HomeMy WebLinkAboutREGISTRY RIDGE SEVENTH FILING - Filed GC-GENERAL CORRESPONDENCE - 2016-09-13of
%mot. f
June 18, 2015
Kevin Brazelton, PE
United Civil Design Group, LLC
1501 Academy Ct. Ste 203
Fort Collins, CO 80524
Planning, Development & Transportation
Engineering Department
281 North College Avenue
P.O. Box 580
Fort Collins, CO 80522.0580
970.221.6605
970.221.6378 - fax
fcgov. com/engineering
Re: Registry Ridge Seventh Filing Variance Request (Minimum Driveway Spacing)
Mr. Brazelton,
This letter is in response to the variance request letter dated June 18, 2015 regarding a variance
request to Table 7-3 of the Larimer County Urban Area Street Standards to reduce minimum
driveway spacing.
The variance request to reduce the minimum distance between the driveway edges of Saipan
Court and the shared driveway for Lot 3 and Lot 4 of Block 1, shown on the Variance Exhibit,
from 30' to 23.31' is granted.
This request does not set precedence or change the application of our design standards in other
situations. If you have any questions, please contact me at 221-6573.
Sincerely,
Sheri L. Langenberger, P.E.
Attachments
cc: Martina Wilkinson, Civil Engineer II, Traffic Operations
file
UNITED CIVIL
Design Group
June 18, 2015
Engineering Development Review
City of Fort Collins Engineering
281 North College Avenue
Fort Collins, CO 80521
RE: Registry Ridge Seventh Filing Variance Request
Fort Collins, Colorado
Project Number: U14012
To whom it may concern:
Variance Request
Registry Ridge Seventh Filing
Fort Collins, CO
This letter is in regards to the Registry Ridge Seventh Filing project which is located west of
Shield$ Street and south of Trilby Road and is being submitted on behalf of the developer for
the project BCC, LLC. The Seventh Filing project is proposing to develop three parcels of
Registry Ridge into single family attached and detached lots. The project is currently in the
Final Compliance process and at this time a variance is requested to modify a portion of the
Larimer County Urban Area Street Standards (LCUASS) as follows:
Variance Item
Chapter 7 of LCUASS addresses the Street Design and Technical Criteria for public roadways.
More specifically, minimum distances between driveway edges are shown in Table 7-3.
Enterprise Drive is designated as a local street and therefore, would require a minimum
distance between driveway edges of 30-feet for a local commercial/industrial street
designation.
Alternate Design
The area in question along Enterprise Drive is at existing Tract B of Registry Ridge Second Filing
on the East side of Enterprise Drive. The area was originally planned for condominium units
and required only one driveway connection to Enterprise Drive. With the change in product to
single family attached lots, multiple driveway connections are required. Due to the width of
the lots and geometry of the existing Tract, the minimum distance of 30-feet has been reduced
to approximately 23-feet in one location between Saipan Court and the driveway for Block 1,
Lots 3 and 4. Refer to the Variance Request Exhibit attached with this letter.
Justification of Variance
Enterprise Drive is designated as a local street with a street section that is wider than the
typical residential street section. The current section more closely reflects an industrial street
UNITED CIVIL
Design Group u,
Variance Request
Registry Ridge Seventh Filing
Fort Collins, CO
section as shown in Chapter 7 of LCUASS. The change in product type to single family lots with
the park land across the street allows the area to function as a typical residential area. LCUASS
Table 7-3 requires a minimum of 12-feet between driveway edges for a residential local
roadway, significantly less than the proposed 23-feet. It is the opinion of United Civil that the
minimum distance between the driveway connections of 23-feet will not be detrimental to the
public health, safety and welfare, and will not reduce design life of the improvement nor cause
the Local Entity additional maintenance costs.
If you should have any questions or comments this variance request please feel free to contact
us at your convenience.
Sincerely,
United Civil Design Group, LLC
Kevin Brazelton, PE
Engineering Manager
CONNNECT TO EXISTING
CURB, GUTTER & SIDEWALK
TYPE I DRIVEWAY
APPROACH
30' EXISTING
ANITARY EASEMENT
PROPERTY CORNER
N:1422191.28
E:3112790.49
LOT
23.31' (PER
VARIANCE REQUEST)
1
11i"
Civil Engineering & Consulting
1501 Academy Ct., Ste. 203
Fort Collins, CO 80524
UNITED CML (970) 530-4044
Design Group www.unitedcivll.com
36' WIDE DUAL TYPE I
DRIVEWAY APPROACH
LOT
� y .
& SIDEWALK
N=1422446.86
E=3112857.20 LOT 2
36' WIDE DUAL TYPE I
DRIVEWAY APPROACH
LOT
1
LOT
LOT I
N=1422370.90
• DRIVE -OVER
EI 3112846.92 F CURB & GUTTER ITYP.)
OUTLOT A
LOT6
22.25' : SAI.PAN ouR7 : ....:.
.; . EP-EP ; • TRACT A :...:
:(PRIVATE DRIVE) . ::... 4.
:.::. . .
BLO K2
2' CURB CUT
I I & SIDEWALK CHASE
• I LOT
• a 36' WIDE DUAL TYPE I
DRIVEWAY APPROACH LOT 3 LOT 4
I LOT2
N=1422244.74
E=3112845.39
i
PROPERTY CORNER - - - - - - .
N:1422196.22 Am
66' ROW —
E:3112856.49 IF-
�
z
— — — — — — — — — — — — — — Z
0 20' 40'
SCALE: 1" = 40'
REGISTRY RIDGE SEVENTH FILING
VARIANCE REQUEST EXHIBIT
6/18/2015