Loading...
HomeMy WebLinkAbout1200 N College Ave - Miscellaneous/Solar - 12/11/2012/�_/ r 1 / /Z Y ` )moo Co/le X ✓�e_ ZD�A2 Application 114 P1cification 3203 connectivity SolKlip* Grounding Clip Assembly 21 MAR 11 Rev F All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters [and Qinches]. Unless otherwise specified, dimensions have a tolerance of ±0.13 [±.005] and angles have a tolerance of ±2°. 1 Figures and illustrations are for identification only and are not drawn to scale. 1. INTRODUCTION This specification covers the requirements for application of SolKlip Grounding Clip Assembly used with metal -framed photovoltaic (PV) modules (or solar panels) and related products that require grounding for safety reasons. The grounding clip assembly consists of a slider, base, and a 10-32 self -captivating thread -cutting screw or 8-32 screw and hex nut or Keps nut. The screw is used to mount the grounding clip to the frame (of the solar panel). The slider is used to hold the wire. The slider features a multi -dimensional curved wire slot that provides enhanced wire retention. The base is used to terminate the wire. The base features pointed lances that provide four points of contact to the frame for high reliability and anti -rotation of the grounding clip. The removal slot accepts the tip of a flat -head screwdriver which is used to disengage the slider. When the slider is disengaged, the wire can be removed, and the screw is exposed for removal. When corresponding with TE Connectivity (TE) Personnel, use the terminology provided in this specification to facilitate your inquiries for information. Basic terms and features of this product are provided in Figure 1. 10-11 Base Removal Pointed Lances Slot (Qty: 4, Not Shown) 2. REFERENCE MATERIAL 2.1. Revision Summary 8-32 Sc Hex Nut or Keps Wire Slot Figure 1 • Updated document to corporate requirements • New logo 2.2. Customer Assistance SIMMONS Reference Product Base Part Number 1954381 and Product Code G922 are representative of SolKlip Grounding Clip Assembly. Use of these numbers will identify the product line and expedite your inquiries through a service network established to help you obtain product and tooling information. Such information can be obtained through a local TE Representative or, after purchase, by calling PRODUCT INFORMATION at the number at the bottom of this page. Keps is a trademark. ©2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company TOOLING ASSISTANCE CENTER 1-800-722-1111 This controlled document is subject to change. 1 Of 5 All Rights Reserved PRODUCT INFORMATION 1-800-522-6752 For latest revision and Regional Customer Service, TE logo is a trademark. visit our website at www.te.com LOC B *Trademark. Other product names, logos, or company names might be trademarks of their respective owners. TE [O,tl1KlIYliY 114-13203 SCREW SIZE FRAME DRILL SIZE SCREW TIGHTENING THICKNESS HOLE SIZE (Diameter) TORQUE Nm to Ibs ( [ � 1) 1.3 [.050] 4.09 [.161] 20 2.8 [.109] 4.22 [.166] 19 2.3+0.5/-0.2 10-32 [19+4.4/-1.7] 4.7 [.187J 4.37 [.172] tt/sa 6.4 [.250) 4.50 [.177] 16 8-32 6.6 [.260] Max 4.09-4.83 [.161-.190] — 1.7+0.5/-0.2 [15+4.4/-1.7] Figure 2 Grounding Clip with 10-32 Thread -Cutting Screw Grounding Clip with 8-32 Screw and Hex Nut or Keps Nut Mounting Screw Head Flush with Base; 5�"fl Base Flush with Frame Wire • Wire Wire Bottomed in Wire Slot Slider Covers Base; Wire is Terminated ^ � Frame Wire • TO ::_- I1 II 11 Figure 3 Screw Head Flush with Base Base Flush with Frame Nut is Tight Slider Covers Base; Wire is Terminated Rev 3of5 TE 114-13203 6. VISUAL AID Figure 4 shows a typical application of SolKlip Grounding Clip Assembly. This illustration should be used by production personnel to ensure a correctly applied product. Applications which DO NOT appear correct should be inspected using the information in the preceding pages of this specification and in the instructional material shipped with the product or tooling. SLIDER MUST NOT BE DAMAGED IN ANY WAY WIRE MUST NOT BE NICKED, CUT, OR SCRAPED WIRE MUST BE BOTTOMED IN SLIDER SCREW MUST BE — SECURE TO FRAME SCREW HEAD MUST BE FLUSH WITH BASE AND BASE MUST BE SLIDER MUST COVER FLUSH WITH FRAME BASE FRAME (Ref) FIGURE 4. VISUAL AID Rev F 5 of 5