closed-cell housing gasket. Extruded, aluminum, hinged door frame is secured with two recessed, flush-fitting Phillips- head screws. Clear, tempered glass lens. Tamper-resistant fasteners also included. Trim -Pan is one-piece, 18 ga. steel with reinforcing lip factory assembled to housing. White, semi-gloss polyester powder finish is standard, with other architectural colors available. FINISH — Standard finish is white polyester powder (DWH), with other architectural colors available. OPTICAL SYSTEM — One-piece, hydroformed, anodized, aluminum reflectors. Four IES cutoff distributions available: Type II (Roadway); Type III (Asymmetric); Type IV (For- ward Throw); Type V (Symmetric). Reflectors hinge out for easy removal and are field interchangeable. R5 is vertically-lamped; R2, R3 and R4 are horizontally-lamped. Lens is impact-resistant, tempered glass. ELECTRICAL SYSTEM — Ballast: 100-150W are high reactance, high power factor and are standard with pulse-start ignitor technology. "SCWA" not required. Constant wattage autotransformer for 175M (CSA, NOM or INTL required for probe start shipments outside of the US). Super CWA (pulse start ballast), 88% efficient and EISA legislation compliant, is required for 175W (SCWA option) for US shipments only. Ballast is 100% factory-tested. Removable, unitized power module and positive locking disconnect plugs (primary and secondary). Ceramic metal halide lamps are recom- mended for use in applications where superior color rendition, lumen maintenance and longer lamp life are desired. Socket: Medium-base socket (100W), mogul-base socket (150,175W) with copper alloy, nickel-plated screw shell and center contact. UL listed 1500W, 600V, 4KV pulse-rated. LISTING — UL 1572 listed for recessed, wet location and covered ceilings only. Listed and labeled to comply with Canadian Standards (see Options). All dimensions are inches (centimeters) unless otherwise specified. H Standard Dimensions Square: 16-3/4 (42.5) Trim: 23-3/4 (60.3) Height: 10-1/2 (26.7) Weight: 28 lbs (16 kg) Catalog Number Notes Type Outdoor Example: KPS RMG 100M R2 120 SF Typical installation of KPS in a Recessed (Grid) Ceiling. ORDERING INFORMATION Choose the boldface catalog nomenclature that best suits your needs and write it on the appropriate line. Order accessories as separate catalog number. Sheet #: KPS RMG-M GC-210 Square Trim Series Options KPSRMG 100M KPSRMG 150M KPSRMG 175M Ceramic metal halide KPS 100MHC KPS 150MHC KPS RMG Recessed Mount (Grid Ceiling) Garage Cutoff Lighting Mounting Height Correction Factor (Multiply the fc level by the correction factor) 10 ft.= 0.64 12 ft.= 0.44 14 ft.= 0.32 NOTES: 1 Photometric data for other distributions can be accessed from the Lithonia Lighting website. (www.lithonia.com) 2 For electrical characteristics, consult technical data tab. 3 Tested to current IES and NEMA standards under stabilized laboratory conditions. Various operating factors can cause differences between laboratory and actual field measurements. Dimensions and specifications are based on the most current available data and are subject to change. Existing Mounting Height New Mounting Height 2 = Correction Factor Lithonia Lighting Outdoor Lighting One Lithonia Way, Conyers, GA 30012-3957 Phone: 770-922-9000 Fax: 770-918-1209 Sheet #: KPS-RMG-M ©1990 Acuity Brands Lighting, Inc., Rev. 6/29/09 www.lithonia.com Coefficient of Utilization Initial Footcandles DISTANCE IN UNITS OF MOUNTING HEIGHT ISOILLUMINANCE PLOT (Footcandle) 100W pulse start metal halide lamp, rated 8500 lumens. Footcandle values based on 20' mounting height. Classification: Type II, Short, Cutoff -3 -2 -1 0 1 2 3 4 0123456 2.5 1.15 0.5 0.25 KPS1197041610 100M R2 TEST NO: DISTANCE IN UNITS OF MOUNTING HEIGHT ISOILLUMINANCE PLOT (Footcandle) 100W pulse start metal halide lamp, rated 8500 lumens. Footcandle values based on 20' mounting height. Classification: Type III, Short, Cutoff -3 -2 -1 0 1 2 3 4 0123456 Type Catalog number ............................. ....................................................................................................... ............................. ....................................................................................................... ECSR4 DLED-110 Example: ECSR 35/10 4AR LD 120 LED Downlights 4" ECSR EcosTM Open Reflector NOTES 1. Not available with finishes. TRW standard. 2. Height of fixture increases 3". 3. SIMPLY5TM includes 9' S5 MLC Reloc wiring system (shipped separately). See simply5.net for more information. 4. Available in 120V or 277V only. 5. Consult factory for availability 6. For dimensional changes, refer to Technical Bulletins tab. 7. For compatible Reloc systems, refer to Technical Bulletins tab. All dimensions are inches (centimeters) Aperture: 4-3/8 (11.1) Ceiling Opening: 5-1/16 (12.9) Overlap Trim: 5-7/16 (13.8) Minimum of 9" required above fixture for non-accessible ceilings. ORDERING INFORMATION Choose the boldface catalog nomenclature that best suits your needs and write it on the appropriate line. Order accessories as separate catalog numbers (shipped separately). Series ECSR ECSR Finish (blank) Semi- specular LD Matte- diffuse Options SF Single fuse EL6 Emergency battery pack with integral test switch ELR6 Emergency battery pack with remote test switch TRW White painted flange TRBL Black painted flange LRC7 Provides compatibility with Lithonia Reloc® System. Access above ceiling required CP Chicago Plenum approved Aperture 4 DLED-110 ©2008, 2009 Acuity Brands Lighting, Inc. All Rights Reserved. 4" ECSR EcosTM Open Reflector ECSR4 35/10 4AR, 30W LED, 893 delivered lumens, 1.2 s/mh, Input watts: 30, Test no. LTL16994 Distribution Curve Distribution Data Output Data Coefficient of Utilization Illuminance Data at 30" Above Floor for a Single Luminaire NOTES: 1. For electrical characteristics, refer to Technical Bulletins tab. 2. Tested to current IES and NEMA standards under stabilized laboratory conditions. Various operating factors can cause differences between laboratory data and actual field measurements. Dimensions and specifications are based on the most current available data and are subject to change without notice. 3. Consult factory or IES file for microgroove baffle, black cone and other photometric reports. Photometric performance is measured in accordance with IESNA LM-79. For expanded options and updated photometric information, please visit www.gothamlighting.com or contact the factory directly. This product is protected by one or more of the following patents that are licensed from Renaissance Lighting, Inc.: 7,148,470. Gotham patents pending. 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 532 532 529 523 507 483 443 378 305 228 149 64 6 3 1 1 0 0 0 51 147 221 235 174 59 3 1 0 Zone Lumens % Lamp % Fixture 0° - 30° 0° - 40° 0° - 60° 0° - 90° 90° - 180° 0° - 180° 419.4 654.2 888.0 892.0 0.0 892.0 47.0 73.3 99.4 99.9 0.0 99.9 47.0 73.3 99.6 100.0 0.0 100.0 0° 10° 20° 30° 40° 50° 60° 70° 80° 90° 0 100 200 300 400 500 From 0° Ave Lumens pf 20% pc 80% 70% 50% pw 70% 50% 30% 10% 50% 30% 10%50% 30% 10% 0 1 2 3 4 5 6 7 8 9 10 119 112 105 99 92 86 81 76 71 67 63 119 109 100 91 83 76 70 65 60 55 51 119 106 95 85 77 69 63 57 53 48 45 119 104 91 80 71 64 58 52 48 44 40 116 107 98 90 82 75 69 64 59 55 51 116 104 94 84 76 69 62 57 52 48 44 116 102 90 80 71 64 58 52 48 44 40 111 103 95 87 80 73 68 62 58 54 50 111 101 91 82 74 68 62 56 52 48 44 111 99 88 78 70 63 57 52 47 43 40 50% beam 10% beam 62.7° 96.3° Mounting Height Inital FC Center Beam 8.0 10.0 12.0 14.0 16.0 17.6 9.5 5.9 4.0 2.9 6.7 9.1 11.6 14.0 16.4 8.8 4.7 2.9 2.0 1.5 12.3 16.7 21.2 25.7 30.1 1.8 0.9 0.6 0.4 0.3 Diameter FC Diameter FC Trim color AR Clear PR Pewter UBR Umber WTR Wheat GR Gold MB1 Black baffle WR1 White painted WB1 White baffle Voltage 120 277 3472 Color temperature 35/ 3500OK 41/ 4100OK Driver (blank) Solid state LED driver S53,4 SIMPLY5TM energy manage- ment system S5 HW4SIMPLY5TM energy manage- ment system less Reloc SYZT5 Sylvania 0-10V dimming ballast Nominal lumen output 10 1000 lms FEATURES OPTICAL SYSTEM • Self-flanged, semi-specular or matte-diffuse lower reflector in combination with highly reflective/diffuse upper reflector provides unparalleled performance and efficiency. Patented Bounding RayTM Optical Principle design (U.S. Patent No. 5,800,050) provides source before source image and smooth transition from top of the reflector to bottom. MECHANICAL SYSTEM • Housing accommodates a maximum 1-1/2" ceiling thickness. • Light engine and driver are accessible from above or below ceiling and can be upgraded to accommodate future technology improvements. • 16-gauge galvanized steel mounting bars with continuous 4" vertical adjustment are shipped pre-installed. Post installation adjustment possible without the use of tools from above or below ceiling. • Galvanized steel junction box with hinged access covers and spring latch. Three combination ½”-3/4" and one ½” knockout for straight-through conduit runs. Capacity: 8 (4in, 4out) No. 12 AWG conductors rated for 90°C. • Secondary housing adjustment system for precise, final ceiling to flange alignment. ELECTRICAL SYSTEM • Solid state LED light engine available in 3500° or 4100°K color temperatures. • Class P, thermally protected solid state driver. • Rated system life of 50,000 hours at 70% output. • Thermally activated insulation detector. • Emergency battery pack and SIMPLY5TM energy management system available. • Luminaire should be installed in applications where ambient temperatures do not exceed 50ºC. Ambient temperatures that exceed 50ºC will result in reduced lamp life and will void warranty. LISTING • Fixtures are UL Listed for thru-branch wiring, Non-IC recessed mounting and damp locations. Listed and labeled to comply with Canadian Standards. 6-1/16 (15.4) 15-1/4 (38.7) 14-3/16 (36.0) 2.1.5 5 1 0.5 0.25 KPS1188041202 100M R3 TEST NO: DISTANCE IN UNITS OF MOUNTING HEIGHT ISOILLUMINANCE PLOT (Footcandle) 100W pulse start metal halide lamp, rated 8500 lumens. Footcandle values based on 20' mounting height. Classification: Type V, Cutoff -3 -2 -1 0 1 2 3 4 0123456 1.5 1 0.5 0.25 KPS1188040502 100M R5 TEST NO: NOTES: 1 Multi-tap ballast (120, 208, 240, 277V). 2 For specific ordering information, refer to the KiloWatch brochure or consult factory. 3 Consult factory for use in Canada. 4 May be ordered as accessory. 5 Other architectural colors available; please see Architectural Colors brochure, form no. 794.3. 6 SCWA not available with 100M. Distribution R2 IES Type II Roadway R3 IES Type III Asymmetric R4 IES Type IV Forward Throw R5 IES Type V Symmetric Voltage 120 2083 2403 277 347 4803 TB1 Shipped installed in fixture SF Single fuse (120, 277, 347V) DF Double fuse (208, 240, 480V) QRS Quartz restrike system (100W max, 120V lamp not included) EC Emergency circuit CSA Listed and labeled to comply with Canadian Standards (120, 277, 347V only) INTL Available for 175M probe start shipping outside U.S. HS House side shield (R3 and R4 only) KW1 KiloWatch 120V control relay2,3 KW4 KiloWatch 277V control relay2,3 SCWA Super CWA pulse start ballast6 NOTE: For 175M shipments to U.S. territories, SCWA must be specified to comply with EISA. Architectural colors (powder finish)5 Standard colors DDB Dark bronze (standard) DWH White DBL Black Classic colors DMB Medium bronze DNA Natural aluminum DSS Sandstone DGC Charcoal gray DTG Tennis green DBR Bright red DSB Steel blue -2 -1 0 1 2 3 4 5 0123456 5 2.5 1.5 1 0.0.5 25 WSR 150MHC MD LTL11335P Luminaire Efficiency: 55.3% DISTANCE IN UNITS OF MOUNTING HEIGHT ISOILLUMINANCE PLOT (Footcandle) 150W pulse start metal halide lamp, horizontal lamp orientation Footcandle values based on 12' mounting height, 12500 rated lumens. -2 -1 0 1 2 3 4 5 0123456 5 2.1.5 1 5 0.5 0.25 WSR 150MHC MDU5 LTL11310P Luminaire Efficiency: 77.1% DISTANCE IN UNITS OF MOUNTING HEIGHT ISOILLUMINANCE PLOT (Footcandle) 150W pulse start metal halide lamp, horizontal lamp orientation Footcandle values based on 12' mounting height, 14000 rated lumens. -2 -1 0 1 2 3 4 5 0123456 5 2.5 1.1 5 0.5 0.25 WSR 150MHC WT LTL11337P Luminaire Efficiency: 68.1% DISTANCE IN UNITS OF MOUNTING HEIGHT ISOILLUMINANCE PLOT (Footcandle) 150W pulse start metal halide lamp, horizontal lamp orientation Footcandle values based on 12' mounting height, 14000 rated lumens. -2 -1 0 1 2 3 4 5 0123456 52.5 1.51 0.5 0.25 WSR 150MHC WTU LTL11312P Luminaire Efficiency: 69.7% WG Wire guard2 VG Vandal guard2 Series WSR High pressure sodium 35S1 50S 70S 100S 150S Metal halide 50M 70M 100M 150M 175M Voltage 120 2085 2405 277 347 TB6 23050HZ8 Distribution Downlight distributions FT Forward throw MD Medium throw (coated lamp std.) WT Wide throw Up/down distributions FTU Forward throw with 10% uplight MDU Medium throw with 10% uplight (coated lamp std.) WTU Wide throw with 10% uplight MDU5 Up/down medium throw with 50% uplight & 50% downlight (coated lamp std.) WTUP Pencil beam2,3 WTUC Column beam2,3 Outdoor Decorative Wall-Mounted Lighting WSR METAL HALIDE 50W-175W HIGH PRESSURE SODIUM 35W-150W Sheet #: WSR-M-S BM-120 FEATURES & SPECIFICATIONS INTENDED USE — For building- and wall-mounted applications. CONSTRUCTION — Rugged, die-cast, single-piece aluminum housing. Die-cast door frame has a 1/8” thick tempered glass lens. Door frame is fully gasketed with one-piece solid silicone. FINISH — Standard finish is textured dark bronze (DDBT) corrosion-resistant polyester powder finish.Additional architectural colors are available; see www.lithonia.com/ archcolors. Striping is also available. OPTICAL SYSTEM — Segmented reflectors for superior uniformity and control. Reflectors are interchangeable. Three full cutoff downlight distributions available: FT (forward throw), MD (medium throw) and WT (wide throw). Six uplight distributions available: FTU (forward throw, 10% up), MDU (medium throw, 10% up), WTU (wide throw, 10% up) and MDU5 (up/ down medium throw, 50% up 50% down), WTUP (pencil beam) and WTUC (column beam). ELECTRICAL SYSTEM — Ballast: 50W-150W utilizes a high reactance, high power factor ballast. Metal halide 150W and below are standard with pulse-start technology. 35S utilizes a reactance high power factor ballast. 175W utilizes a constant-wattage auto transformer ballast. Quick disconnect plug easily disconnects reflector from ballast. Ballasts are copper-wound and 100% factory-tested. CSA, NOM or INTL required for probe start shipments outside of the US for 175M. Not available 175M SCWA. Ceramic metal halide lamps are recommended for use in applications where superior color rendition, lumen maintenance and longer lamp life are desired. Socket: Porcelain, medium-base socket with copper alloy, nickel-plated screw shell and center contact. UL listed 660W, 600V 4KV pulse rated. INSTALLATION — Universal mounting mechanism with integral mounting support allows fixture to hinge down. Bubble level provides correct alignment with every installation. LISTING — UL Listed (standard). CSA Certified (see Options). Suitable for wet locations (damp location listed in lens-up orientation). WLU option offers wet location listing in up orientation (see Options). IP65 rated. 25°C ambient. NOTE: Specifications subject to change without notice. WSR Uplight color options4 BLUE Blue GRN Green RED Red YEL Yellow Catalog Number Notes Type For shortest lead times, configure product using standard options (shown in bold). Example: WSR 100M MD TB LPI ORDERING INFORMATION Ballast (blank) Magnetic ballast CWI Constant wattage isolated SCWA Super CWA pulse start ballast23 Accessories22 Order as separate catalog number. WSBBW Surface-mounted back box WSUT5 Uptilt 5 degrees Finish19 (blank) Dark bronze, textured DSST Sandstone, textured DNAT Natural aluminum, textured DWHG White, textured DBLB Black, textured CR Enhanced corrosion resistant CRT Non-stick protective coating20 Lamp21 LPI Lamp included L/LP Less lamp 13 Must specify 120V or 277V. 14 Maximum allowable wattage lamp included. 15 Not available with medium throw (MD, MDU, MDU5) distributions. 16 Not available with 347V. 17 Used with FTU and WTU distributions to conceal internal electrical components. 18 May be ordered as an accessory. 19 See www.lithonia.com/archcolors for additional color options. 20 Black finish only. 21 Must be specified. 22 Must specify finish. 23 Available with 150M or 150MHC only. Ceramic metal halide 50MHC 70MHC 100MHC 150MHC Wattage/source 1.5 1.5 1 1 0.5 0.5 0.25 0.25 KVR1LTL15550P 150MHC SR4SCDL BM TEST NO: DISTANCE IN UNITS OF MOUNTING HEIGHT ISOILLUMINANCE PLOT (Footcandle) 150W pulse start metal halide lamp, rated 14000 lumens. Footcandle values based on 20' mounting height. Classification: Unclassified (Type III, Very Short), Cutoff -3 -2 -1 0 1 2 3 4 0123456 2.1.15 5 0.0.25 5 KVR1LTL15553P 150MHC SR4SCFL TEST NO: Round Area Full Cutoff Lighting KVR1 METAL HALIDE 50-200W HIGH PRESSURE SODIUM 70-150W 10' to 20' Mounting Distribution5 Vertical lamp: SYM__ Symmetric square ASY__ Asymmetric High-performance horizontal lamp: SR2__ Type II roadway SR3__ Type III asymmetric SR4SC__ Type IV forward throw, sharp cutoff SR5S__ Type V square Options Shipped installed in fixture SF Single fuse 120, 277, 347V10 DF Double fuse 208, 240, 480V10 DC12 Emergency circuit 12V; 35W lamp included11 2DC12 Emergency circuit 12V; two 35W lamps included11 DC2012 Emergency circuit 12V; 20W lamp included11 2DC2012 Emergency circuit 12V; two 20W lamps included11 EC Emergency circuit11,12 PE Button-type photo cell1,10,13 QRS Quartz restrike system11,12 QRSTD Time delay11,12 KW1 KiloWatch® 120V control relay20 KW4 KiloWatch® 277V control relay20 EHS External houseside shield (matches fixture finish) EHSB External houseside shield,black (painted black to maximize light control) CSA Listed and labeled to comply with Canadian Standards NOM NOM Certified INTL Available for 175M probe start shipping outside the U.S. Shipped separately14 VG Vandal guard Wattage Voltage 120 2086 2406 277 347 4806 TB7 23050HZ8 Finish15 (blank) Dark bronze DBL Black DGC Charcoal gray DMB Medium bronze DNA Natural aluminum DWH White CR Corrosion resistant CRT Non-stick protective coating16 Lamp17 LPI Lamp included L/LP Less lamp Series KVR1 KVR1 Ballast (blank) Magnetic ballast CWI Constant wattage isolated NOTE: For shipments to U.S. territories, SCWA must be specified to comply with EISA. Metal halide 50M1,2 70M1,2 100M2 150M 175M3 200M3,4 Ceramic metal halide 50MHC 70MHC 100MHC 150MHC High pressure sodium2 70S 100S 150S Type RPD__ Round pole SPD__ Square pole WBD__ Wall bracket WWD__ Wood pole or wall PT4 Post top - 4" O.D. open-top pole For shortest lead times, configure product using standard options (shown in bold). Example: KVR1 100M SYMFL TB RPD09 L/LP ORDERING INFORMATION All dimensions are inches (centimeters) unless otherwise specified. NOTES: 1 Not available with 480V. 2 Not available with SCWA. 3 Not available SCWA with horizontal dis- tributions. 4 Must be ordered with SCWA. 5 For drop lens, specify DL. For flat lens, specify FL. Example: SYMDL or SYMFL. 6 Must specify CWI for use in Canada. 7 Optional multi-tap ballast (120, 208, 240, 277V; 120, 277, 347V in Canada). 8 Consult factory for available wattages. 9 12" arm required when two or more lumi- naires are oriented on a 90° drilling pattern. 10 Not available with TB. Must specify voltage. 11 EC, QRS, QRSTD and DC options cannot be ordered together. 12 Maximum allowable wattage lamp included. 13 Not available with 347V. 14 May be ordered as an accessory. 15 See www.lithonia.com/archcolors for addi- tional color options. 16 Black finish only. 17 Must be specified. 18 Arm mount only. 19 Specify finish. 20 Only available with 200M, with ASY or SYM. Length9 04 4" arm 06 6" arm 09 9" arm 12 12" arm Mounting Mounting Option Drilling Template SPDxx, RPDxx, 5 WBDxx 6 WWDxx 7